Ikea KLUNSA LED Spotlight and Clamp د کارن لارښود

1. محصول ختم شوview

The Ikea KLUNSA LED Spotlight and Clamp is a versatile, battery-operated lighting solution designed for small or multi-purpose spaces. Its portable design allows for flexible placement using either a clamp or permanent screw installation. The integrated LED light source offers energy efficiency and a long lifespan. The light activates with a touch and features an automatic shut-off after 30 minutes.

کلیدي ځانګړتیاوې:

• د بې تار اسانتیا لپاره د بیټرۍ چلول شوی.
• Flexible mounting options: clamp or screw installation.
• Touch-activated operation with 30-minute automatic shut-off.
• د انرژي وړ LED څراغ سرچینه.
• Provides focused light for smaller areas.

This image shows the KLUNSA LED Spotlight providing illumination within a dark closet space, highlighting its utility for discreet and effective lighting in confined areas. The compact design allows it to be mounted unobtrusively.

2. د خوندیتوب معلومات

Please read and understand all safety instructions before using the product. Keep this manual for future reference.

• د بیټرۍ خوندیتوب:
  • Use only the specified battery type (AAA, not included).
  • زاړه او نوي بیټرۍ، یا د بیټرۍ مختلف ډولونه مه ګډوئ.
  • د درست قطبي کیدو سره بیټرۍ دننه کړئ (+/-).
  • Remove depleted batteries promptly to prevent leakage.
  • بیټرۍ ډیر تودوخې یا اور ته مه ښکاره کوئ.
  • بیټرۍ د ماشومانو له لاسرسي لرې وساتئ.
• د محصول ځای په ځای کول:
  • Ensure the spotlight is securely mounted, whether by clamp or screws, to prevent it from falling.
  • Do not place the spotlight in direct contact with water or high humidity, as it is not water resistant.
  • Avoid placing the spotlight near heat sources or in direct sunlight.
• LED څراغ:
  • Do not stare directly into the LED light source, as it may cause eye strain.
  • The LED light source is not replaceable. Do not attempt to disassemble the lamp.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټولې برخې په بسته کې شتون لري:

• Ikea KLUNSA LED Spotlight unit
• یوځای شوی clamp میکانیزم
• Mounting screws (for permanent installation option)
• د کارونکي لارښود (دا لاسوند)

Note: Batteries (AAA) are not included and must be purchased separately.

4. ترتیب کول

4.1 د بیټرۍ نصب کول

1. Locate the battery compartment cover on the back of the spotlight unit.
2. پوښ په نرمۍ سره تاو کړئ یا یې وغورځوئ ترڅو خلاص یې کړئ.
3. دوه AAA بیټرۍ دننه کړئ، د سم قطبیت (+ او -) ډاډ ترلاسه کړئ لکه څنګه چې د خونې دننه ښودل شوي.
4. د بیټرۍ د خونې پوښ بدل کړئ، ډاډ ترلاسه کړئ چې دا په خوندي ډول تړل شوی دی.

دا انځور یو روښانه view of the open battery compartment, illustrating how two AAA batteries (specifically "LADDA 2450" batteries are shown) should be placed with their positive and negative terminals aligned correctly.

4.2 د نصبولو اختیارونه

The KLUNSA spotlight offers two installation methods:

4.2.1 کلیکamp نصب کول

د لنډمهاله یا انعطاف منونکي ځای پرځای کولو لپاره، مدغم شوي cl وکاروئamp:

1. Identify a suitable surface (e.g., shelf edge, cabinet partition) where the clamp په خوندي توګه نیول کیدی شي.
2. cl خلاص کړئamp د لیور په فشارولو سره.
3. Position the spotlight and release the lever to secure the clamp onto the desired surface.
4. Ensure the spotlight is stable and does not wobble.

This image demonstrates the KLUNSA spotlight clamped onto the edge of a white shelf, providing illumination to the items below. It highlights the ease of repositioning the light without permanent fixtures.

4.2.2 Screw Installation (Permanent)

For a more permanent fixture, use the provided screws:

1. Choose a desired mounting location.
2. Mark the positions for the screws using the spotlight's mounting bracket as a guide.
3. Drill pilot holes if necessary, appropriate for the screw size and material.
4. Secure the spotlight to the surface using the provided screws.
5. Ensure the spotlight is firmly attached and stable.

This image illustrates two KLUNSA LED Spotlights permanently installed via screws on the underside of a cabinet shelf, providing downward illumination. This setup is ideal for consistent lighting in areas like wardrobes or display cabinets.

5. عملیاتي لارښوونې

The KLUNSA LED Spotlight is designed for simple, touch-activated operation.

1. د فعالولو لپاره: Gently touch the surface of the spotlight. The LED light will illuminate.
2. اتومات بندول: The spotlight is equipped with an automatic timer and will turn off by itself after approximately 30 minutes of continuous operation.
3. To Turn Off Manually: If you wish to turn off the light before the 30-minute timer expires, simply touch the surface of the spotlight again.

This image shows the KLUNSA LED Spotlight in operation, casting a bright, focused light on items placed on a glass shelf inside a cabinet, demonstrating its effectiveness in illuminating specific areas.

6. ساتنه

Regular maintenance ensures optimal performance and longevity of your KLUNSA LED Spotlight.

• پاکول:
  • Wipe the spotlight clean with a soft, dry cloth.
  • د کثافاتو پاکوونکي، محلولونه، یا سخت کیمیاوي مواد مه کاروئ، ځکه چې دا کولی شي پای یا بریښنایی اجزاو ته زیان ورسوي.
• د بیټرۍ بدلول:
  • When the light dims or stops functioning, it is time to replace the batteries.
  • Follow the "Battery Installation" steps in Section 4.1 to replace the AAA batteries.
  • د ځایی مقرراتو سره سم کارول شوي بیټرۍ تصفیه کړئ.
• ذخیره کول:
  • If storing the spotlight for an extended period, remove the batteries to prevent leakage.
  • په یخ، وچ ځای کې ذخیره کړئ.

7. ستونزه حل کول

If you encounter issues with your KLUNSA LED Spotlight, refer to the following common problems and solutions:

8. مشخصات

9. تضمین او ملاتړ

Ikea products are designed with quality and durability in mind. For information regarding warranty coverage, returns, or technical support, please refer to your purchase receipt or visit the official Ikea webستاسو د سیمې لپاره سایټ.

You can also contact Ikea customer service directly for assistance with product-related inquiries.

د Ikea رسمي Webسایټ: www.ikea.com