ډونر EC1118

Donner Revecho Reverb Delay Pedal EC1118 Instruction Manual

موډل: EC1118

1. محصول ختم شوview

The Donner Revecho is a versatile 2-in-1 guitar effect pedal, combining both reverb and delay effects. Designed for electric guitarists, it offers a compact solution for adding depth and ambiance to your sound. This pedal features independent controls for each effect, including a Tap Tempo function for precise delay synchronization and an Effect Tail feature for natural decay.

کلیدي ځانګړتیاوې:

  • 2-in-1 Pedal: Seamlessly integrates delay and reverb effects.
  • Instant Precision Control: Adjustable effect level, delay time, delay feedback, and reverberation time.
  • ټیمپو ټایپ کړئ: Provides instantaneous control over delay time for rhythm synchronization.
  • Effect Tail: Enhances playability by allowing notes and chords to decay naturally after disengagement.
  • تړون ډیزاین: User-friendly form factor with buffer bypass for tonal purity.
Donner Revecho Reverb Delay Pedal front view

شکل 1: مخکی view of the Donner Revecho Reverb Delay Pedal.

۴. د تنظیم لارښوونې

د بریښنا اړتیاوې:

The Donner Revecho pedal requires a 9V DC power adapter with a center-negative polarity and a minimum current of 100mA. This product does not come with a battery compartment. Using an improper power supply may cause the pedal to malfunction or result in damage.

د پیډل نښلول:

  1. خپل ګیتار سره وصل کړئ IN د معیاري ۱/۴ انچه وسیلې کیبل په کارولو سره د پیډل په ښي اړخ کې جیک.
  2. سره وصل کړئ بهر د پیډل په چپ اړخ کې جیک ستاسو ampد معیاري ۱/۴ انچه وسیلې کیبل په کارولو سره ستاسو د سیګنال زنځیر کې لایفیر یا بل پیډل.
  3. Connect the 9V DC power adapter to the 9V DC داخل جیک
Donner Revecho Reverb Delay Pedal angled view د ننوتلو او وتلو جیکونه ښودل

شکل ۳: زاویه لرونکی view showing the input (IN) and output (OUT) jacks, and the 9V DC power input.

3. عملیاتي لارښوونې

The Revecho pedal features five control knobs and two footswitches for comprehensive sound shaping.

کنټرولونه:

  • REVERB: Adjusts the overall level or intensity of the reverb effect.
  • مړینه: Controls the length of the reverb tail, from short to long.
  • کچه: د پیډل ټولیز محصول حجم تنظیموي.
  • فیډبیک: Determines the number of delay repeats. Higher settings result in more repeats.
  • ځنډ: Controls the delay time, from short slap-back echoes to long, atmospheric delays.

د پښو سویچونه:

  • REVERB HOLD (TAIL): Activates or deactivates the reverb effect. Holding this footswitch engages the Effect Tail feature, allowing the reverb to naturally decay even after the effect is disengaged.
  • DELAY HOLD (TAP): Activates or deactivates the delay effect. Tapping this footswitch multiple times sets the Tap Tempo for the delay time. Holding this footswitch will sustain the current delay repeats.
Donner Revecho Reverb Delay Pedal top view with labeled controls

شکل 3: پورته view of the pedal with control knobs and footswitches.

4. ساتنه

To ensure the longevity and optimal performance of your Donner Revecho pedal, follow these maintenance guidelines:

  • پاکول: د پیډل بهرنۍ برخه پاکولو لپاره نرم، وچ ټوکر وکاروئ. د کثافاتو پاکوونکو یا محلولونو کارولو څخه ډډه وکړئ، ځکه چې دوی ممکن پای ته زیان ورسوي.
  • ذخیره کول: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If not in use for an extended period, disconnect the power supply.
  • اړیکې: په دوره یي ډول د کیبل ټولې اړیکې د خرابوالي لپاره وګورئ. ډاډ ترلاسه کړئ چې جیکونه له دوړو او کثافاتو څخه پاک دي.

5. ستونزه حل کول

If you encounter issues with your Donner Revecho pedal, refer to the following common problems and solutions:

  • غږ نشته:
    • Ensure the power adapter is correctly connected and providing the specified 9V DC, center-negative power.
    • د سم اتصال او فعالیت لپاره ټول وسایل کیبلونه وګورئ.
    • Verify that the pedal is engaged (LEDs are lit) and the LEVEL knob is not set to minimum.
  • Weak or Distorted Signal:
    • Check the power supply; insufficient current (below 100mA) can cause performance issues.
    • ډاډ ترلاسه کړئ چې ټول کیبلونه په ښه حالت کې دي او په بشپړ ډول داخل شوي دي.
    • Adjust the LEVEL knob to an appropriate setting.
  • Delay/Reverb Not Functioning:
    • Confirm that the respective effect is engaged via its footswitch.
    • Check the REVERB, DECAY, FEEDBACK, and DELAY knobs to ensure they are not set to minimum or extreme settings that might make the effect imperceptible.

6. مشخصات

فیچرتفصیل
برانډډونر
د ماډل نومRevecho
د ماډل شمیرهEC1118
سټایلځنډ، تکرار
د محصول ابعاد۱۶.۵"لیتر x ۵۱.۲"لوی x ۱۶.۵"هونټ (۴۲ سانتي متره x ۱۳۰ سانتي متره x ۴۲ سانتي متره)
د توکي وزن0.3 کیلوګرامه
والیtage9 ولټه DC
Ampزمانه100 ملیونهamps (minimum)
د آډیو محصول اغیزېځنډ، تکرار
د کنټرول ډولKnob, Footswitch
د بریښنا سرچینهاډاپټر (شامل نه دی)
هډوتري برسیر1/4-inch Audio Jack
د سیګنال بڼهانلاګ
UPC747356962834

7. تضمین او ملاتړ

د تضمین معلومات:

This Donner product is covered by a 2 کلن تضمین د پیرود نیټې څخه. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

د پیرودونکي ملاتړ:

For further assistance, technical support, or warranty inquiries, please visit the official Donner webسایټ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د اړیکو معلومات معمولا د محصول په بسته بندۍ یا د تولید کونکي په پاڼه کې موندل کیدی شي webسایټ

© ۲۰۲۳ ډونر. ټول حقونه خوندي دي.