Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.

د خوندیتوب معلومات

خبرداری: دا محصول کولی شي تاسو ته د لیډ په شمول کیمیاوي موادو سره مخ کړي، کوم چې د کالیفورنیا ایالت ته پیژندل کیږي چې د سرطان او زیږون نیمګړتیاوې یا د زیږون نور زیان رسوي. د نورو معلوماتو لپاره لاړ شئ www.P65Warnings.ca.gov.

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.

د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• د بهرنۍ لیور اسمبلۍ
• د داخلي لیور اسمبلۍ
• Adjustable Latch (2-3/8" - 2-3/4" backset)
• Rounded Steel Faceplate
• اعتصاب پلیټ
• د سکرو نصب کول
• د لارښوونې لارښود

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.

تنظیم او نصب کول

This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview د نصبولو پروسه:

1. دروازه چمتو کړئ: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
2. لیچ تنظیم کړئ: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
3. بهرنۍ لیور نصب کړئ: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
4. د داخلي لیور نصب کول: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
5. د سټرایک پلیټ نصب کړئ: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
6. د ازموینې عملیات: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.

عملیاتي لارښوونې

To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.

ساتنه

To maintain the finish and functionality of your door lever, follow these guidelines:

• پاکول: لیور د نرم، ډ سره پاک کړئamp ټوکر. د کثافاتو پاکوونکو، محلولونو، یا سخت کیمیاوي موادو کارولو څخه ډډه وکړئ، ځکه چې دا کولی شي پای ته زیان ورسوي.
• غوړول: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
• ټینګول: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.

د ستونزو حل کول

مشخصات

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).

تضمین او ملاتړ

For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.