Amazon Basics Full Motion Articulating TV Wall Mount

پیژندنه

Thank you for choosing the Amazon Basics Full Motion Articulating TV Wall Mount. This product is designed to securely hold your 26-inch to 55-inch flat panel television, weighing up to 80 lbs (36.3 kg), providing flexible viewing angles and saving space. This manual provides essential information for safe installation, operation, and maintenance of your new TV wall mount.

د خوندیتوب مهم معلومات

خبرداری: Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Please read all instructions carefully before installation. If you have any questions, consult a qualified professional. Improper installation may result in serious injury or damage. Always ensure the mounting surface can safely support the combined weight of the mount and the TV.

For detailed safety guidelines, please refer to the official Safety Information PDF: د خوندیتوب معلومات (PDF)

د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او زیانمن شوي ندي.

This image displays all the primary components of the Amazon Basics Full Motion Articulating TV Wall Mount. It includes the main articulating arm assembly, the TV mounting plate, the wall plate, a small bubble level for installation, and a wrench for tightening bolts. These are the essential parts required for mounting your television.

• Full Motion Articulating TV Wall Mount Assembly
• د نصبولو هارډویر کټ (مختلف پیچونه، واشیرونه، فاصلې)
• د بلبل کچه
• د پورته کولو ټیټ
• د کارونکي لارښود (دا لاسوند)

مشخصات

This image highlights the versatile viewing options provided by the mount. It shows the mount's ability to extend up to 16.3 inches (41.4 cm) from the wall, accommodate 22-55 inch TVs weighing up to 80 pounds, and offers a tiltable range of 15 degrees (+10° to -5°) and a level correction range of 10 degrees left/right. This flexibility allows for optimal viewپه یوه خونه کې د مختلفو موقعیتونو څخه زاویې معلومول.

تنظیم او نصب کول

Before installation, ensure you have the necessary tools: a drill, stud finder (for wood studs), measuring tape, screwdriver, and a pencil. Always wear appropriate safety gear.

۳.۱. د نصبولو دمخه چک

Verify your TV's VESA pattern, size, and weight are within the mount's specifications. Confirm your wall type is suitable for installation.

This diagram illustrates the compatibility requirements for the TV mount. It shows supported VESA patterns (up to 400x400 mm), TV/monitor sizes (26-55 inches) and maximum load (80 lbs), and compatible wall types including single wood stud, solid concrete, and brick walls. It emphasizes that the mount should not be installed on drywall alone.

2. Attach Mounting Plate to TV

Identify your TV's VESA mounting pattern and select the appropriate screws (M4, M6, or M8) and spacers from the hardware kit. Attach the mounting plate (AP) to the back of your TV. Do not overtighten the screws.

This detailed diagram provides instructions for two critical setup steps. Step 2.1 guides users on how to identify their TV's VESA mounting pattern (W x H) and shows various common VESA configurations. Step 2.2 explains how to select the appropriate M4, M6, or M8 screw bolts for mounting the TV plate, with illustrations for both flat back and curved back televisions, ensuring a secure fit.

3. Mount Wall Plate to Wall

Using the provided mounting template and bubble level, mark the drill holes on your wall. Drill pilot holes according to your wall type (wood stud, concrete, or brick). Securely attach the wall plate to the wall using the appropriate anchors and screws. Ensure it is level and firmly attached.

۴. وروستۍ غونډه او سمون

With assistance, carefully lift the TV with the attached mounting plate and hook it onto the wall mount assembly. Secure the TV by tightening the two bolts at the lower back of the mount assembly. Adjust the tilt and swivel as desired.

This image illustrates the final stages of installation. Step 3.1 shows how to securely attach the mounting plate to the back of the TV, emphasizing not to overtighten. Step 3.2 details the process of mounting the TV onto the wall bracket, adjusting the tilt, and managing cables. It provides visual guidance for attaching the TV to the arm, adjusting the tilt angle, and routing cables for a clean installation.

This image shows the Amazon Basics TV wall mount in a typical living room environment, with a television extended from the wall. It demonstrates the mount's ability to position the TV for optimal viewing, complementing the room's decor.

د غره چلول

The full motion articulating design allows for versatile positioning of your television.

• تمدید: Gently pull or push the TV to extend or retract the arm. The mount can extend from 2.6 inches (6.6 cm) to 16.3 inches (41.4 cm) from the wall.
• ټیلټ: عمودی تنظیم کړئ viewing angle by tilting the TV up or down. The tilt range is from +10° (upward) to -5° (downward). Loosen the tilt adjustment bolts slightly, set the desired angle, and then re-tighten.
• تیر: Rotate the TV horizontally to achieve the perfect viewing angle from different seating positions. The mount allows for a 180° swivel.
• Level Correction: If the TV is slightly unlevel after installation, the mount allows for a small degree of level correction (up to 10° left/right).

Always move the TV smoothly and avoid sudden jerks. Do not exceed the maximum weight capacity or extension limits.

ساتنه

منظم ساتنه ستاسو د تلویزیون دیوال ماونټ اوږد عمر او خوندي عملیات تضمینوي.

• پاکول: Wipe the mount with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp ټوکر کارول کیدی شي، او بیا وچ شي. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ.
• وختي معاینات: په دوره یي ډول ټول پیچونه او بولټونه وګورئ ترڅو ډاډ ترلاسه شي چې دوی کلک او خوندي پاتې دي. د وخت په تیریدو سره، وایبریشن یا حرکت کولی شي د فاسټینرونو د خلاصیدو لامل شي.
• غوړول: د نښلولو بندونه د اسانه حرکت لپاره ډیزاین شوي او عموما غوړولو ته اړتیا نلري. که چیرې حرکت سخت شي، د پیرودونکو ملاتړ سره مشوره وکړئ.

د ستونزو حل کول

که تاسو د خپل تلویزیون دیوال ماونټ سره ستونزې سره مخ شئ، لاندې عام حلونو ته مراجعه وکړئ:

• تلویزیون په سطحه نه دی: Ensure the wall plate is perfectly level during installation. The mount also offers a small level correction range; adjust as needed. Re-check the tightness of all bolts.
• Mount feels unstable or wobbly: This is often due to improper installation. Verify that the mount is securely fastened to a solid wall structure (wood stud, concrete, or brick) and not just drywall. Ensure all bolts are tightened to the recommended torque. Re-check your TV's weight against the mount's capacity.
• د خښتو/څرخولو تنظیمولو کې ستونزه: Check if the adjustment bolts are too tight. Loosen them slightly to allow movement, then re-tighten once the desired position is achieved. Ensure no cables are obstructing movement.
• ورکې برخې: If any parts are missing from the package, do not proceed with installation. Contact Amazon Basics customer support immediately for assistance.

که چیرې د دې حل لارو هڅه کولو وروسته هم ستونزه دوام ومومي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

د تضمین معلومات

This Amazon Basics product is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Warranty Document:

تضمین (PDF)

د پیرودونکي ملاتړ

For further assistance, technical support, or inquiries regarding your Amazon Basics Full Motion Articulating TV Wall Mount, please visit the Amazon Basics support page or contact Amazon customer service directly through your purchase platform.

You can also refer to the User Guide (PDF) for additional details: د کارونکي لارښود (PDF)