د فیلیپس SRP2018/10 یونیورسل ریموټ کنټرول کارونکي لارښود

پیژندنه

The Philips SRP2018/10 is an 8-in-1 universal remote control designed to consolidate the control of multiple home entertainment devices into a single unit. This remote can operate various devices including televisions (TV, TV2), VCRs, Blu-ray players (BD), cable boxes (CBL), satellite receivers (SAT), streaming devices (STR), and auxiliary equipment (AUX). This manual provides instructions for setting up, operating, maintaining, and troubleshooting your universal remote control.

د بسته محتويات

Please check the package contents upon opening. The following items should be included:

• د فلپس SRP2018/10 یونیورسل ریموټ کنټرول
• د کارونکي لارښود (دا لاسوند)

که کوم توکي ورک یا زیانمن شوي وي، مهرباني وکړئ خپل پرچون پلورونکي یا د فیلیپس پیرودونکي ملاتړ سره اړیکه ونیسئ.

چمتو کول

1. د بیټرۍ نصب کول

ریموټ کنټرول دوه AAA بیټرۍ ته اړتیا لري (شامل ندي).

1. د ریموټ کنټرول شاته د بیټرۍ کمپارټ پوښ خلاص کړئ.
2. دوه AAA بیټرۍ دننه کړئ، ډاډ ترلاسه کړئ چې مثبت (+) او منفي (-) ټرمینلونه د خونې دننه د نښانونو سره په سمه توګه سمون لري.
3. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

انځور: زاویه لرونکی view of the Philips SRP2018/10 remote control, illustrating its ergonomic design and the location of the battery compartment on the rear.

2. د وسایلو پروګرام کول

To control your devices, the remote must be programmed with the correct device codes. A comprehensive code list is typically provided with the remote or available on the Philips support webسایټ دا عمومي ګامونه تعقیب کړئ:

1. هغه وسیله چالان کړئ چې تاسو یې پروګرام کول غواړئ (د مثال په توګه، ستاسو تلویزیون).
2. Press and hold the desired device button on the remote (e.g., TV, CBL, BD) until the indicator light on the remote illuminates and stays lit.
3. Enter the 3 or 4-digit code for your device's brand from the code list. The indicator light should turn off after the last digit is entered.
4. ریموټ خپل وسیله ته وښایاست او فشار ورکړئ ځواک button. If the device turns off, the code is correct.
5. If the device does not respond, repeat the process with the next code listed for your brand.
6. Once a working code is found, test other functions like volume, channel, and menu to ensure full compatibility.

Note: Some devices may require trying multiple codes to find the best match. If no codes work, consult the Philips support website for an updated code list or alternative programming methods.

د ریموټ کنټرول چلول

After successful programming, you can use the remote to control your devices. The remote features dedicated buttons for various functions.

انځور: مخکینۍ برخه view of the Philips SRP2018/10 universal remote control, displaying the full layout of its buttons for various functions and device selection.

۱. د وسیلې انتخاب

د یو ځانګړي وسیلې کنټرول لپاره، د ریموټ په سر کې د اړونده وسیلې تڼۍ فشار ورکړئ:

• TV: For your primary television.
• تلویزیون-2: For a secondary television.
• VCR: For a video cassette recorder.
• BD: For a Blu-ray player.
• CBL: For a cable television box.
• SAT: For a satellite receiver.
• STR: For a streaming device.
• AUX: For an auxiliary device.

Once a device button is pressed, the remote will send commands to that specific device until another device button is selected.

2. بنسټیز کارونه

• Power (⑁): ټاکل شوی وسیله چالان یا بندوي.
• داخلول: ستاسو په تلویزیون کې د ویډیو ان پټ سرچینو له لارې تیریږي.
• Vol + / Vol -: Adjusts the volume of the selected audio device (usually TV).
• Ch + / Ch -: Changes channels on the selected tuner device (TV, CBL, SAT).
• خاموش: غږ خاموشوي.
• لارښود: Accesses the electronic program guide.
• مینو: Opens the device's on-screen menu.
• OK / Arrow Buttons: د مینو له لارې نیویګیټ کوي او انتخابونه تاییدوي.
• شاته: Returns to the previous menu or screen.
• معلومات: د اوسني پروګرام یا ان پټ په اړه معلومات ښیې.
• د شمېرې تڼۍ (0-9): Direct channel entry.
• د پلې بیک کنټرولونه: Play (▶), Pause (⏸), Stop (■), Rewind (⏪), Fast Forward (⏩), Record (●).

ساتنه

1. پاکول

د ریموټ ظاهري بڼه او فعالیت ساتلو لپاره:

• ریموټ کنټرول د نرم، وچ ټوکر سره پاک کړئ.
• د کثافاتو پاکوونکي، موم، یا محلول مه کاروئ.
• Avoid getting liquids inside the remote.

2. د بیټرۍ بدلول

Replace the batteries when the remote's indicator light becomes dim or the remote stops responding consistently. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries or different types of batteries.

د ستونزو حل کول

If you encounter issues with your Philips SRP2018/10 universal remote control, try the following solutions:

• Remote not working at all:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace the batteries with fresh AAA batteries.
  • Ensure there is a clear line of sight between the remote and the device.
• وسیله امرونو ته ځواب نه ورکوي:
  • Ensure you have selected the correct device button (e.g., TV ستاسو د تلویزیون لپاره).
  • Re-program the device using a different code from the code list.
  • ډاډ ترلاسه کړئ چې وسیله فعاله ده.
• Only some buttons work for a device:
  • This indicates that the programmed code is partially compatible. Try programming the device again with a different code from the code list to find a more complete match.
• Indicator light does not illuminate during programming:
  • The batteries may be low or incorrectly inserted. Replace them.

If these steps do not resolve the issue, please refer to the Philips support webد نورو مرستو لپاره سایټ یا د پیرودونکو خدماتو سره اړیکه ونیسئ.

مشخصات

تضمین او ملاتړ

Philips products are designed and manufactured to the highest standards. For detailed warranty information, product registration, and technical support, please visit the official Philips support website. You can typically find FAQs, updated code lists, and contact information for customer service there.

مهرباني وکړئ د تضمین ادعاګانو لپاره د پیرود ثبوت وساتئ.