HyperX Savage DDR4 Memory Module User Manual

پیژندنه

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

انځور: مخکینۍ برخه view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

د بسته محتويات

ډاډ ترلاسه کړئ چې ستاسو کڅوړه لاندې توکي لري:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

تنظیم او نصب کول

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. تیاری

1. د مطابقت چک: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. بندول: خپل کمپیوټر په بشپړه توګه بند کړئ او د بریښنا کیبل یې قطع کړئ.
3. خلاصه قضیه: Open your computer's side panel to access the motherboard.

2. د ماډل نصب کول

1. د DIMM سلاټونه ومومئ: په خپل مور بورډ کې د DDR4 DIMM سلاټونه وپیژنئ. د دوه ګوني چینل حافظې لپاره د سم سلاټ ترتیب لپاره خپل د مور بورډ لارښود وګورئ.
2. کلیپونه خلاص کړئ: Gently push down the retention clips at both ends of the DIMM slot.
3. ماډل سم کړئ: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. ماډل داخل کړئ: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. تکرار کړئ: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

انځور: زاویه لرونکی view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. د نصبولو وروسته

1. قضیه بنده کړئ: د خپل کمپیوټر کیس اړخ پینل بیا وصل کړئ.
2. بریښنا بیا وصل کړئ: د بریښنا کیبل بیرته خپل کمپیوټر ته ولګوئ او چالان یې کړئ.

عملیاتي لارښوونې

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) پروfiles. دا پروfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. BIOS/UEFI ته لاسرسی: During system startup, repeatedly press the designated key (commonly DEL, F2, F10، یا F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. د XMP ترتیب ومومئ: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. پرو فعال کړئfile: د XMP پرو غوره کړئfile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. خوندي کول او وتل: بدلونونه خوندي کړئ او د BIOS/UEFI څخه ووځئ. ستاسو سیسټم به د نوي حافظې ترتیباتو پلي کولو سره بیا پیل شي.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

ساتنه

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• پاک ساتل: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• سمه درملنه: کله چې د حافظې ماډلونه اداره کوئ، تل یې د څنډو سره ونیسئ ترڅو د سرو زرو اړیکو یا مدغم سرکټونو سره د تماس څخه مخنیوی وشي.
• د تودوخې کنټرول: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

د ستونزو حل کول

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• سیسټم نه بوټ کیږي:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • د احتمالي نیمګړتیا لرونکي ماډل پیژندلو لپاره یوازې د یو نصب شوي ماډل سره بوټ کولو هڅه وکړئ.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile فعال دی.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• د سیسټم بې ثباتي یا خرابي:
  • د غلطیو د چک کولو لپاره د حافظې تشخیصي وسیله (د مثال په توګه، د وینډوز حافظې تشخیصي یا MemTest86) چل کړئ.
  • ډاډ ترلاسه کړئ چې ستاسو د بریښنا رسولو واحد (PSU) ټولو برخو ته کافي او باثباته بریښنا چمتو کوي.
  • Check for proper cooling within your system to prevent overheating.

مشخصات

تضمین او ملاتړ

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د تضمین تصدیق لپاره د پیرود ثبوت وساتئ.

HyperX Support: www.hyperx.com/support