GODOX EZA-N3

Godox EZA-N3 Digital Timer Shutter Remote Controller

د کارن لارښود

پیژندنه

The Godox EZA-N3 Digital Timer Shutter Remote Controller is designed to provide precise control over your camera's shutter functions, enabling advanced photographic techniques such as time-lapse, long exposures, and continuous shooting. This remote offers programmable delay, exposure time, interval time, and shot count, enhancing your creative possibilities.

کلیدي ځانګړتیاوې

  • Programmable delay, exposure time, interval time, and number of shots.
  • Supports manual shutter release with half-press for focus.
  • Timing precision to 1 second.
  • Time settings from 1 second up to 99 hours, 59 minutes, 59 seconds.
  • Large, illuminated LCD panel for operation in low-light conditions.
  • Designed for group shots, macro photography, long exposures, and continuous shooting.
Godox EZA-N3 Digital Timer Shutter Remote Controller

Image: The Godox EZA-N3 Digital Timer Shutter Remote Controller with its connecting cable.

Parts of the Remote

Familiarize yourself with the components of your EZA-N3 remote controller:

Labeled diagram of Godox EZA-N3 remote controller parts

Image: Diagram illustrating the various parts and controls of the Godox EZA-N3 remote.

  1. Battery-channel cover: د بیټرۍ نصبولو لپاره د لاسرسي نقطه.
  2. تار Connects the remote to the camera.
  3. Focus and Release Indicator Light: Two-color LED indicating focus (half-press) and shutter release (full-press).
  4. د ښودنې پینل: LCD screen showing timer settings and status.
  5. Timer Start/Stop Button: Initiates or halts timer functions.
  6. د SET تtonۍ: Used to confirm settings and enter parameter adjustment modes.
  7. Light/Lock Button: Activates the display backlight or locks the remote's controls.
  8. د تیر تڼۍ (پورته/ښکته/کیڼ/ښي): Navigates menus and adjusts numerical values.
  9. د شټر خوشې کولو تڼۍ: Manually triggers the camera shutter.

چمتو کول

د بیټرۍ نصب کول

  1. Locate the battery-channel cover on the back of the remote.
  2. Slide or open the cover to access the battery compartment.
  3. دوه AAA بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ (+/-).
  4. د بیټرۍ پوښ په خوندي ډول وتړئ.

د کیمرې سره نښلول

  1. Ensure your camera is powered off before connecting the remote.
  2. Locate the remote control terminal on your Nikon camera.
  3. Connect the EZA-N3's cable connector firmly into the camera's remote terminal.
  4. The remote is compatible with Nikon models including D2H, D2Hs, D1x, D1h, D1, D2x, D2Xs, D200, D300, D3, D3x, and E5120A.
Close-up of the Godox EZA-N3 remote's camera connector

انځور: نږدې انځور view of the remote controller's cable connector, designed for compatible Nikon cameras.

د ریموټ چلول

د شټر اساسي خوشې کول

  • نیمه پریس: Press the Shutter Release Button halfway down to activate your camera's autofocus and metering system. The focus indicator light will illuminate.
  • بشپړ مطبوعات: Press the Shutter Release Button fully down to trigger the camera's shutter. The release indicator light will illuminate.

Timer Functions Overview

The EZA-N3 offers four primary timer settings, displayed on the LCD:

  • ځنډ: Self-timer function, setting a delay before the first shot.
  • اوږد: Controls the exposure duration for BULB mode.
  • INTVL (Interval): Sets the time between consecutive shots in a series.
  • N (Number): د اخیستل شویو شاټونو ټولټال شمیر مشخص کوي.

Setting Timer Parameters

  1. فشار ورکړئ SET button to cycle through the DELAY, LONG, INTVL, and N parameters. The currently selected parameter will blink.
  2. د کارولو د تیر تڼۍ (Up/Down/Left/Right) to adjust the hours, minutes, and seconds for the blinking parameter.
  3. مطبوعاتي SET again to confirm the value and move to the next parameter, or to exit the setting mode.
  4. Once all desired parameters are set, press the د ټیمر د پیل / بندولو تڼۍ to begin the timed sequence.

Delay / Self-Timer (DELAY)

Sets the initial delay before the first exposure. Useful for avoiding camera shake or allowing time to get into a shot. Adjustable from 1 second to 99 hours, 59 minutes, 59 seconds.

Long Exposure (BULB)

Determines the duration of the shutter opening for long exposure photography. This function is active when your camera is set to BULB mode. Adjustable from 1 second to 99 hours, 59 minutes, 59 seconds.

Interval Timer (INTVL)

Sets the time gap between each consecutive exposure in a series. This is crucial for time-lapse photography. Adjustable from 1 second to 99 hours, 59 minutes, 59 seconds.

Number of Shots (N)

Specifies how many photos the remote will take in a timed sequence. Can be set from 1 to 399, or to infinite (indicated by '--').

ښودنه او کنټرولونه

د LCD شاته رڼا

فشار ورکړئ Light/Lock Button briefly to activate the LCD backlight. The backlight will remain on for approximately 6 seconds, aiding visibility in dark environments.

د لاک فنکشن

فشار ورکړئ او ونیسئ Light/Lock Button for a few seconds to lock the remote's controls. This prevents accidental changes to settings during a timed sequence or while carrying the remote. Repeat the action to unlock.

د ستونزو حل کول

  • Remote does not power on: Check if batteries are inserted correctly and have sufficient charge. Replace with fresh AAA batteries if necessary.
  • Camera does not respond to shutter release: Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible mode (e.g., single shot, continuous, or BULB). Check if the remote's controls are locked.
  • Timer sequence does not start: Confirm that all timer parameters (DELAY, LONG, INTVL, N) are set correctly and not at '0' if a value is required. Ensure the Timer Start/Stop button was pressed.
  • LCD display is dim or flickering: This may indicate low battery power. Replace the AAA batteries.

مشخصات

  • ماډل: Godox EZA-N3
  • د ټایمر دندې: Delay, Long Exposure (BULB), Interval, Number of Shots
  • د ټایمر سلسله: له 1 ثانیې څخه تر 99 ساعتونو ، 59 دقیقو ، 59 ثانیو پورې
  • Exposure Count: 1 to 399, or unlimited
  • ښکاره کول: LCD with 6-second backlight
  • د شټر خوشې کول: دوه-سtage button (half-press for focus, full-press for release)
  • د کیبل اوږدوالی: تقریبا 80 سانتي متره
  • د بریښنا سرچینه: 2 x AAA بیټرۍ (شامل ندي)
  • Compatible Nikon Models: D2H, D2Hs, D1x, D1h, D1, D2x, D2Xs, D200, D300, D3, D3x, E5120A

ساتنه

  • پاکول: Use a soft, dry cloth to clean the remote. Avoid using liquid cleaners or solvents.
  • ذخیره کول: ریموټ په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ.
  • د بیټرۍ پاملرنه: که چیرې ریموټ د اوږدې مودې لپاره ونه کارول شي نو د لیکیدو مخنیوي لپاره بیټرۍ لرې کړئ.
  • د کیبل پاملرنه: Avoid sharp bends or excessive pulling on the connecting cable to prevent damage.

تضمین او ملاتړ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.