د هاچ 9531200 پاکټ پرو ټیټ رینج TDS ټیسټر کارونکي لارښود

پیژندنه

The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.

په بکس کې څه دي

• Hach Pocket Pro Low Range TDS Tester
• 4 AAA بیټرۍ
• لاینارډ
• د کیلیبریشن حل
• د چټک پیل لارښود

کلیدي ځانګړتیاوې

• Confidence in results
• وخت او پیسې خوندي کړئ
• د کارولو اسانتیا

چمتو کول

د بیټرۍ نصب کول

1. د ټیسټر په شا کې د بیټرۍ د برخې پوښ ومومئ.
2. پوښ لرې کړئ.
3. Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
4. د بیټرۍ کمپارټ پوښ په خوندي ډول بدل کړئ.

ابتدايي محاسبه

For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.

عملیاتي لارښوونې

بریښنا کول / بند کول

Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.

اندازه کول

1. ډاډ ترلاسه کړئ چې ټیسټر د کارولو دمخه پاک او وچ دی.
2. Immerse the probe end of the tester into the sampد حل لاره، ډاډ ترلاسه کول چې سینسر په بشپړ ډول ډوب شوی دی.
3. Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
4. Record the measurement as needed.
5. Rinse the probe with distilled water after each measurement to prevent cross-contamination.

د ښودلو پوهه

The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.

ساتنه

د تفتیش پاکول

Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.

د بیټرۍ بدلول

When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.

ذخیره کول

Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.

د ستونزو حل کول

ناسم لوستل

• Ensure the probe is clean and free of debris.
• Perform a calibration using fresh calibration solution.
• Check for air bubbles around the probe during measurement.
• s تایید کړئample temperature is within the operating range.

د ښودلو/بریښنا ستونزې نشته

• وګورئ چې بیټرۍ په سمه توګه نصب شوي او کافي چارج لري. که اړتیا وي نو بدل یې کړئ.
• ډاډ ترلاسه کړئ چې د بیټرۍ کمپارټ پوښ په خوندي ډول تړل شوی.

ورو غبرګون وخت

• پروب په ښه توګه پاک کړئ.
• Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.

مشخصات

تضمین او ملاتړ

Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach webسایټ

For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.