NETGEAR ProSAFE GS108PE Gigabit PoE+ Switch User Manual

1. پیژندنه

The NETGEAR ProSAFE GS108PE is an 8-port Gigabit Web Managed (Plus) PoE Switch designed to optimize business network performance. It provides essential networking features such as VLAN, Quality of Service (QoS), IGMP Snooping, Link Aggregation (LAG), rate limiting, and traffic monitoring. Four of its ports offer Power over Ethernet (PoE) with a total budget of 45W, capable of powering compatible devices like IP phones, IP surveillance cameras, and wireless access points through a single Ethernet cable.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ستاسو کڅوړه لاندې توکي لري:

• NETGEAR ProSAFE GS108PE 8-Port Gigabit Web Managed (Plus) PoE Switch
• د بریښنا اډاپټر
• ایترنیټ کیبل
• Wall-Mount Kit (if applicable)
• د نصبولو لارښود

۲.۲. فزیکي ځانګړتیاوې

3.1 مخکښ پینل

انځور: مخکی view of the NETGEAR ProSAFE GS108PE switch. This image displays the eight Gigabit Ethernet ports (ports 1-4 are PoE enabled), the Power LED, and individual Link/Activity and PoE status LEDs for each port. A 'Factory Defaults' button is also visible on the right side.

• د بریښنا LED: د ځواک حالت په ګوته کوي.
• بندرونه ۱-۵: Gigabit Ethernet ports.
• PoE بندرونه (1-4): These ports provide Power over Ethernet for compatible devices.
• لینک / فعالیت LEDs: Indicate network connection and data activity for each port.
• PoE LEDs (1-4): Indicate PoE status for ports 1-4.
• Factory Defaults Button: Used to restore the switch to its factory default settings.

3.2 شاته پینل

انځور: شاته view of the NETGEAR ProSAFE GS108PE switch. This image shows the power input jack for connecting the power adapter and a Kensington lock slot for physical security.

• د بریښنا ننوتل: دلته ورکړل شوی بریښنا اډاپټر وصل کړئ.
• د کینسنګټن لاک سلاټ: For physical security of the device.

4. ترتیب کول

Follow these steps to set up your NETGEAR ProSAFE GS108PE switch:

1. د بریښنا پیوستون: Connect the power adapter to the switch's power input and then plug it into an electrical outlet. The Power LED on the front panel should illuminate.
2. د شبکې وسیلې اتصال: Connect your network devices (computers, servers, network printers, etc.) to any of the 8 Gigabit Ethernet ports using standard Ethernet cables.
3. د PoE وسیلې اتصال: For devices that support Power over Ethernet (e.g., IP cameras, VoIP phones, wireless access points), connect them to ports 1-4. The switch will automatically detect and provide power to compatible PoE devices. Ensure the total power consumption of all connected PoE devices does not exceed the switch's 45W PoE budget.
4. ابتدايي ترتیب: For advanced features like VLAN, QoS, and traffic monitoring, use the NETGEAR Plus Utility software or a web browser to access the switch's management interface. Refer to the included Installation Guide for detailed instructions on accessing the management interface.

5. عملیاتي لارښوونې

Understanding the LED indicators is crucial for monitoring the switch's operation:

• د بریښنا LED:
  • کلک شنه: سویچ پرمخ وړل کیږي او په نورمال ډول کار کوي.
  • بند: سویچ بریښنا نه ترلاسه کوي.
• لینک/فعالیت LEDs (په هر پورټ کې):
  • کلک شنه: A device is connected, and the link is active.
  • شنه چمکۍ: معلومات په بندر کې لیږدول یا ترلاسه کیږي.
  • بند: No device is connected or the link is down.
• PoE LEDs (ports 1-4):
  • کلک شنه: PoE power is being supplied to the connected device.
  • شنه چمکۍ: PoE power is being supplied, and there might be a power fault or overcurrent condition.
  • بند: No PoE device is connected, or the connected device does not require PoE.

For managing advanced features such as VLANs, QoS, and port mirroring, access the switch's web-based management interface or use the NETGEAR Plus Utility. These tools allow you to configure network settings to optimize performance and security.

6. ساتنه

To ensure optimal performance and longevity of your NETGEAR ProSAFE GS108PE switch, consider the following maintenance tips:

• پاک ساتل: Regularly clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
• د وینټیلیشن ډاډ ترلاسه کړئ: Place the switch in a well-ventilated area to prevent overheating. Do not block the ventilation slots.
• د فرم ویئر تازه معلومات: په دوره یي ډول د NETGEAR ملاتړ وګورئ website for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and fix potential issues.
• د چاپیریال شرایط: Operate the switch within its specified temperature and humidity ranges to prevent damage.

7. ستونزه حل کول

که تاسو د خپل سویچ سره ستونزې سره مخ شئ، نو لاندې عام ستونزې حل کولو مرحلو ته مراجعه وکړئ:

• ځواک نشته:
  • ډاډ ترلاسه کړئ چې د بریښنا اډاپټر په خوندي ډول د سویچ او کار کونکي بریښنایی آوټ لیټ دواړو سره وصل دی.
  • د بل وسیلې په لګولو سره د بریښنا آوټ لیټ فعال دی تصدیق کړئ.
• په پورټ کې هیڅ لینک نشته:
  • Check that the Ethernet cable is securely connected at both ends (switch and device).
  • یو بل ایترنیټ کیبل هڅه وکړئ.
  • ډاډ ترلاسه کړئ چې وصل شوی وسیله فعاله ده او په سمه توګه کار کوي.
  • په سویچ کې د بل پورټ سره ازموینه وکړئ.
• د PoE وسیله بریښنا نه ترلاسه کوي:
  • Ensure the device is connected to one of the PoE-enabled ports (1-4).
  • Verify the device is PoE compatible (802.3af standard).
  • Check the PoE LED for the port. If flashing, there might be a power issue.
  • Ensure the total power consumption of all PoE devices does not exceed the 45W budget. Disconnect non-essential PoE devices to test.
• د شبکې د فعالیت مسلې:
  • د ډیر شبکې ترافیک یا لوپونو لپاره وګورئ.
  • ډاډ ترلاسه کړئ چې ټول کیبلونه په ښه حالت کې دي او په سمه توګه وصل دي.
  • If using advanced features, review your VLAN, QoS, or rate limiting configurations through the management utility.
• د مدیریت انٹرفیس ته لاسرسی نشي کیدی:
  • ډاډ ترلاسه کړئ چې ستاسو کمپیوټر د سویچ په څیر د شبکې په ورته برخه کې دی.
  • Verify the switch's IP address and your computer's network settings.
  • If all else fails, perform a factory reset using the 'Factory Defaults' button (refer to Section 3.1). Note that this will erase all custom configurations.

8. مشخصات

9. تضمین او ملاتړ

NETGEAR provides comprehensive support for the ProSAFE GS108PE switch:

• د ژوندانه تضمین: This product is covered by a limited lifetime hardware warranty.
• LIFETIME Next Business Day Replacement: In case of a hardware failure, a replacement unit can be shipped the next business day.
• LIFETIME 24/7 Advanced Tech Support: Access to technical assistance via chat for the lifetime of the product.

For detailed warranty terms, product registration, and to access support resources, please visit the official NETGEAR support webسایټ: www.netgear.com/support