Alcatel-Lucent OmniSwitch OS6850-24 User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the Alcatel-Lucent OmniSwitch OS6850-24. The OS6850-24 is a 24-port Layer 3+ gigabit copper-port switch, including 4 combo copper/SFP ports, designed for robust network deployments. It operates on the Alcatel-Lucent Operating System (AOS), facilitating efficient network upgrades and deployments. This switch supports native IPv4 and IPv6 switching, converged triple-play traffic, and advanced Quality of Service (QoS) features, ensuring investment protection and high performance.

2. Product Features

• 24 Port stackable gigabit switch with 4 combo copper/SFP ports and 2 10Gig stacking ports.
• Layer 3+ manageability with advanced QoS features and native IP4/IP6 switching.
• Supports converged data, voice, and video network traffic.
• Easily configurable and modular power supplies (comes with 126 single AC power).
• Management via Omniview client, Web interface, or Command Line Interface (CLI).

3. Setup and Installation

3.1 Unpacking and Inspection

Carefully unpack the OmniSwitch OS6850-24 and inspect it for any signs of damage during transit. Ensure all components listed in the packing slip are present. If any items are missing or damaged, contact your vendor immediately.

3.2 Physical Installation

The OmniSwitch OS6850-24 is designed for rack mounting. Ensure adequate ventilation around the unit to prevent overheating. Connect the AC power supply to the switch and a suitable power outlet. Use appropriate Ethernet cables for network connections.

Figure 3.2.1: Front view of the Alcatel-Lucent OmniSwitch OS6850-24, showing the overall chassis and mounting brackets.

Figure 3.2.2: Close-up of the front panel of the OmniSwitch OS6850-24, detailing the 24 gigabit Ethernet ports, including the 4 combo copper/SFP ports.

Figure 3.2.3: Rear view of the OmniSwitch OS6850-24, showing the modular power supply bay, cooling fans, and console port.

3.3 Initial Configuration

Upon initial power-up, the switch will perform a self-test. For first-time configuration, connect a console cable to the switch's console port and use a terminal emulator. Alternatively, once an IP address is assigned, the switch can be managed via its web interface or the Omniview client. Refer to the Alcatel-Lucent documentation for detailed configuration steps for specific network environments.

4. Operating Instructions

The OmniSwitch OS6850-24 is a highly capable network device. Its operation involves managing network traffic, configuring VLANs, implementing QoS policies, and ensuring network security. All operational aspects are controlled through the Alcatel-Lucent Operating System (AOS) via the CLI, web interface, or Omniview client.

4.1 Network Connectivity

Connect network devices (servers, workstations, other switches) to the gigabit Ethernet ports. For fiber optic connections, use compatible SFP transceivers in the combo ports. The switch automatically detects link status and speed.

4.2 Advanced Features

Leverage the Layer 3+ capabilities for advanced routing protocols. Configure QoS to prioritize critical traffic like voice and video. Utilize IPv4 and IPv6 support for modern network architectures. Refer to the comprehensive AOS documentation for detailed guides on these advanced configurations.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your OmniSwitch OS6850-24.

• Firmware Updates: Periodically check the Alcatel-Lucent support website for the latest firmware versions. Applying updates can improve performance, add new features, and address security vulnerabilities.
• Environmental Control: Ensure the operating environment remains within specified temperature and humidity ranges. Keep the area around the switch clear to allow for proper airflow.
• Cleaning: Gently clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners. Ensure ventilation openings are free from dust accumulation.
• Cable Management: Maintain organized cabling to prevent accidental disconnections and improve airflow.

6. Troubleshooting

This section provides basic troubleshooting steps for common issues.

• No Power:
  • Verify the power cable is securely connected to both the switch and the power outlet.
  • Check the power outlet for functionality.
  • Ensure the power supply unit is correctly seated in its bay.
• No Link Light:
  • Ensure the Ethernet cable is properly connected at both ends.
  • Try a different Ethernet cable.
  • Verify the connected device is powered on and functioning correctly.
  • Check port configuration on the switch (e.g., port enabled, speed/duplex settings).
• Network Connectivity Issues:
  • Verify IP address configuration on the switch and connected devices.
  • Check VLAN configurations if applicable.
  • Ensure routing tables are correct for Layer 3 operations.
  • Temporarily disable any firewall rules that might be blocking traffic.

For more complex issues, consult the detailed troubleshooting guides available in the Alcatel-Lucent OmniSwitch OS6850 documentation or contact technical support.

7. Specifications

8. Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your product or visit the official Alcatel-Lucent website. For technical support, documentation, and software downloads, please visit the Alcatel-Lucent support portal or contact their authorized service partners. Ensure you have your product model number (OS6850-24-US) and serial number ready when contacting support.