Leviton PJ26-E 1-Gang Decora/GFCI Wallplate Instruction Manual

1. پیژندنه

This manual provides instructions for the installation, operation, and maintenance of the Leviton PJ26-E 1-Gang Decora/GFCI Wallplate. This wallplate is designed to cover a single Decora or GFCI device, offering a clean and finished appearance. Its midway size provides additional wall coverage, which can help conceal minor wall surface irregularities.

Image 1.1: Leviton PJ26-E 1-Gang Decora/GFCI Wallplate in Black. This image shows the front view of the wallplate, designed to accommodate one Decora-style electrical device or GFCI outlet.

کلیدي ځانګړتیاوې:

• 1-Gang Configuration: Designed for a single electrical device.
• Midway Size: Provides slightly larger coverage than standard wallplates, ideal for concealing wall imperfections.
• Thermoplastic Nylon Construction: Ensures durability and resistance to impact, abrasion, fading, and discoloration.
• سوداګریزه درجه: Built for robust performance and longevity.
• رنګ: Black finish for a sleek aesthetic.

2. د خوندیتوب معلومات

خبرداری: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring. Always use caution when working with electrical components.

• ډاډ ترلاسه کړئ چې ټول بریښنایی کارونه د وړ بریښنایی متخصص لخوا یا د ځایی بریښنایی کوډونو سره سم ترسره کیږي.
• Do not install if the wallplate or device appears damaged.
• دا محصول یوازې د داخلي کارونې لپاره دی.
• له ماشومانو لرې وساتئ.

3. د بسته محتويات

• 1 x Leviton PJ26-E 1-Gang Decora/GFCI Wallplate (Black)
• Mounting Screws (matching color)

4. مشخصات

5. نصب کول

Follow these steps to properly install your Leviton wallplate:

1. د بریښنا بندول: Locate the circuit breaker or fuse box that controls the power to the outlet or switch you are working on. Turn off the power completely. Verify the power is off using a voltage ټیسټر.
2. زوړ وال پلیټ لرې کړئ: Carefully unscrew and remove the existing wallplate from the electrical device.
3. د نوي دیوال پلیټ موقعیت: Place the Leviton PJ26-E wallplate over the electrical device, aligning the screw holes.
4. خوندي دیوال پلیټ: Insert the provided mounting screws into the wallplate holes and gently tighten them until the wallplate is snug against the wall. Do not overtighten, as this can crack the wallplate.
5. د بریښنا بیرته راګرځول: Once the wallplate is securely installed, return to the circuit breaker or fuse box and turn the power back on.

6. عملیات

The Leviton PJ26-E wallplate is a passive component designed to cover and protect electrical devices. Once installed, no further operational steps are required. It provides a finished look and helps prevent accidental contact with wiring behind the device.

7. ساتنه

• پاکول: To clean the wallplate, use a soft, damp ټوکر. د کثافاتو پاکوونکو، محلولونو، یا سخت کیمیاوي موادو څخه ډډه وکړئ، ځکه چې دا کولی شي پای ته زیان ورسوي.
• معاینه: Periodically check the wallplate for any signs of damage, cracks, or discoloration. If damage is observed, replace the wallplate to maintain safety and appearance.
• کلکوالی: Ensure the mounting screws remain tight. If the wallplate becomes loose, gently retighten the screws.

8. ستونزه حل کول

• Wallplate does not fit: Ensure you have the correct size and configuration (1-gang Decora/GFCI) for your electrical device.
• Wallplate appears loose: Gently tighten the mounting screws. If the problem persists, check if the electrical device itself is securely mounted to the electrical box.
• Wallplate is damaged: If the wallplate is cracked or broken, it should be replaced immediately to ensure safety and aesthetics.

9. تضمین او ملاتړ

This Leviton product comes with a standard warranty. For specific warranty details, claims, or technical support, please refer to the official Leviton website or contact Leviton customer service directly. Keep your purchase receipt as proof of purchase.

د لیویټون پیرودونکي خدمت: د نورو مرستو لپاره، مهرباني وکړئ لیدنه وکړئ www.leviton.com یا د دوی د ملاتړ کرښې سره اړیکه ونیسئ.