Leviton 1222-2W

Leviton 1222-2W Double-Pole AC Quiet Switch Instruction Manual

موډل: 1222-2W

1. محصول ختم شوview

The Leviton 1222-2W is a 20 Amp, 120/277 Volt, Toggle Double-Pole AC Quiet Switch designed for extra heavy-duty applications. This industrial-grade switch features a self-grounding design and supports both back and side wiring for flexible installation. It is built with high-quality materials to ensure durability and reliable performance.

کلیدي ځانګړتیاوې:

  • صنعتي کیفیت: Constructed for demanding environments.
  • Heavy Gauge Copper Alloy Arm: Ensures top performance and longevity.
  • Large Silver Cadmium-Oxide Contacts: Designed for long life, preventing sticking, welding, and excessive pitting.
  • Fully Enclosed Switch Mechanism: Housed in a rugged enclosure for strength, track, and arc resistance.
  • Wire Lead Switches: Facilitates fast and easy installation.
مخکی view of the Leviton 1222-2W Double-Pole AC Quiet Switch

شکل 1: مخکی view of the Leviton 1222-2W Double-Pole AC Quiet Switch. Shows the white toggle and the metal mounting strap.

2. د خوندیتوب معلومات

خبرداری: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring! This device must be installed in accordance with all national and local electrical codes.

  • Always disconnect power at the service panel before working on any electrical circuit.
  • د مناسب شخصي محافظتي تجهیزاتو (PPE) څخه کار واخلئ لکه د خوندیتوب عینکې او موصل شوي دستکشې.
  • که تاسو د دې لارښوونو د کومې برخې په اړه ډاډه نه یاست ، د بریښنایی تکنالوژی څخه مشوره وکړئ.
  • Do not use this switch with loads exceeding its specified ratings (20 Amps, 120/277 Volts AC).
  • دا محصول هغه کیمیاوي مواد لري چې د کالیفورنیا ایالت ته پیژندل شوي چې د سرطان او زیږون نیمګړتیاوې یا د زیږون نور زیانونه رامینځته کوي (وړاندیز 65 خبرداری). د لاس وهلو وروسته لاسونه ومینځئ.

3. مشخصات

برانډلیویتون
د ماډل شمیره1222-2W
د سویچ ډولToggle, Double-Pole
اوسنۍ درجه بندي20 Amps
والیtage درجه بندي۱۲۰/۲۴۰ ولټه AC
د عملیاتو حالتآن - بند
د پوستونو شمیر2
د تارونو ډولBack and Side Wired
ځمکني کولSelf Grounding
موادMetal (Mounting Strap), Silver Alloy (Contacts)
رنګسپین
تصدیقونهCSA, FCC, RoHS, TUV, cUL

۱. تنظیم او نصب کول

Follow these steps carefully to install your Leviton 1222-2W Double-Pole AC Quiet Switch. Ensure all safety precautions are observed.

اړین وسایل:

  • سکریو ډرایور (فیلپس او فلیټ هیډ)
  • د تار پټونکي/کټرونه
  • والیtage ټیسټر
  • بریښنایی ټیپ (اختیاري)

د نصبولو مرحلې:

  1. د بریښنا بندول: Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Use a voltage tester to confirm that the power is completely off at the switch box.
  2. زوړ سویچ لرې کړئ (که چیرې تطبیق شي): Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch, noting their positions.
  3. تارونه چمتو کړئ: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wire ends are clean and straight.
  4. د ترمینلونو پیژندنه: The Leviton 1222-2W switch has four terminals for line and load connections, plus a green grounding screw. For a double-pole switch, there will be two 'LINE' terminals (for incoming power) and two 'LOAD' terminals (for outgoing power to the device). The switch is marked 'LINE' and 'LOAD' on the back.
  5. شاته view of the Leviton 1222-2W Double-Pole AC Quiet Switch showing LINE and LOAD terminals

    شکل 2: شاته view of the switch, indicating 'LINE' and 'LOAD' terminals for wiring connections. Note the green grounding screw at the bottom.

  6. د ځمکني تار سره نښلول: Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw on the switch. Tighten securely.
  7. د کرښې تارونه وصل کړئ: Connect the two incoming hot (usually black) wires from the power source to the two 'LINE' terminals on the switch. You can use either the side screw terminals or the back-wire holes. Tighten screws firmly if using side terminals.
  8. د بار تارونه وصل کړئ: Connect the two outgoing hot (usually black) wires leading to the fixture or appliance to the two 'LOAD' terminals on the switch. Tighten screws firmly.
  9. اړخ view of the Leviton 1222-2W Double-Pole AC Quiet Switch with toggle in ON position

    شکل ۳: د اړخ پروfile of the switch, showing the depth and the toggle in the 'ON' position. This view highlights the robust construction.

  10. سویچ نصب کړئ: Carefully fold the wires into the electrical box, leaving enough room for the switch. Secure the switch to the electrical box using the provided mounting screws.
  11. وال پلیټ نصب کړئ: Attach the wall plate over the switch.
  12. د بریښنا بیرته راګرځول: Turn the power back ON at the circuit breaker or fuse box. Test the switch to ensure proper operation.

5. عملیات

The Leviton 1222-2W is a simple ON-OFF toggle switch. To operate:

  • د فعالولو لپاره: Push the toggle lever to the 'ON' position (typically upwards).
  • د بندولو لپاره: Push the toggle lever to the 'OFF' position (typically downwards).
اړخ view of the Leviton 1222-2W Double-Pole AC Quiet Switch with toggle in OFF position

شکل ۳: د اړخ پروfile of the switch, showing the depth and the toggle in the 'OFF' position. This view highlights the robust construction.

6. ساتنه

The Leviton 1222-2W switch is designed for long-term, maintenance-free operation under normal conditions. However, periodic checks can help ensure continued safety and performance:

  • پاکول: د سویچ او دیوال پلیټ پاکولو لپاره، د نرم، d سره مسح کړئamp ټوکر. د کثافاتو پاکوونکي یا محلولونه مه کاروئ. ډاډ ترلاسه کړئ چې د پاکولو دمخه بریښنا بنده ده.
  • معاینه: Periodically inspect the switch and wall plate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and replace the switch.
  • کلکوالی: If the switch feels loose in the wall box, turn off power and gently tighten the mounting screws. Do not overtighten.

7. ستونزه حل کول

If you experience issues with your Leviton 1222-2W switch, refer to the following common problems and solutions:

ستونزهاحتمالي لاملد حل لاره
Switch does not turn ON/OFF power.No power to the circuit; Loose wiring connection; Faulty switch.Check circuit breaker/fuse. Turn off power, check all wire connections for tightness. If connections are secure, replace the switch.
سویچ د لمس کولو لپاره ګرم احساس کوي.Overload on the circuit; Loose wiring connection; Internal fault.Immediately turn off power. Reduce load on the circuit. Check wiring connections for tightness. If problem persists, replace the switch.
Toggle is stiff or difficult to move.Dust or debris; Internal mechanism issue.Turn off power and gently clean around the toggle. If stiffness continues, replace the switch.

If troubleshooting steps do not resolve the issue, contact Leviton customer support or a qualified electrician.

8. تضمین او ملاتړ

د تضمین معلومات:

This Leviton 1222-2W Double-Pole AC Quiet Switch is covered by a 10 کلن محدود تضمین. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details, please refer to the official Leviton warranty statement or contact customer support.

د پیرودونکي ملاتړ:

For technical assistance, product inquiries, or warranty claims, please contact Leviton customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (1222-2W) and purchase date available.

© 2026 Leviton Manufacturing Co., Inc. ټول حقونه خوندي دي.