Rane RS-1 Power Supply Instruction Manual

1. پیژندنه

The Rane RS-1 is a dedicated external power supply designed to provide reliable 120VAC power to a range of compatible Rane audio products. This manual provides essential information for the safe and correct setup, operation, and maintenance of your RS-1 power supply.

Please read this manual thoroughly before using the product to ensure proper function and to prevent damage to the unit or connected equipment.

2. د خوندیتوب معلومات

د بریښنا سرچینه: Connect the RS-1 only to a 120VAC, 60Hz power outlet. Ensure the outlet is properly grounded.
وینټیلیشن: Do not block any ventilation openings. Ensure adequate airflow around the power supply.
رطوبت: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the power supply.
تودوخه: د تودوخې سرچینو لکه ریډیټرونو، د تودوخې راجسترونو، بخاریو، یا نورو تودوخې تولیدونکو وسایلو ته نږدې د واحد له ځای پرځای کولو څخه ډډه وکړئ.
کیبلونه: د بریښنا تار د چلولو یا پنچ کیدو څخه خوندي کړئ، په ځانګړې توګه په پلګونو، د اسانتیاو استخراج، او هغه ځای چې دوی د وسایلو څخه وځي.
خدمت کول: د دې محصول پخپله خدمت کولو هڅه مه کوئ. ټول خدمتونه وړ خدماتي پرسونل ته راجع کړئ.
قطع کول: Unplug the power supply from the wall outlet during lightning storms or when unused for long periods.

3. ترتیب کول

Follow these steps to correctly set up your Rane RS-1 Power Supply:

د مطابقت وړ وسیله وپیژنئ: Ensure your Rane audio product requires the RS-1 power supply and has the appropriate RJ-45 style power input port.
وسیله سره وصل کړئ: Carefully insert the RJ-45 style connector from the RS-1 power supply into the designated power input port on your Rane audio device. Ensure a secure connection.
د بریښنا آوټ لیټ سره وصل کړئ: Plug the two-prong AC power cord of the RS-1 into a standard 120VAC, 60Hz wall outlet.
پاور آن: Once connected, your Rane audio device should receive power. Refer to your Rane audio device's manual for specific power-on procedures.

Rane RS-1 Power Supply unit with AC plug and RJ-45 style connector

Image: Rane RS-1 Power Supply. This image displays the Rane RS-1 Power Supply, a black rectangular unit with an attached power cord featuring a two-prong North American plug on one end and an RJ-45 style connector on the other, designed to provide power to compatible Rane audio equipment.

4. عملیاتي لارښوونې

The Rane RS-1 is an external power supply that operates automatically once connected to a power source and a compatible Rane device. It does not have user-adjustable controls.

Ensure all connections are firm before applying power.
The power supply is designed for continuous operation within its specified voltage او واټtage حدود.
Always disconnect the power supply from the wall outlet before disconnecting it from the Rane audio device, especially if the device does not have its own power switch.

5. ساتنه

The Rane RS-1 Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity:

پاکول: Disconnect the power supply from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
معاینه: Periodically inspect the power cord and connectors for any signs of damage, fraying, or loose connections. If damage is observed, discontinue use and seek professional servicing.
ذخیره کول: کله چې د اوږدې مودې لپاره نه کارول کیږي، د بریښنا رسولو په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سخت تودوخې څخه لرې.

6. ستونزه حل کول

If you encounter issues with your Rane RS-1 Power Supply, refer to the following common troubleshooting steps:

ستونزه	احتمالي لامل	د حل لاره
No power to connected Rane device.	Power supply not plugged into wall outlet. د دیوال آوټ لیټ فعال نه دی. RJ-45 style connector not fully inserted into Rane device. Faulty power supply or cable.	Ensure the power supply is securely plugged into a live wall outlet. د دیوال ساکټ د بل وسیلې سره ازموینه وکړئ. Verify the RJ-45 style connector is firmly seated in the Rane device's power input. If issues persist, contact Rane support for assistance.
Intermittent power.	Loose connection at wall outlet or device. Damaged power cord or connector.	د ټینګښت لپاره ټول اړیکې چیک کړئ. Inspect the power cord and connectors for damage. Replace if necessary.

If these steps do not resolve the issue, contact Rane customer support or a qualified service technician.

7. مشخصات

ماډل	RS1
برانډ	راني
ننوتۍ جلدtage	120 وولټ AC
د بریښنا سرچینه	AC
واټtage	۴۵ واټه
د بریښنا پلګ ډول	ډول A - ۲ پنونه (شمالي امریکا)
د توکي وزن	1.3 پونډه (0.59 kg)
ابعاد	(په معلوماتو کې مشخص شوي نه دي)
UPC	687499101045
ASIN	B0002IU02S

8. Compatible Rane Devices

The Rane RS-1 Power Supply is compatible with the following Rane audio products:

AC 22B
AC 23B
AD 22d
AP 13
AVA 22d
CP 52
CP 64
DA 216a
DA 26
DC 24
DMS 22
جی ای 130
جی ای 215
جی ای 30
HC4
HC6
MLM 42
MLM 82a
MM 8z
MPNNUMX
MP 22z
MP 24z
MPNNUMX
MS 1b
PE 17
PS 1
RA 30
SM 26B
ایس ایم 82
SRM 66
SSE 35
THX 22
THX 44
TTM 54i
TTM 56
VP 12

9. تضمین او ملاتړ

For information regarding warranty coverage, product registration, or technical support, please refer to the official Rane website or contact Rane customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Rane Official Webسایټ: www.rane.com

Rane RS1