ProtoArc EK01-NL Ergonomic Keyboard
Product Features
Press FN and “Direction Keys”to realize PgUP PgDn Home End.
Single Press “Direction Keys”to realize direction key function.
2.4GHz Connection Steps
- Switch the keyboard power ON.
- Take out the USB receiver.
- Plug the USB receiver into the USB port of the computer.
- Press
key to switch to 2.4G channel, the white indicator will flash slowly, the keyboard now is in 2.4G mode.
Bluetooth Connection Steps
- Switch the power ON.
- Press the channel key to choose a bluetooth channel
/ 
when the indicator light flashes slowly, keyboard is in the corresponding channel.
- Hold and press the channel key for 3 to 5 seconds, the white indicator will flash quickly, the keyboard now enters bluetooth pairing mode.
Windows 10 OS - Open “Settings” and Click Bluetooth Devices.
- Choose “Add / Delete Bluetooth Devices”.
- Search for “ProtoArc EK01-NL” and click “Pair”.
- Pairing is complete when it shows “ProtoArc EK01-NL Connected”.
Mac OS
Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.
Find “System Preferences” on Mac.
Turn on “Bluetooth” in System Preferences, search for “ProtoArc EK01-NL”.
Click “Pair”, then wait until it shows “connected” for pairing to complete .
iOS
Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.
Open “Settings” and turn on Bluetooth.
Choose “ProtoArc EK01-NL” from the list and click “Pair”.
Pairing is complete when ii shows “ProtoArc EK01-NL Connected”.
Android System
Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.
Open “Settings” and turn on Bluetooth.
Bluetooth search and click to pair the “ProtoArc EK01-NL”.
Pairing is complete when it shows “ProtoArc EK01-NL Connected”.
How to Switch Device Channels
After are connected, press the corresponding channel key to switch between devices.
Bluetooth 1 Device Channel
Keyboard Charging
When battery is low, the power indicator light will start to flash until the keyboard turns off. Please recharge as soon as possible to ensure best user experience.
Low battery may cause poor connection quality, resulting delays or other problems while using.
The power indicator light is red while charging and will turn green when fully charged. One full charge cycle takes about 2-3 hours.
| Buttons | Windows | Android | iOS | MAC OS |
 | Decrease brightness | Decrease brightness | Decrease brightness | Decrease brightness |
| Increase brightness | Increase brightness | Increase brightness | Increase brightness |
 | Window switching | Window switching | / | Multi-window preview |
 | Multi-window preview | / | App switching | App switching |
 | Show desktop | / | / | Show desktop |
 | Search | Search | Search | Search |
 | Select all | Select all | Select all | Select all |
 | Copy | Copy | Copy | Copy |
 | Cut | Cut | Cut | Cut |
 | Paste | Paste | Paste | Paste |
 | Mute | Mute | Mute | Mute |
 | Home | Home | Home | / |
 | Screenshot | Screenshot | Screenshot | Screenshot |
 | Lock | / | Lock | Lock |
 | Volume up | Volume up | Volume up | Volume up |
 | Volume down | Volume down | Volume down | Volume down |
 | Previous | Previous | Previous | Previous |
 | Play & Stop | Play & Stop | Play & Stop | Play & Stop |
 | Next | Next | Next | Next |
 | press FN+ESC to turn ON / OFF the FN function | |||
NOTE: The FN function is for alternate commands (F1-F12 & multimedia functions are dual-use keys).
Product Specification
| Compatible Operating Systems | 2.4G: Windows System Bluetooth: Windows 8, Windows 10 or above, Mac OS X 10.12 or above, Android 4.3 or above. |
| Battery Capacity | 300mAh |
| Sleep Time | Enter into the sleep mode after no operation of 30 minutes |
| Battery Life | 1000 times charge and discharge |
| Key Life | 3 Millions Strokes |
| Standby Time | 200 Hours |
| Wake Up Way | Press any key |
| Operating Distance | 8 m / 26 ft |
| Working Current | 53mA |
| Keyboard Dimension | 423.8 x 231.4 x 27.7mm / 16.7″ x 9.1″ x 1.1″ |
Tips
- If keyboard fails to connect, switch the keyboard power OFF then turn it back ON, retry the Bluetooth connection procedures again. Clear the current Bluetooth connection list, remove current devices and then reconnect.
- To switch to a already connected channel, please wait for 3 seconds after pressing the switch device button for it to respond.
- The keyboard has memory function, when a keyboard channel is successfully connected, that channel connection will remain connected in the default channel. The corresponding indicator light will be on.
Sleep Mode
- When the keyboard stays idle for more than 30 minutes, it will automatically enter sleep mode and the indicator light will be off.
- To wake the keyboard simply press any key on the keyboard and it will be ready within 3 seconds. The indicator light will turn on again.
What’s In Package
- 1 x Wireless Bluetooth Keyboard
- 1 x USB Receiver
- 1 x Type-C Charging Cable
- 1 x User Manual
Customer Support
support@protoarc.com
www.protoarc.com
Documents / Resources
 | ProtoArc EK01-NL Ergonomic Keyboard [pdf] User Manual EK01-NL Ergonomic Keyboard, EK01-NL, Ergonomic Keyboard, Keyboard |
