ProtoArc EK01 Backlit Wireless Ergonomic Keyboard 

Product Features

Keyboard Backlit Switch:
The first press turns on the backlight dimly;
The second press, brightens to medium brightness;
The third press, turns the light to its brightest;
The fourth press, turns off the backlit.
The keyboard will enter deep sleep mode after 30 minutes without operation, the backlight will be turned off automatically, you can press any key to wake the keyboard.
Note: the backlight needs to be turned on again.

2.4G Connection

1. Turn on the power switch to ON.
   
2. Get the USB receiver read
   
3. Plug the USB receiver into USB port of your computer.
   
4. Press to switch to 2.4G channel, when the white indicator light flashes slowly, 2.4G channel is connected.
   

Bluetooth Connection

1. Turn the power switch ON
   
2. Short press the corresponding Bluetooth chann , the white indicator light will flash once on the corresponding channel.
   
3. Hold and press the Bluetooth channel button for 3 to 5 seconds, when the white indicator light starts flashing quickly, it enters Bluetooth pairing mode.
   

Windows 10 OS

❹ Click “Bluetooth Devices”.

❺ Click “Add or Remove Bluetooth Devices”.

❻ Your computer will automatically search for “ProtoArc EK01” then click “pair”.

❼ “ProtoArc EK01 ” is now connected

Mac OS

Please complete the Bluetooth connection step G)0@ before pairing.

❹ Click “System Preferences” on Mac

❹ Click “Bluetooth” in “System Preferences”

❻ Your computer will automatically find “ProtoArc EK01 “, then click “pair”, it will be ready for use after installation.

iOS

Please complete the Bluetooth connection step G)@® before pairing.

❹ Click “Setting” on the device and then turn ON Bluetooth.

❺ Your computer will automatically find “ProtoArc EK01 “, then click “pair” to complete pairing.

❻ “ProtoArc EK01 ” is connected.

Android OS

Please complete the Bluetooth connection step CD@® before pairing.

❹ Click “Setting” on the device and then turn on Bluetooth.

❺ Your computer will automatically find “ProtoArc EK01 “, then click “pair” to complete pairing.

❻ “ProtoArc EK01” is connected.

How to Switch Device Channels

  After pairing/connection, simply press the channel button to switch to the corresponding device.

Keyboard Charging

When the battery is low, the white indicator light on the button of the channel in use will start to flash until the device shuts down. Please charge the keyboard as soon as possible to ensure it has sufficient power for stable connection.
If the battery is too low, it may cause poor connection quality, resulting in delays or other problems while using. Charge in time to avoid these problems. Power indicator light is red while charging, and will turn green when fully charged. A full charging cycle is about 2 to 3
hours.

Multimedia Function Button

Buttons	Windows	Android	iOS	MAC OS
	Decrease brightness	Decrease brightness	Decrease brightness	Decrease brightness
	Increase brightness	I ncrease brightness	I ncrease brightness	I ncrease brightness
	Window switching	Window switching	I	Multi-window preview
	Multi-window preview	I	App switching	App switching
	Show desktop	I	I	Show desktop
	Search	Search	Search	Search
	Select all	Select all	Select all	Select all
	Copy	Copy	Copy	Copy
	Cut	Cut	Cut	Cut
	Paste	Paste	Paste	Paste
	Mute	Mute	Mute	Mute
	Home	Home	Home	I
	Screenshot	Screenshot	Screenshot	Screenshot
	Lock	I	L ock	Lock
	Volume up	Volume up	Volume up	Volume up
	Volume down	Volume down	Volume down	Volume down
	Previous	Previous	Previous	Previous
	Play&Stop	Play&Stop	Play&Stop	Play&Stop
	Next	Next	Next	Next
	press FN+ESC to turn ON / OFF the FN function

Product Specification

Tips

1. If keyboard fails to connect, switch the keyboard power OFF then turn it back ON, retry the Bluetooth connection procedures again. Clear the current Bluetooth connection list, remove current devices and then reconnect.
2. To switch to a already connected channel, please wait for 3 seconds after pressing the switch device button for it to respond.
3. The keyboard has memory function, when a keyboard channel is successfully connected, that channel connection will remain connected in the default channel.
   The corresponding indicator light will be on.

Sleep Mode

1. When the keyboard stays idle for more than 30 minutes, it will automatically enter sleep mode and the indicator light will be off.
2. To wake the keyboard, simply press any key on the keyboard and it will be ready within 3 seconds. The indicator light will turn on again.

What’s In Package

• 1 * Wireless Bluetooth Keyboard
• 1 * USS Receiver
• 1 * Type-C Charging Cable
• 1 * User Manual

Customer Support

support@protoarc.com
www.protoarc.com

Documents / Resources

	ProtoArc EK01 Backlit Wireless Ergonomic Keyboard [pdf] User Manual EK01 Backlit Wireless Ergonomic Keyboard, EK01, Backlit Wireless Ergonomic Keyboard, Wireless Ergonomic Keyboard, Ergonomic Keyboard
	ProtoArc EK01 Backlit Wireless Ergonomic Keyboard [pdf] User Manual EK01 Backlit Wireless Ergonomic Keyboard, EK01, Backlit Wireless Ergonomic Keyboard, Ergonomic Keyboard

References

• User Manual