Protech-LOGO

Protech QC3193 Digital Microscope with 4.3 Display

Protech-QC3193-Digital-Microscope-with-4-3-Display-PRODUCT

MAIN PARAMETERS

  • Pixel: HD 3.6 megapixels
  • Display screen: 4.3” HD LCD Display
  • Magnification: 1-600X continuous amplification system
  • Distance between objects: 15 mm to infinity (depending on the different distances)
  • With a built-in lithium battery, available for working more than 6 hours continuously
  • The high-capacity lithium battery needs about 4 hours to be fully charged. When it is being charged, the display will showProtech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (1). When it is fully charged it will showProtech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (2)

INTELLIGENT UNIVERSAL SUPPORT

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (3)

The intelligent universal support is super light and powerful, and can be absorbed on the surface of glass, ceramic, marble, plastic board and others.

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (4)

The silicone suction cup will not leave marks on any surface, after long-term usage. It can be cleaned with water when there’s dust on the surface.

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (5)

The closest distance between the microscope and the goal is 15mm, the magnifying time is the maximum, and the magnifying time will be smaller as the distance increases.

BUTTON LAYOUT

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (6)

Function Setting Key

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (7)

  • Resolution: 1080p, 720p, VGA
  • Date Tag: Displayed / Not Displayed
  • Motion Detection: On / Off (When it’s on it will start to record a video automatically, as soon as detecting movement.)
  • Cyclic Record: Off / 3 mins / 5 mins / 10 mins. As soon as the memory card is full, it will delete the first video and save the new video automatically.
  • Exposure Value: +2.0 (0) -2.0
  • Format: Yes / No
  • Auto Shutdown: Off / 1 min / 3 mins
  • Auto Sleep: Off / 1 / 3 / 5 Mins
  • Factory Reset: Yes / No
  • Light Source’s Frequency: 50 / 60Hz
  • Time Setting: Year, Month, Day, Hours, Minutes, Seconds
  • Image Rotating: On / Off
  • Light: On / Off
  • Software Version: V1.10

Mode ButtonProtech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (8)

  • Recording Video Mode
  • Taking Photos Mode: 5M, 2M, 1.3M,
  • VGA, Press the OK button to take photos
  • Playback Mode: Delete, Lock / Unlock

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (9)

Left, Right and OK Button

  • OK: Photo / Video, Open Key

Power On / OffProtech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (10)

  • Press it once to turn it on, and press it again to turn it off.

FEATURES

Protech-QC3193-Digital-Microscope-with-4-3-Display-FIG-1 (11)

  1. Power DC Interface (5P Mini)
  2. Memory Card Socket (microSD): 1-64GB
  3. Brightness Adjust Button
  4. Reset Button: Restore the system. If the unit stops working, press the button with a sharp object to restart it.
  5. Fast loading 4 holes bayonet, push the bracket 4 claws into the bayonet hearing a click, assembly is complete.
  6. High brightness 8 LEDs, available for up to 100,000 hours

CONTACT

  • Distributed by:
    • Electus Distribution Pty Ltd
    • 46 Eastern Creek Dr,
    • Eastern Creek NSW 2766 Australia
    • Ph 1300 738 555
    • Int’l +61 2 8832 3200
    • Fax 1300 738 500
    • www.electusdistribution.com.au.

Documents / Resources

Protech QC3193 Digital Microscope with 4.3 Display [pdf] User Manual
QC3193 Digital Microscope with 4.3 Display, QC3193, Digital Microscope with 4.3 Display, Microscope with 4.3 Display, 4.3 Display, Display

References

Leave a comment

Your email address will not be published. Required fields are marked *