DS18-LOGO

DS18 BTC-FIVE Bluetooth 5.3 Audio Receiver

DS18-BTC-FIVE-Bluetooth-53-Audio-Receiver- PRODUCT

FEATURES

  • Universal Wireless BLUETOOTH® Audio Receiver
  •  Latest BLUETOOTH® 5.3 Version
  • Higher Sound Quality and Faster Data Transfer
  • Longer Range up to 130ft*
  • IP66 Water-Resistant Rating for All Elements
  • 3.3V Stereo RCA Pre-Output.
  •  Remote Output to TURN ON external amplifiers
  • Internal Fuse (not in-line) for easy installation
  • Not For Submersible Use
  • Great For Cars, Trucks, ATVs, UTV’s, 4x4s, Boats, Marine Watercrafts, & PowerSport Vehicles
  • Compatible with Both iOS and Android Platforms

DS18-BTC-FIVE-Bluetooth-53-Audio-Receiver- (2)

GREAT FOR: CARS, JEEPS, BOAT, POWERSPORT & MORE

INSTALATION

DS18-BTC-FIVE-Bluetooth-53-Audio-Receiver- (3)

  • RCA (Black): Left Channel Output.
  • RCA (Red): Right Channel Output.
  •  GND (Black): Connect to the Negative Input of the Power Supply.
  • REM OUT (Blue): Connect to the Amplifier remote Input.
  • ACC (Orange): Connect to Ignition Signal Input.
  • 12V (Red): Connect to the Positive Input of the Power Supply.

BLUETOOTH® PAIRING / CONNECTION

Activate the BTC-FIVE by turn the ACC system on:

  •  Search for the BTC-FIVE from your BT-enabled device.
  • The BT Device’s Preassigned Name will appear as “BTC-FIVE” (No password is required for connecting).
  • When connected, the remote output should be activate and the system is ready to stream audio.
  • To turn off the system you will need to un-pair de BT device or disconnect the ACC input to turn off the BTC-FIVE.

AUTO RECONNECTION: 

  • When the device is out of range, the BT device disconnects automatically.
  • The BT will automatically reconnect when detected in range.
  • When the device is turned off from the ACC the BT device disconnects automatically.
  • When the device is turned back on from the ACC the BT device will automatically reconnect.

SPECIFICATIONS

  • Frequency Response ……………………… 20Hz-20KHz
  • Signal to Noise Ratio ………………………………………… 96dB
  • T.H.D……………………………………………………………………………………………… 0.467%
  • Channel Separation ……………. dB …………………… 60dB
  • Voltage Operation ………………………………… 8-15V
  • Fuse Size ……………………………………………………………… 1A
  • Waterproof Rating ……………………………………………… IP66
  • RCA Line Out (Pre-Amp) …………….. 3.3v
  • Remote Out ………………………………………………………. Yes / Si
  • Body Material / Color / Finish / …………………………………….PC Black / PC Negro

BT SPECIFICATIONS 

  • Version …………………………………………………………………………………. 5.3
  • Services  ……………………….. Audio Streaming
  • Audio Protocols ………………………………………………..A2DP
  • Audio Codec Supported……………………………….. SBC
  • Sample Rate  ………………………………………….. 44.1Khz
  • Bitrate……………………………………………………… 192-320Kb/s
  • Bitrate Depth  ……………………………………………… 16bits
  • Range…………………………………………………………………… >130ft / >40m

MEASUREMENTS :

  • Overall Length …………………………………………… 2.85″ / 72.5mm
  • Overall Width …………………………………………………. 3.15″ / 80mm
  • Overall Height ……………………………………………………1″ / 26.8mm

MEASUREMENTS

DS18-BTC-FIVE-Bluetooth-53-Audio-Receiver- (4)

DS18-BTC-FIVE-Bluetooth-53-Audio-Receiver- (1)FCC

FCC ID: 2AYOQ-BTC-FIVE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this product not authorized by DS18 could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

WARRANTY

Please visit our website DS18.com for more information on our warranty policy.
We reserve the right to change products and specifications at any time without notice. Images mav or may not included optional equipment.

FOR MORE INFORMATION

PLEASE VISIT
DS18.COM
To maintain compliance with FCC’S RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator our body: Use only the supplied antenna.

Frequently Asked Questions

What is the range of the BTC-FIVE?

The range is 130 ft.

Is the BTC-FIVE water-resistant?

Yes, it has an IP66 water-resistant rating.

How do I activate the BTC-FIVE?

Follow the steps outlined in the user manual to activate the device via Bluetooth.

Can I use the BTC-FIVE with an amplifier?

Yes, you can connect an amplifier to the BTC-FIVE for enhanced audio output.

What should I do if my Bluetooth device disconnects?

The device will automatically reconnect when back in range or when reactivated from the ACC power source.

Documents / Resources

DS18 BTC-FIVE Bluetooth 5.3 Audio Receiver [pdf] Owner's Manual
408BTCFIVE, DS 18 BTC-FIVE, BTC-FIVE Bluetooth 5.3 Audio Receiver, BTC-FIVE, Bluetooth 5.3 Audio Receiver, 5.3 Audio Receiver, Audio Receiver, Receiver

References

Leave a comment

Your email address will not be published. Required fields are marked *