3-Way Leveller (LV-3WAY-01)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE GEAR!
BE HIGHLY VIGILANT WHILE PLACING
The Leveller must be carefully locked while setting up on any equipment.
DO NOT FORGET TO SECURE THE EQUIPMENT
The gear must be cautiously protected while mounting on the leveler.
NEVER LEAVE THE KNOBS LOOSE
Always tighten the locking knobs properly for giving additional security to the camera setup.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE OPERATION.
YOUR ADDITIONAL INFORMATION, TECHNICAL IS AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.
3-Way Leveller Setup
Assemble Mitchell Base
- Remove the Castle Ring from the bottom of the Leveller and mount it on a Mitchell Tripod Stand (Not Included), as shown in the image.
- Then tighten back the castle ring by twisting and using a castle nut wrench.
- You can also tighten the castle ring with the provided locking screw.
- The 3 anti-slip leveling knobs provide a tilt angle of up to 20°. Loosen any of the knobs to offer steep 20° adjustment.
Assembling as Euro Base
- Using an Allen key, loosen the bolts of the castle ring from the bottom of the leveler and remove it.
- Now attach the euro adapter to the leveler and tighten bolts properly using an Allen key.
- The leveler is ready to be mounted on any Euro-base Bazooka (Not Included).
PROAIM 3-WAY LEVELLER – MITCHELL / EURO BASE ALL DRESSED UP AND READY TO GO!
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please contact us immediately and we promise our utmost support and care until you use our product.
Documents / Resources
 | PROAIM LV-3WAY-01 3-Way Leveller [pdf] Instruction Manual LV-3WAY-01, 3-Way Leveller |
