ProDVX Stainless Steel housing 10X/SLB Series
Mount the backplate
The back-plate can be mounted on the wall through the four holes on the outside.
In addition, the cover can be placed on a floor/table-stand with the VESA holes.
* Fixing materials are not included
Mount the frontplate
Connect the cabling to the display and test the display.
Then press the front plate over the screen and screw the four M3x10 bolts into the four holes at the top and bottom of the screen.
* Cabels are not included
Documents / Resources
|PRO DVX 8080960 Stainless Steel Housing 10X/SLB Series [pdf] Installation Guide|
8080960 Stainless Steel Housing 10X SLB Series, 8080960 Stainless Steel Housing 10X, Stainless Steel Housing 10X, 8080960 Housing 10X SLB Series, Housing 10X SLB Series