SCT013G

SCT013G Split Core Current Transformer

Characteristic:
Safety lock buckle, easy installation, cable output

Technical index:
Mounting type: Free hanging (In-Line)
Material of core: Ferrite
Applicable standards: GB20840-2014
Operating temperature: -25℃ ~ +70℃
Storage temperature: -30℃ ~ +90℃
Frequency range: 50Hz-1KHz
Dielectric strength: Input (bare conductor)/Output AC 3.5KV/1min 50Hz
Output/Housing AC 3.5KV/1min 50Hz
Electrical parameters:The following parameters are typical values. The actual values shall be subject to the actual measurement of the product
Product picture printing is for reference only, subject to the actual product

	SCT013 -005	SCT013 -010	SCT013 -015	SCT013 -020	SCT013 -025	SCT013 -030	SCT013 -050	SCT013 -060	SCT013 -100		Secification of cable: 2 x 0.2mm² two core shielded cable Length of cable:100cm~105cmVoltage output type The secondary is not allowed to short circuits
Rated input	5A	10A	15A	20A	25A	30A	50A	60A	100A	A
Rated output	1									V
Accuracy	1									%
Weight	50g									g

Rated input	5A	10A	15A	20A	25A	30A	50A	60A	100A	A	Secification of cable: 2 x 0.2mm² two core shielded cable Length of cable:100cm~105cmVoltage output type The secondary is not allowed to short circuits
Rated output	0.333									V
Accuracy	1									%
Weight	50g									g

SCT013-000			Secification of cable: 2 x 0.2mm² two core shielded cable Length of cable:100cm~105cm TVS: Transient Voltage Suppressor (7.5V) Current output type The secondary is not allowed to open circuit
Rated input	100A	A
Rated output	50	mA
Turns ratio	1:2000	–
Sampling resistance	10	Ω
Accuracy	1	%
Weight	50g	g

Dimensions(in mm±0.5) :

www.poweruc.pl

Documents / Resources

PowerUC SCT013G Split Core Current Transformer [pdf] Owner's Manual SCT013G Split Core Current Transformer, SCT013G, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer

References

• User Manual