PortKeys BM5 Touch Screen Monitor User Manual

BM5
User Manual

SHENZHEN PORTKEYS ELECTRONIC TECHNOLOGY CO., LTD

Product Appearance Size

Operating temperature range: 0 ℃ ~ 40 ℃

Standard Accessories

BM5 Monitor X1
Camera Control Cable X1
Warm Prompt Card X1
Safety Box×1
Power Cord (Aviation
Head – D-TAP) X1
Power Cord (Aviation
Head – DC) X1
U Disk（Manual，3D LUTs，
Firmware Inside） X1

Parameter

Size	5.2″
Dimension	142x83x37.75mm
Viewing Angle	178°H/178°V
Brightness(nit)	2200
Resolution	1920×1080
Contrast Ratio	1000:1
Weight	350g
Color	8bit
Backlight	WED
Material	Aluminum Alloy + Toughened Glass
Input Voltage	DC 7~24V
Power Consumption	9.5~16W
Signal Input	3G SDI、HDMI
Signal Output	3G SDI
Headphone	Output
Menu Language	English
Power Input / Output	4pin Aviation Connector
Signal Conversion	HDMI into SDI OUT
Camera Control Interface	Focus Puller / CAMERA REMOTE
Support Battery Model	SONY NP-F970/F960/F750/F550
Upgrade Firmware / Load LUT	USB-A
Fan	Yes

Supported input resolution and frame rate
HDMI Signal

1920×1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz
1920×1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
1920×1080i@50Hz,59.94Hz,60Hz
1280×720p@50Hz,59.94Hz,60Hz
720×576p&720×576i@50Hz
720×480p&720×480i@50Hz,59.94Hz,60Hz

Supported input/output resolution and frame rate
SDI Signal
1920×1080p@50fps,59.94fps,60fps
1920×1080p@50Hz,59.94Hz,60Hz YUV422
1920×1080p@23.98Hz,24Hz,25Hz,29.94Hz,30Hz YUV444/YUV422/RGB444
1920×1080psf@23.98Hz,24Hz,25Hz,29.97Hz,30Hz YUV444/YUV422/RGB444
1920×1080i@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
1280×720p@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
720×480i@59.94Hz YUV422
720×576i@50Hz YUV422

Page switching settings

[System settings page switch]
Swipe left on any page to adjust to the system settings page；

( the system settings page)

[Function settings page switch]
Swipe right on any page to adjust to the function setting page;

(the function setting page)

[Camera control settings page switch]
Swipe down on any page can be adjusted to the camera control settings page；

(the camera control settings page)

[Motor control settings page switch]
Swipe up on any page can be adjusted to the motor control settings page；

(the motor control settings page)

Shortcut Function Page

[Shortcut Function Setting]

1. Shortcut function title area；
2. Parameter information setting area；
3. “ ”Add function icon；

1. Click “ ”add shortcut functions to the left and right sides; If the function icons on the left and right have been added (picture 2); can swipe down in the shortcut function title area to continue adding；
2.  Select the function icon to replace；
3.  Select the function icon and click“ ”to delete；
4. Click“F-KEY ”to enter F key Setting（picture3)；
5. “ ”Return key；
   
6. The F key has 4 physical keys, which can be customized; Select any button in this area in the function icon “2” for custom function settings;
7. “ ”Return key；
   

Click“ ”，The parameter information setting is displayed at the bottom(Picture 5)；

Hold“ ”and slide to the right, The bottom will jump to the function parameter settings; For other functions, users can repeat the above operations or directly click to set parameters (Picture 6);

Hold and slide to the left, The bottom will jump to the function parameter settings; For other functions, you can repeat the above operations or directly click to set parameters (Picture 7);

If this feature is not required, Long press“ ”to jump to (picture 8) for function replacement/deletion；

Setting Page

[Image Settings]

1. Click “ ” ；
2. Parameter setting information；
3. Parameter setting information(Next page )；
4. Display the number of the page of Image parameter setting; Swipe left and right in the bottom information area to switch pages；

[System Setting]

1. Click “ ” ；
2. System parameter setting information；

[LUT Setting]

1. Click“ ”；
2. LUT setting information；

[Version Setting]

1.  Click“ ”；
2. View version information and upgrades；

Camera control Page

[Camera Model Setting]

1. Click“ ” ；
2. Camera model options：Z CAM E2、
   BMPCC4K(BLE)、BMPCC、Canon、
   Canon（LANC）、Sony(MUTI)、
   Sony(LANC)、Sony(FW50)、
   Sony(FZ100)、Panasonic； Currently selected“BMPCC4K(BLE)”；
3. Display the number of the page of camera brands, Swipe left and right in the bottom information area to switch pages；

[Bluetooth Connection]

My device
Add new device
Disconnect

1. Click“ ”；
2. Select“ ”，Make Bluetooth connection( Successfully connected Bluetooth record);
3. Select “ ”, turn on the BMPCC4K/6K Bluetooth function and record the passcode (picture 1), enter the passcode on the monitor(Picture 2 and 3)，click“ ”，After successful connection, The Bluetooth icon will be displayed in yellow “ ” ；
4. Select“ ”to disconnect the Bluetooth connection；

[FOCUS Setting]

1. Click“FOCUS ”；
2. Adjust the parameter on the progress bar；
3. Record；

Motor Page

[Motor Setting]

1. Click to select channel options“ ”；
2. Select the channel option to set the channel parameters；
3. Record；
4. Adjust the motor stroke；

https://portkeys.shop

Address1406 14th Floor Block D Building 3 Phase I Tianan young Longgang district
Shenzhen China
AddressNo.2nd Floor Building A Jingjiang
Industrial Park NO.101 Shangwei Road
Longhua District Shenzhen Guangdong China
Service
Hotline:0755-89349931 Email:sales@pkscorp.com
website:www.portkeys.shop

Documents / Resources

PortKeys BM5 Touch Screen Monitor [pdf] User Manual BM5, Touch Screen Monitor