POLYCOOL Ice Maker User Manual

Based on the POLYCOOL Ice Maker manual, a flashing light on the control panel typically indicates that the machine is in standby mode or requires attention. While the manual does not explicitly use the phrase "flashing green," it details several indicator states that may cause the console to flash or beep:

• Standby Mode: The console activates as soon as the appliance is connected to power. If you have not pressed the START button, the unit may flash to indicate it is ready but not yet making ice.
• Water Level Issue: If the ADD WATER indicator is illuminated or flashing, the reservoir is empty. Disconnect the appliance, fill the reservoir to just beneath the ice tray, and reconnect.
• Ice Tray Full: If the ICE FULL indicator is on, the machine will stop producing ice until some is removed.
• Internal Blockage: If both ICE FULL and ADD WATER indicators are active at the same time, the ice shifting "comb" may be blocked. Press STOP, gently clear any ice build-up, wait 3 minutes, and press START again.

If the button continues to flash and the machine will not start after pressing START, ensure the unit has been standing upright for at least 2 hours and check that the power supply is stable.