PluginEnergy PE01E Wi-Fi Smart Plug

Product parameters

• Fea.lun!!s: Mobile ph11ne control, 1witch,countdown, timing
• Pow9r;16A
• Rated power: 1000-3840W
• Input voltage : 100V-240V
• Output voltage : 100V-240V
• C11mmunlca1Ioo: Wlfl (2.4G) IEEE802.11b/g/n 1- Bluetooth Cer1ifica1ion : CE{RoHS
• Overtoed protection : Stand by
• Applicalion-sui:,i:,0rt : ISO”.O orAndroid 4.2 and higher
• Shell material: PC: l)lastic• VMO..s.ilicone
• Oper11.tlng l!’!mper1111ure: -10’t-50’C
• Product size (mm): 50• so• 06
• Package sl?a(mmrss • 56 • sa
• N.W.:92.59
• G.W.:115g

Instructions

1. Download Smart Life app /Tuy a smart a pp on mobile phone
2. Register an account and log in;
3. The product and mobile phone are covered by 2.4G network. and the mobile phone is connected to 2.4G Wifi network;
4. When the prodmt is powfl!red on, prus and hold thfl! product button for 3-5 seconds, and the indicator light flashes;
5. Open the app end add products(see page 18-21 for two addition methods)

Warm Tips

• Please check whether the device is connected with power and your phone is connected wiht WiFi.
• Chfl!ck routfl!rs:lfthe router is dual-band routfl!r,plfl!,Ue select
  • 2.4GHz network to add device,you also need to open trle router broadcasting function.
• Set up the wireless router:set encryption method as WPA2-PSK authoruution type•, AES.or set both as auto.The Wireless mode cannot be only SGHz.Please name router WiFi in English order to stay strong WiFi signal,please ko!’!ep device 11nd router within a certain distance .
• Check whether connected devices have reached the Maximum number router connection.if so,p leese try to turn off the WiFi connection of some devicei.
• Make sure router wireleu MAC filtering function is enabled.
• Remove thali! device from theft! filter list and make surf! that routfl!r is not prohibiting device from connection.
• Mal::e sum the entered !)How word is correct when adding a new device.
• A.?? for more operations, please refer to the corresponding application tutorial.

Add Manually

1. Manual addition – socket
2. Enter the 2.4GHz WiFi account password

Add Manually

1. Follow the prompts to go to prompts to go to thanartstap.
2. Added successfully.

Auto Scan

• Turn on buloothoth and select auto discovery
• E11ter the 2.4GHz WIFi  account password

1. Follow the prompts to go to prompts to go to thanartstap.
2. Added successfully.

Thank You

REMARK

1. The pictures used in this manual are IOS app interslice, Android -.,:reason in bit different.
2. Productl!Od 50f’twsreul)date perfodially, the number and app interlace in this are only for example. No ertra notification on further change.

Documents / Resources

PluginEnergy PE01E Wi-Fi Smart Plug [pdf] User Manual PE01E Wi-Fi Smart Plug, PE01E, Wi-Fi Smart Plug, Smart Plug, Plug

References

• User Manual