Questions Anonymous asks 2026-09-07 21:15:31

Does the clock function without the external unit?

Se non ho l’unità esterna all’orologio funziona ugualmente

Context

Asking about the functionality of the BRESSER MyTime iO Wall Clock when the external sensor is not present.

Accepted answer manuals.plus 2026-09-07 21:23:21

Yes, the BRESSER MyTime iO Wall Clock will still function as a clock without the external unit (remote sensor). However, its features will be limited as follows:

  • Timekeeping: The clock will continue to display the time. It uses a DCF radio signal for automatic time setting, which is independent of the external sensor.
  • Indoor Data: The clock will still display the indoor temperature and indoor humidity, as these sensors are built into the main wall clock unit.
  • Outdoor Data: The outdoor temperature display (marked as 'OUT' on the dial) will remain blank or will not show data, as this information is transmitted specifically from the external remote sensor.

If you are using the clock without the sensor, you do not need to perform the sensor installation steps (Steps 6-8 in the manual), but ensure you have removed the locking pin (A) from the clockwork to allow the hands to move.

8020210CM30008020210GYE0008020210GYE000 MyTime iO Wall ClockBRESSERBRESSERMyTime iO Wall Clock
Open related manual Ask another question
Does the MyTime iO Wall Clock function without the external sensor? 1 answer • Yes, the BRESSER MyTime iO Wall Clock will still function as a clock without the external sensor, but its features will be... Why are the digital numbers on my clock display faint even after changing the batteries? 1 answer • If the digital numbers on your BRESSER MyTime iO Wall Clock are faint or difficult to see after a battery change, please...

Answer this question

Answers are reviewed before publication.