Instructions for FAST models including: UNITY Magnifier Mount OMNI, UNITY, Magnifier Mount OMNI, Mount OMNI, Magnifier OMNI, OMNI

OMNI - MAGNIFIER MOUNT - SRS Tactical

2022-05-15 — Up-end and seat Magnifier in FAST mount arm (do not use shims from OEM magnifier kits). Insert included two large screws in EOTech, Trijicon, ...

FST-OMNI-Instruction..>

Index of /pdf

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 717.66KB

Document Document

MAGNIFIER MOUNT - OMNI
WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
NOTE: Do not adjust Pivot Bolt or disassemble mount. Doing so will void warranty
1 Remove Magnifier from factory mount and set it aside.
Up-end and seat Magnifier in FAST mount arm (do not use shims from OEM magnifier kits). Insert included two large
2 screws in EOTech, Trijicon, or Vortex optics. Use included four small screws and Juliet Adapter in Sig Sauer optics. Secure
Large screws using a T25 bit driver. Secure Small screws using a T10 bit driver. Lightly snug all screws before applying final torque to any. TORQUE LARGE SCREWS TO 35 IN-LBS. TORQUE SMALL SCREWS TO 13 IN-LBS.
©Copyright 2021, UNITY Tactical. All Rights Reserved.

MAGNIFIER MOUNT - OMNI
3 FAST Magnifier Mounts use a Force-to-Overcome mechanism. 4 Grasp magnifier body and pivot assembly down to stow position. Repeat
in reverse to bring magnifier back into active position.
©Copyright 2021, UNITY Tactical. All Rights Reserved.