1. Wprowadzenie
The ATOMSTACK P1 is a portable 5W diode laser engraver and cutter designed for precision work on various materials. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting.
Image 1.1: The ATOMSTACK P1 laser engraver, showcasindzięki kompaktowej konstrukcji iampgrawerowane przedmioty.
1.1 Główne cechy
- Laser diodowy 5W: Suitable for engraving and cutting a wide range of materials.
- Wszechstronna kompatybilność materiałowa: Engraves wood, bamboo, paper, leather, cardboard, cork, stone, and more.
- AtomStack Software: Free, user-friendly software with design library and material parameter recommendations. Compatible with LightBurn (sold separately).
- Wysoka precyzja: CoreXY structure and dual motor drive for up to 0.1mm positioning accuracy.
- Kompaktowy i przenośny: Engraving area of 110×110mm, footprint 265×303×185mm, weight approximately 3kg.
- Grawerowanie z dużą prędkością: Up to 10,000mm/min.
- Funkcje bezpieczeństwa: Fully enclosed design with visible window, built-in focus bar, USB safety interlock, secure enclosure detection, and gyro-based tilt detection.
2. Wytyczne bezpieczeństwa
Operating a laser engraver requires adherence to strict safety protocols to prevent injury and damage. Read and understand all safety instructions before operating the ATOMSTACK P1.
2.1 Ogólne środki ostrożności
- Ochrona oczu: Always wear appropriate laser safety glasses when the laser is active and the enclosure is open. The P1 features a visible window for observation, but direct exposure to the laser beam can cause permanent eye damage.
- Wentylacja: Używaj grawerki w dobrze wentylowanym pomieszczeniu, aby rozproszyć opary i dym powstające podczas grawerowania.
- Materiały łatwopalne: Do not engrave highly flammable materials without proper precautions. Keep a fire extinguisher nearby.
- Nadzór: Never leave the engraver unattended during operation.
- Dzieci i zwierzęta: Trzymaj dzieci i zwierzęta domowe z dala od obszaru operacyjnego.
- Zasilanie: Use only the provided power adapter. Ensure the power supply is stable and correctly grounded.
2.2 Wbudowane funkcje bezpieczeństwa
- Całkowicie zamknięta konstrukcja: The P1 features a fully enclosed design with an orange visible window to contain laser light and fumes.
- Zabezpieczenie przed otwarciem pokrywy: The engraving process automatically pauses if the lid is opened during operation.
- Wykrywanie bezpiecznej obudowy: Ensures the enclosure is properly closed before operation.
- Detekcja przechyłu oparta na żyroskopie: Automatically stops operation if the machine is tilted or moved unexpectedly.
- Blokada bezpieczeństwa USB: Prevents operation if the USB connection is interrupted.
Obraz 2.1: Koniecview of the ATOMSTACK P1's safety features, including the enclosed design and various detection systems.
3. Zawartość opakowania
Upon unboxing your ATOMSTACK P1, verify that all components are present and undamaged. Refer to the packing list included with your device for a complete inventory.
Video 3.1: An unboxing video for the AtomStack P1, demonstrating the contents of the package and initial setup steps.
4. Konfiguracja
The ATOMSTACK P1 is designed for quick setup. Follow these steps to prepare your engraver for its first use.
4.1 Początkowe umiejscowienie
- Ustaw grawer na stabilnej i równej powierzchni.
- Ensure adequate clearance around the machine for ventilation and access.
4.2 Połączenie zasilania
- Connect the power adapter to the engraver's power input port.
- Podłącz zasilacz do odpowiedniego gniazdka elektrycznego.
- Turn on the main power switch, usually located on the side or back of the unit.
4.3 Laser Module Installation/Replacement
If your laser module is not pre-installed or needs replacement, follow these instructions:
- Ensure the engraver is powered off and unplugged.
- Carefully remove the existing laser module or access the installation slot.
- Align the new laser module with the mounting mechanism and secure it in place.
- Connect any necessary cables to the laser module.
Video 4.1: Instructions on how to replace the laser module on the AtomStack P1 engraver.
5. Instrukcja obsługi
The ATOMSTACK P1 can be operated using the dedicated AtomStack Studio software or a compatible third-party application like LightBurn.
5.1 Instalacja i podłączenie oprogramowania
Download and install the AtomStack Studio software from the official ATOMSTACK website or app store. The software supports Windows/macOS (USB) and iOS/Android (WiFi/AP).
Image 5.1: The AtomStack Studio software interface shown across multiple devices, highlighting its user-friendly design.
5.1.1 Connecting via AtomStack App (WiFi/AP)
- Ensure your P1 is powered on.
- Open the AtomStack app on your iOS or Android device.
- Follow the in-app instructions to connect to the P1 via WiFi or Access Point (AP) mode.
Video 5.2: A guide on how to connect the P1 laser engraver using the AtomStack mobile application.
5.1.2 Connecting via AtomStack Studio Software (USB)
- Connect the P1 to your Windows or macOS computer using the provided USB cable.
- Open the AtomStack Studio software.
- The software should automatically detect the connected device. If not, follow the software's connection prompts.
Video 5.3: Demonstrates the process of connecting the P1 engraver to a computer using the AtomStack Studio software.
5.1.3 Connecting via LightBurn Software (USB)
The P1 is compatible with LightBurn software (purchased separately). Refer to LightBurn's documentation for specific connection instructions.
Video 5.4: Instructions on how to connect the P1 laser engraver using LightBurn software.
5.2 Proces grawerowania
- Przygotuj materiał: Place the material to be engraved or cut onto the working platform. Ensure it is flat and securely positioned.
- Regulacja ostrości: Use the built-in focus bar to achieve precise focus. This ensures optimal engraving quality.
- Wybór projektu: In the AtomStack Studio software or app, select or create your desired design.
- Ustawienia parametrów: Adjust engraving parameters (power, speed, passes) based on the material type. The software provides recommended settings.
- Przedview i stanowisko: Use the framing function to preview the engraving area on your material. Adjust the material or design position as needed.
- Rozpocznij grawerowanie: Close the enclosure lid and initiate the engraving process from the software or app. The machine will automatically pause if the lid is opened during operation.
Obraz 5.5: Zbliżenie view of the ATOMSTACK P1 performing a detailed engraving, demonstrating its precision.
6. Korzystanie z akcesoriów
The ATOMSTACK P1 supports various accessories to expand its capabilities, such as rotary chucks and rollers for cylindrical objects.
6.1 Using the R8 Rotary Chuck
The R8 Rotary Chuck (sold separately) allows for engraving on cylindrical objects. Ensure the chuck is properly installed and configured in the software.
Video 6.1: A tutorial demonstrating how to set up and use the R8 Rotary Chuck with the P1 engraver.
6.2 Using the R6 Rotary Roller
The R6 Rotary Roller (sold separately) is another accessory for engraving cylindrical items. Adjust the roller gap as needed for different object diameters.
Video 6.2: A demonstration on how to use the R6 Rotary Roller with the P1 laser engraver.
Image 6.3: The ATOMSTACK P1 shown with optional accessories, including rotary chucks, rotary rollers, and an air purifier.
7. Konserwacja
Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P1.
7.1 Czyszczenie
- Soczewka laserowa: Aby zachować jakość grawerowania, okresowo czyść soczewkę lasera miękką, niepozostawiającą włókien ściereczką i płynem do czyszczenia soczewek.
- Obszar roboczy: Po każdym użyciu należy usunąć zanieczyszczenia i kurz z platformy grawerującej i wnętrza urządzenia.
- Zewnętrzny: Przetrzyj powierzchnie zewnętrzne środkiem adamp płótno. Nie używaj ostrych chemikaliów.
7.2 Pielęgnacja modułu laserowego
The laser module is a critical component. Handle it with care and refer to the replacement instructions if necessary.
8. Rozwiązywanie Problemów
This section addresses common issues you might encounter with your ATOMSTACK P1.
8.1 Typowe problemy i rozwiązania
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Engraver not powering on | Power cable disconnected, power switch off, faulty power adapter | Check power connections, ensure switch is on, try a different outlet. |
| Laser nie działa lub jego moc jest słaba | Incorrect focus, dirty laser lens, incorrect software settings, faulty laser module | Adjust focus, clean laser lens, verify power/speed settings in software, consider laser module replacement. |
| Connection issues (USB/WiFi) | Loose cable, incorrect WiFi settings, software driver issues | Ensure cables are secure, reconfigure WiFi, reinstall software drivers. |
| Jakość grawerowania jest słaba/niespójna | Incorrect focus, material not flat, inappropriate power/speed settings, dirty lens | Re-focus the laser, ensure material is flat, adjust engraving parameters, clean the lens. |
| Maszyna zatrzymuje się podczas pracy | Lid opened, machine tilted (safety feature triggered), USB disconnected | Ensure lid is closed, place on a stable surface, check USB connection. |
9. Specyfikacje
Technical specifications for the ATOMSTACK P1 5W Laser Engraver.
| Funkcja | Szczegół |
|---|---|
| Model | P1 |
| Laser Power Output | 5 000 mW (40 W) |
| Klasa laserowa | KLASA 1 |
| Obszar grawerowania | 110mm × 110mm (Diode Laser) |
| Prędkość grawerowania (maks.) | 10,000mm/min |
| Dokładność pozycjonowania | Do 0.1 mm |
| Wymiary produktu | 11.93 x 10.43 x 7.28 inches (265×303×185mm) |
| Waga przedmiotu | 10.73 pounds (approx. 3kg) |
| Łączność | USB (Windows/macOS), WiFi/AP (iOS/Android) |
| Zgodność oprogramowania | AtomStack Studio App/Software, LightBurn (sold separately) |
Image 9.1: Detailed specifications and material compatibility chart for the ATOMSTACK P1, including both single and dual laser versions.
10. Gwarancja i wsparcie
Aby uzyskać informacje dotyczące gwarancji, pomocy technicznej lub zapytań serwisowych, zapoznaj się z oficjalną stroną ATOMSTACK webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.
- Urzędnik Webstrona: Visit the ATOMSTACK official webwitryna zawierająca najnowsze zasoby pomocy technicznej, odpowiedzi na często zadawane pytania i informacje kontaktowe.
- Obsługa klienta: Contact ATOMSTACK customer support for assistance with product issues or technical guidance.