BOTSLAB 9ft Type C Hardwire Kit Instruction Manual for G300H Plus and G980H Series Dash Cams

Produkt ponadview

The BOTSLAB 9ft Type C Hardwire Kit is designed to provide continuous power and parking monitoring capabilities for your compatible dash cam. It ensures your dash cam operates 24/7, even when your vehicle is turned off, while protecting your car's battery from draining.

This kit is specifically compatible with Botslab G300H Plus Series and G980H Series dash cams, featuring a Type-C port for versatile installation in most car types.

Image: Dash cam display showing "Secure Parking Protection" with options for Time-Lapse Recording (Parking Mode) and Normal Recording (Driving Mode).

Co jest w pudełku

• Hardwire Kit x1
• Podręcznik użytkownika x1

Image: The contents of the product box, including the hardwire kit and a user guide.

Konfiguracja i instalacja

The hardwire kit provides a simple three-step installation process to integrate your dash cam with your vehicle's power system for continuous operation and parking monitoring.

1. Step 1: Test Power Sources
   Use a multimeter to check for a 12V constant power source and the ACC power in your car's fuse box.
2. Step 2: Set up the Wires
   Connect the Yellow Wire (ACC) to the ACC power source, the Red Wire (VCC+) to constant power, and the Black Wire (GND-) to a grounding point.
3. Step 3: Connect the Dash Cam
   Attach the kit's Type-C connector to your Botslab dash cam (G300H Plus & G980H Series).

Image: Visual guide showing the three steps for installing the hardwire kit: testing power sources, setting up wires, and connecting the dash cam.

Instrukcja wideo instalacji

Video: An official Botslab installation guide demonstrating how to set up the hardwire kit for a dash cam.

Instrukcja obsługi

Once installed, the hardwire kit enables your dash cam to operate continuously, providing various monitoring features.

• Ciągła moc: The kit converts your vehicle's 12V-30V power to 5V/2.4A, ensuring stable power supply to the dash cam.
• Działanie automatyczne: The dash cam will automatically switch between driving mode (normal recording) and parking mode (time-lapse or collision-triggered recording) based on your vehicle's status.

Image: Illustration showing the Botslab hardwire kit with a 9ft cable, compatible with G300H Plus and G980H Series dash cams and suitable for all car types.

Funkcja monitora parkowania

The hardwire kit activates the dash cam's 24-hour parking monitoring feature, offering peace of mind when your vehicle is unattended.

• Monitorowanie 24-godzinne: Provides continuous surveillance of your parked vehicle.
• Tryby nagrywania: Supports time-lapse recording for extended periods or collision-triggered normal recording to capture incidents.

Image: Dash cam display illustrating "Secure Parking Protection" with options for Time-Lapse Recording (Parking Mode) and Normal Recording (Driving Mode), showing a scenario of potential vehicle tamping.

Prevent Battery Drain

Equipped with under-voltage protection, the hardwire kit safeguards your vehicle's battery from excessive discharge.

• Under Voltage Ochrona: Automatycznie wyłącza zasilanie kamery samochodowej w przypadku rozładowania akumulatora pojazdu.tage drops below a safe threshold, preventing battery drain.
• Tomtage Konwersja: Converts 12V-30V input to a stable 5V/2.4A output for optimal dash cam performance.

Image: Graphic detailing the "Prevent Battery Drain" feature, highlighting the DC12V-30V voltage range and 5V/2.4A output voltage.

Specyfikacje

Rozwiązywanie problemów

If you encounter any issues with your BOTSLAB Hardwire Kit, please refer to the following common troubleshooting steps:

• Brak zasilania kamery samochodowej:
  • Ensure all wire connections (ACC, VCC+, GND-) are secure and correctly connected to the fuse box.
  • Verify that the vehicle's fuse box is supplying power to the connected fuses.
  • Check the Type-C connection to the dash cam for proper seating.
• Battery Drain Warning:
  • Confirm the under-voltage protection settings on your dash cam (if configurable) are appropriate for your vehicle's battery.
  • Ensure your vehicle's battery is in good health and fully charged.
• Parking Monitor Not Activating:
  • Sprawdź ustawienia kamery samochodowej, aby upewnić się, że tryb parkingowy jest włączony i prawidłowo skonfigurowany.
  • Verify the hardwire kit is providing continuous power to the dash cam when the vehicle is off.

Gwarancja i wsparcie

For warranty information or technical support, please contact BOTSLAB Official customer service. Keep your purchase receipt and product serial number handy for faster service.

• Informacje kontaktowe: Refer to the official BOTSLAB website or the contact details provided in your user guide.
• Zasoby internetowe: Visit the BOTSLAB official store on Amazon for FAQs and additional product information: BOTSLAB Official Store