ATKGEAR X1 Series Wireless Gaming Mouse User Manual

1. Wprowadzenie

Thank you for choosing the ATKGEAR X1 Series Wireless Gaming Mouse. This ultralight, ergonomic gaming mouse is designed for precision and speed, offering versatile connectivity options and customizable performance. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new device to ensure optimal performance.

For the best experience, please read this manual thoroughly before using the mouse.

2. Zawartość opakowania

Please check the package contents upon unboxing. If any items are missing or damaged, contact ATKGEAR support.

• ATKGEAR X1 Series Wireless Gaming Mouse
• Odbiornik bezprzewodowy 2.4 GHz (klucz USB)
• Kabel do ładowania/danych danych z USB-C na USB-A
• Instrukcja obsługi (ten dokument)

Image 1: ATKGEAR X1 Series Wireless Gaming Mouse with its included accessories.

3. Przewodnik konfiguracji

3.1 Ładowanie myszy

Before first use, it is recommended to fully charge your ATKGEAR X1 mouse.

1. Connect the USB-C end of the charging cable to the mouse's USB-C port.
2. Connect the USB-A end of the charging cable to a powered USB port on your computer or a USB wall adapter.
3. The LED indicator on the mouse will show charging status (e.g., solid red for charging, green for fully charged).

3.2 Łączenie się przez sieć bezprzewodową 2.4 GHz

For optimal gaming performance, use the 2.4GHz wireless connection.

1. Znajdź w opakowaniu odbiornik bezprzewodowy 2.4 GHz (klucz USB).
2. Plug the wireless receiver into an available USB port on your computer.
3. Turn on the mouse using the power switch located on the bottom of the mouse. Select the 2.4GHz mode (usually indicated by a specific switch position or LED color).
4. Your computer should automatically detect and install the necessary drivers. The mouse is ready for use when the LED indicator shows a stable connection.

3.3 Łączenie przez Bluetooth

For general use or connecting to devices without a USB-A port, use Bluetooth mode.

1. Turn on the mouse and switch it to Bluetooth mode (usually indicated by a specific switch position or LED color).
2. On your computer or device, go to Bluetooth settings and ensure Bluetooth is enabled.
3. The mouse should appear in the list of available devices (e.g., "ATKGEAR X1"). Select it to pair.
4. Postępuj zgodnie ze wskazówkami wyświetlanymi na ekranie, aby dokończyć proces parowania.

3.4 Connecting via Wired USB-C

For a direct, zero-latency connection or while charging, use the wired mode.

1. Connect the USB-C end of the cable to the mouse.
2. Podłącz koniec USB-A kabla do portu USB komputera.
3. The mouse will automatically switch to wired mode and function as a standard USB mouse.

3.5 ATK HUB Software Installation

To customize DPI, macros, LED indicators, debounce time, and polling rate, download and install the ATK HUB software.

• Visit the official ATKGEAR webStrona (www.atkgear.com/support) to download the latest version of ATK HUB.
• Aby zainstalować oprogramowanie, postępuj zgodnie z instrukcjami wyświetlanymi na ekranie.
• Launch ATK HUB to access customization options.

4. Instrukcja obsługi

4.1 Podstawowe funkcje

The ATKGEAR X1 mouse features standard left/right click buttons, a scroll wheel, and additional programmable buttons. Refer to the ATK HUB software for button assignment and macro creation.

4.2 Regulacja DPI

The mouse supports up to 26,000 DPI. You can adjust the DPI sensitivity on-the-fly using the dedicated DPI button (if available) or through the ATK HUB software. The LED indicator may change color to reflect the current DPI setting.

4.3 Dostosowanie częstotliwości odpytywania

The X1 Series supports an 8000Hz wireless polling rate for ultra-fast response times. The polling rate can be configured via the ATK HUB software to match your preference and system capabilities.

4.4 Przełączanie trybów

Use the switch on the bottom of the mouse to toggle between 2.4GHz wireless, Bluetooth, and wired USB-C modes. Ensure the correct mode is selected for your desired connection type.

4.5 Wskaźnik baterii

The mouse features an LED indicator that displays battery status. Consult the ATK HUB software or the product's quick start guide for specific LED patterns indicating battery levels (e.g., low battery warning, charging status).

5. Konserwacja

5.1 Czyszczenie

• Use a soft, dry, lint-free cloth to clean the surface of the mouse.
• W przypadku uporczywych zabrudzeń należy delikatnieampPrzetrzyj ściereczkę wodą lub delikatnym środkiem czyszczącym. Unikaj silnych środków chemicznych.
• Nie dopuść do przedostania się płynów do wnętrza myszy.
• Regularly clean the optical sensor area on the bottom of the mouse to ensure accurate tracking.

5.2 Przechowywanie

Jeśli mysz nie jest używana przez dłuższy czas, przechowuj ją w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur. Upewnij się, że mysz jest wyłączona, aby oszczędzać baterię.

6. Rozwiązywanie Problemów

7. Specyfikacje

8. Gwarancja i wsparcie

ATKGEAR products come with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official ATKGEAR webstrona.

For technical support, troubleshooting assistance, or to download the latest drivers and software, please visit:

www.atkgear.com/support

You may also contact our customer service team directly through the contact information provided on our webstrona.