MAIMEIMI Universal Motorcycle Digital Speedometer Gauge

1. Koniec produktuview

The MAIMEIMI Universal Motorcycle Digital Speedometer Gauge is a multi-functional instrument designed for motorcycles. It provides real-time data including speed, engine RPM, gear indication, odometer readings, oil level, and steering indicators. This gauge cluster offers integrated data monitoring for various riding conditions.

Obraz 1.1: Przód view of the MAIMEIMI Universal Motorcycle Digital Speedometer Gauge.

Główne cechy:

• Zintegrowany wyświetlacz: Shows speed, tachometer (RPM), 1-6 gear indicator, odometer (ODO/TRIP), oil level, and steering indicators.
• Adjustable Tire Size: Compatible with various tire sizes, adjustable from 40" to 118".
• Szeroki zakres prędkości: Speed display range of 0-199 MPH.
• Zakres obrotomierza: 0-12 (x1000r/min).
• Śledzenie przebiegu: Cumulative mileage (ODO) 0-999999 KM/MILES, subtotal mileage (TRIP) 0.0-999.9 KM/MILES.
• Alarm niskiego poziomu oleju: Flashing outer frame and indicator light when oil level is below the alarm value.
• Wodoodporna konstrukcja: Constructed from high-quality ABS material with an epoxy resin sealed LCD screen for clear visibility in various weather conditions.
• Uniwersalna kompatybilność: Suitable for most 1/2 cylinder motorcycle engines with a 12V DC voltagsystem e.

Image 1.2: The speedometer installed on a motorcycle, showing its integration.

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• 1 x Motorcycle Speedometer
• 1 x Speed Sensor
• 1 x wspornik montażowy
• 1 x Installation Instruction (Electronic version available upon request)

3. Specyfikacje techniczne

Image 3.1: Detailed dimensions of the speedometer gauge.

4. Konfiguracja i instalacja

Installation of the speedometer requires basic electrical knowledge. If you are unsure, consult a professional motorcycle mechanic.

4.1 Schemat okablowania

Refer to the following diagram for proper wiring connections. Ensure all connections are secure and insulated to prevent short circuits.

Image 4.1: Wiring connections for the speedometer and speed sensor.

Main Connector (9-pin):

• Czarny: IGN+ (Ignition Positive)
• Niebieski: Światła drogowe
• Zielony: Power supply (Ground)
• Fioletowy: Normal current+
• Yellow & White: Poziom oleju
• Pomarańczowy: Turn left signal
• Blue & White: Sygnał prędkości
• Brązowy: Podświetlenie
• Jasny niebieski: Turn right signal

Speed Sensor Connector (3-pin):

• Czerwony: Speed signal +
• Zielony: Speed signal -
• Żółty: Speed signal +
• Czarny: Signal (Output)

Gear Indicator Connector (6-pin):

• Różowy: 1 bieg
• Niebieski czerwony: 2 bieg
• Green & Black: 3 bieg
• Yellow & Red: 4. bieg
• Brown & White: 5. bieg
• Green & Red: Neutralny
• Szary drut: 6. bieg

4.2 Tire Circumference Adjustment

The speedometer's accuracy depends on correct tire circumference settings. The adjustable range is 40"-118". Consult your motorcycle's manual for the exact tire circumference or measure it accurately. The adjustment procedure is typically performed during initial setup via the button on the gauge.

5. Instrukcja obsługi

5.1 Funkcje wyświetlacza

The digital display provides comprehensive information at a glance:

Image 5.1: Labeled interface display showing various indicators and readings.

• Prędkość: Digital display in MPH or KM/H.
• Tachometr: Analog dial (x1000 RPM) and digital display.
• Wskaźnik biegów: Displays current gear (1-6) or Neutral (N).
• Licznik kilometrów (ODO): Łączny przebieg.
• Licznik podróży (TRIP): Resettable mileage for individual trips.
• Poziom oleju: Bar graph indicator.
• Wskaźniki kierunkowskazów: Left and Right arrows illuminate.
• High Beam Indicator: Symbol illuminates when high beams are active.
• Neutral Gear Indicator: 'N' symbol illuminates when in neutral.
• Alarm paliwowy: Flashing icon when fuel level is low.

5.2 Unit Switching and Display Modes

The single button on the gauge allows for switching between different display modes and units.

Image 5.2: Visual representation of unit and display mode switching.

• Switching Speed Units (MPH/KM/H): After the instrument panel is activated, press and hold the button for 3-5 seconds. The speed unit will automatically switch.
• Toggling Odometer/Trip Meter: A short press of the button will toggle between the ODO (cumulative mileage) and TRIP (subtotal mileage) readings.

5.3 Low Oil Alarm Function

The speedometer is equipped with a low oil alarm. If the oil level falls below a predetermined threshold, the outer frame of the digital display will flash, and the dedicated empty oil indicator light will illuminate to alert the rider.

Image 5.3: Display clarity in both daytime and nighttime conditions.

6. Pielęgnacja i konserwacja

6.1 Wodoodporność

The MAIMEIMI motorcycle speedometer is designed with good waterproof performance. The high-quality ABS material and epoxy resin sealed LCD screen allow for normal operation even in rainy weather. However, avoid prolonged submersion or high-pressure water jets directly on the unit.

Image 6.1: The speedometer demonstrating its waterproof capabilities.

6.2 Ogólna opieka

• Clean the display and housing with a soft, damp płótno.
• Nie należy używać środków czyszczących o działaniu ściernym, rozpuszczalników ani silnych środków chemicznych, gdyż mogą one uszkodzić wyświetlacz lub obudowę.
• Upewnij się, że wszystkie połączenia są szczelne i nie są skorodowane.
• Periodically check the mounting bracket for security.

7. Rozwiązywanie Problemów

If you encounter issues with your speedometer, consider the following common troubleshooting steps:

• Brak zasilania/wyświetlacza: Check all wiring connections, especially the power supply (Green wire for ground, Black wire for IGN+). Ensure the motorcycle's battery is charged and providing 12V DC.
• Incorrect Speed Reading: Verify the tire circumference setting is correct. Check the speed sensor wiring (Blue & White wire) and ensure the sensor is properly installed and functioning.
• Tachometer Not Working: Ensure the tachometer signal wire (if applicable and connected) is correctly wired.
• Gear Indicator Issues: Check the wiring for each gear signal. Ensure the gear sensor on your motorcycle is functioning correctly.
• Oil Level Indicator Malfunction: Check the Yellow & White wire connection to the oil level sensor. Ensure the oil level sensor itself is working.
• Indicators (Turn/High Beam) Not Working: Verify the Orange (Left Turn), Light Blue (Right Turn), and Blue (High Beam) wires are correctly connected to their respective motorcycle circuits.

If these steps do not resolve the issue, it is recommended to seek assistance from a qualified motorcycle technician or contact MAIMEIMI customer support.

8. Support and Assistance

For further assistance or if you have questions regarding the installation or operation of your MAIMEIMI Universal Motorcycle Digital Speedometer Gauge, please refer to the following:

• Instrukcja elektroniczna: If a physical user manual was not included in your package, an electronic version can be requested from MAIMEIMI customer support.
• Pomoc Profesjonalna: For complex installation or troubleshooting, it is advisable to consult with experienced maintenance personnel or a certified motorcycle mechanic.
• Contact MAIMEIMI: For direct support, please reach out to MAIMEIMI customer service through the platform where the product was purchased.