Instrukcja obsługi rękawic przemysłowych Ansell HyFlex 11-541

1. Wprowadzenie

This manual provides essential information for the safe and effective use, care, and maintenance of your Ansell HyFlex 11-541 industrial gloves. Please read these instructions carefully before using the product. Proper use and maintenance will ensure optimal performance and extend the lifespan of the gloves.

Figure 1: Ansell HyFlex 11-541 Industrial Glove. This image displays a single grey Ansell HyFlex 11-541 glove worn on a hand, highlighting its design and the printed model number and safety standards on the cuff.

2. Funkcje produktu

The Ansell HyFlex 11-541 gloves are designed for industrial applications requiring dexterity and protection. Key features include:

• Foam Nitrile Coating: Provides excellent grip in dry and light oil conditions, enhancing tactile sensitivity.
• Ultralight Weight: Engineered for unparalleled dexterity and refined mobility, reducing hand fatigue during prolonged use.
• ZONZ Knitting Technology: Utilizes selected yarns and varying stitch designs to tailor overall glove fit, enhancing hand movement for higher dexterity and reduced fatigue.
• Silicone-Free Design: Suitable for paint and finish processes, preventing contamination.
• Dirt Masking Palm: The grey color and material composition help to mask dirt, allowing for longer wear times before needing cleaning or replacement.

3. Przeznaczenie

Ansell HyFlex 11-541 gloves are intended for general purpose industrial applications where light cut protection, dexterity, and grip are required. Typical applications include:

• Assembly and inspection of components
• Handling small parts
• Light fabrication
• Czynności konserwacyjne
• Opakowanie
• Montaż samochodów

Figure 2: Handling broken glass with Ansell HyFlex 11-541 gloves. This image shows a user wearing the gloves while carefully collecting shards of broken glass, demonstrating the gloves' utility in tasks requiring tactile sensitivity and protection.

Figure 3: Precision cutting task with Ansell HyFlex 11-541 gloves. This image illustrates a user wearing the gloves while performing a precision cutting task with a utility knife and ruler, highlighting the gloves' dexterity and grip.

4. Informacje dotyczące bezpieczeństwa

These gloves are designed to provide protection against certain mechanical risks. However, no glove can provide complete protection against all hazards.

• Do not use these gloves near moving machinery where entanglement is a risk.
• These gloves are not intended for protection against chemical hazards, extreme heat, or electrical risks.
• Inspect gloves for tears, punctures, or other damage before each use. Discard damaged gloves immediately.
• Ensure gloves fit properly. Ill-fitting gloves can impair dexterity and reduce protection.
• Consult relevant safety data sheets (SDS) for specific materials being handled to ensure appropriate personal protective equipment (PPE) is selected.

5. Przygotowanie do użycia

Before wearing your Ansell HyFlex 11-541 gloves, ensure your hands are clean and dry. Remove any jewelry that could snag or tear the gloves.

6. Instrukcja noszenia

1. Select the correct glove size for a comfortable and secure fit. Refer to the sizing guide in Section 9.
2. Gently slide your hand into the glove, ensuring fingers are fully seated in the finger stalls.
3. Adjust the glove to ensure a snug fit around the wrist without being overly tight.

7. Konserwacja i pielęgnacja

Proper care can extend the life of your gloves.

Czyszczenie:

• For light soiling, wipe the gloves with a damp płótno.
• For heavier soiling, the gloves can be hand washed in lukewarm water with a mild detergent.
• Dokładnie spłukać czystą wodą.
• Air dry away from direct heat or sunlight. Do not tumble dry.
• Do not use bleach or harsh chemicals, as this may degrade the glove material.

Składowanie:

• Store gloves in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep away from ozone and sources of ignition.

8. Specyfikacje

9. Przewodnik po rozmiarach

To ensure optimal comfort and protection, select the correct glove size. Measure the circumference of your palm at its widest point, excluding the thumb, and refer to the chart below.

Figure 4: Ansell Glove Sizing Chart. This chart provides instructions on how to measure palm circumference and correlates measurements in inches to glove sizes (6-12) and their corresponding alphanumeric designations (XS-3XL).

10. Gwarancja i wsparcie

Ansell products are manufactured to high-quality standards. For information regarding product warranty, returns, or technical support, please contact Ansell customer service or visit the official Ansell webstrona.

Ansell Webstrona: www.ansell.com