Instrukcja obsługi drukarki 3D Creality Ender 5 Max

1. Wprowadzenie

The Creality Ender 5 Max is a high-performance 3D printer designed for large-scale and high-speed additive manufacturing. Featuring a robust aluminum frame, precise linear rails, and dual Z-axis motors, it ensures stable and accurate printing. With a large build volume of 400x400x400mm and a maximum printing speed of 700mm/s, it is ideal for both large-scale projects and efficient batch production. The printer also includes advanced features such as 36-point automatic bed leveling, a 300℃ high-temperature extruder, and smart connectivity options for enhanced user experience.

Figure 1: Creality Ender 5 Max 3D Printer

2. Co znajduje się w pudełku

Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie wymienione poniżej elementy są obecne i nieuszkodzone.

• Ender 5 Max 3D Printer (Base Component, Top Component, Build Platform)
• Z-axis Components (x2)
• Uchwyt szpuli filamentu
• Screen + Bracket
• Footpads (x4)
• Tool Kit (Allen wrenches, open wrench, cutting plier)
• Kabel zasilający
• SampFilament
• Zawodowiecfiles (x4)
• Swivel Cable Clip
• Opaski kablowe
• TPFE Tubes for TPU
• Środek do czyszczenia dysz
• Dysk USB
• Dysza
• Szybki przewodnik instalacji
• Karta obsługi posprzedażnej
• Various Screws and Washers (M5x18, M4x12, M4x6, M5x22, M5x12 Button Head, M5x30, M5x12 Socket Head, M5x65, M3x6)

3. Instalacja i montaż

Follow these steps to assemble your Creality Ender 5 Max 3D Printer. Refer to the accompanying video for visual guidance.

1. Rozpakowywanie: Open the box, remove the top foam, and carefully take out all foams, parts, and accessories.
2. Złóż ramę bazową:
   • Prepare the four profiles and M5x18 screws.
   • Set up the network connection by attaching the first profile to the base component.
   • Flip the base sideways to reveal the bottom.
   • Fasten each profile from the bottom with two M5x18 screws.
   • Install the four footpads using M4x12 screws and washers.
   • Flip the assembled base to the upright position.
3. Mount Top Component:
   • Carefully mount the top component onto the four profiles. Ensure the Creality logo is above the base stickers 1 & 2, and no wires are pinched.
   • Secure the top with six M5x65 screws and washers.
4. Install Z-axis Components:
   • Remove the screws on top of the Z-axis components.
   • Place one Z-axis component inside a side frame. Keep the Z-axis component connector at the bottom and do not pull the Z-axis belt during assembly.
   • Fasten its bottom with two M5x22 screws.
   • Loosen the linear rod screws on the side.
   • Secure the top with two M5x12 (button head) screws.
   • Tighten the linear rod screws.
   • Repeat for the second Z-axis component on the opposite side.
5. Install Hotbed:
   • Wire up the two Z-axis motors beforehand.
   • Remove the hotbed power cover from the base.
   • Connect the bed leveling wire and lock it up.
   • Plug in the hotbed power cord tightly and lock the cord in the U-groove.
   • Reinstall the hotbed power cover. Buckle up the cover before tightening the screws.
   • Align the hotbed to the screw holes in the Z-axis components. Handle the hotbed at an angle to avoid collision.
   • Fasten it with eight M5x12 (socket head cap) screws.
6. Install Screen & Spool Holder:
   • Usuń profesjonalistęfile seal close to the screen cable.
   • Pass the cable through two holes in the top frame.
   • Install the screen bracket with M4x6 screws. Ensure no wires are caught under the bracket.
   • Connect the screen cable and snap the screen into the bracket.
   • Put away the screen cable in the profile and seal it with the profile foka.
   • Prepare the spool holder parts.
   • Install the material rack with M5x30 screws.
   • Mount the filament tube.
   • Screw on the universal clip seat with the open wrench.
   • Follow the notice and snap the extruder cable into the clip seat.
   • Tie the Extruder cable to the clip seat.
   • Connect the extruder cable.
   • Secure it with M3x6 screws.
   • Insert the Teflon tube into the extruder.
   • Wire up the filament run-out sensor and Y-axis motor.
   • Connect the XY endstops.
   • Usuń profesjonalistęfile seal nearby.
   • Bind the cables of endstops, extruder and run-out sensor.
   • Seal them in the profile.
   • Plug their bottom ends into the base.
   • Usuń profesjonalistęfile seal close to the X-axis motor.
   • Wire up the X-axis motor and seal the wire.
   • Wire up the LED indicator and light bar.
   • Plug the wire's bottom end into the base.
7. Power-on & Quick Setup:
   • Connect the power cable and switch on the printer.
   • Select a language on the screen.
   • Przeczytaj i zaakceptuj politykę prywatności.
   • Set up the network connection (Wi-Fi).
   • Wybierz swoją strefę czasową.
   • Bind with Creality Cloud as instructed (optional).
   • Conduct self-check. Ensure the printing platform is stable and do not touch the printer during self-check.
8. Print via USB Drive:
   • Set a proper nozzle temperature.
   • Cut the filament at a sharp angle.
   • Pull out the Teflon tube from the extruder.
   • Push the filament through the Teflon tube.
   • Open the extruder latch and insert the filament.
   • Lock the latch and put back the Teflon tube.
   • Podłącz dysk USB.
   • Wybierz file i rozpocznij drukowanie.

4. Główne cechy

• Large Printing Size: A build volume of 400 mm x 400 mm x 400 mm allows for creating large items or printing numerous small parts simultaneously.
  

  Figure 2: Illustration of the large build volume of the Ender 5 Max.

• Up to 700 mm/s Maximum Printing Speed: Equipped with 42-76 stepper motors driving X/Y axis movement, achieving up to 700 mm/s print speed and 20000 mm/s³ acceleration for efficient 3D printing.
  

  Figure 3: Speed comparison highlighting the 700mm/s maximum printing speed.

• Automatic Bed Leveling and Excellent First Layer: Features 36-point leveling for quick calibration and hot bed tilt calibration to ensure a solid and even first layer.
  

  Figure 4: Visual representation of the automatic bed leveling system.
• High Temperature 300℃ Extruder: Hardened extruder gears can withstand 500 hours of continuous extrusion, ensuring reliability for 24/7 production.
  

  Rysunek 5: Zbliżenie view of the high-temperature extruder gears.

• Ulepszony projekt:
  • 3-color status indicator light: Visible from up to 10 meters, informing the exact machine status (Running, Standing by, Error).
  • Robust frame and precise linear rail: Super reinforced structure with enlarged die-casting aluminum alloy frame parts and a precise linear rail on the X-axis.
  • More strength from dual Z-axis motors: Two independently motorized Z-axes with two pairs of feed screws, each assisted by 2 linear rods for higher accuracy.
  

  Figure 6: Depiction of the printer's solid structure, including the beefy frame, precise linear rail, and dual Z-axis motors.
  

  Figure 7: The 3-color status indicator light showing different operational states.

• Support Multiple Filaments: Compatible with Hyper PLA, PLA, PETG, TPU95A, ABS, ASA, PLA-CF, PA, PLA-Silk.
  

  Figure 8: Various filament types supported by the printer.

• Managing a Print Farm over WLAN: The brand-new Creality Print slicer includes over 40 filament presets and allows for managing multiple printers for production efficiency.
  

  Figure 9: Illustration of managing multiple printers via WLAN.

5. Instrukcja obsługi

Once assembled and powered on, the Creality Ender 5 Max is ready for operation. Ensure your printer is connected to the network for full functionality and access to Creality Cloud.

5.1 Pierwszy wydruk

1. Prepare Filament: Load your chosen filament onto the spool holder and feed it through the filament run-out sensor and into the extruder.
2. Ogrzewanie wstępne: On the printer's touchscreen, set the desired nozzle and bed temperatures according to your filament type.
3. Load G-code: Insert a USB drive containing your sliced G-code file do portu USB drukarki.
4. Wybierz i wydrukuj: Navigate the touchscreen menu to select your file from the USB drive. Confirm settings and initiate the print.
5. Wydruk monitora: Utilize the built-in camera (if installed) and Creality Cloud app to monitor your print progress remotely. The AI Lidar system will check the first layer for accuracy.

5.2 Drukowanie sieciowe

For advanced control and multi-machine management, connect your printer to your WLAN network during the initial setup or via the network settings menu. Use the Creality Print software on your computer to send print jobs directly to the printer, monitor real-time status, and receive alerts.

6. Konserwacja

Regularna konserwacja gwarantuje długowieczność i optymalną wydajność Twojej drukarki 3D.

• Czysta płyta konstrukcyjna: After each print, allow the build plate to cool and gently remove any remaining filament or adhesive residue. Use isopropyl alcohol for thorough cleaning.
• Czyszczenie dysz: Periodically clean the nozzle using the provided nozzle cleaner to prevent clogs. For persistent clogs, a cold pull or hotend disassembly may be required.
• Smarowanie ruchomych części: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screws and linear rails every few months, or as needed, to ensure smooth movement.
• Sprawdź paski: Inspect the X and Y-axis belts for proper tension. They should be taut but not overly tight. Adjust if necessary.
• Aktualizacje oprogramowania układowego: Regularly check the Creality official website for firmware updates to ensure your printer has the latest features and bug fixes.

7. Rozwiązywanie Problemów

Typowe problemy i ich rozwiązania:

• Wydruk nie przykleja się do łóżka:
  • Ensure the build plate is clean and free of grease.
  • Verify bed leveling. Re-run the auto-leveling process.
  • Adjust initial layer height and print speed in your slicer software.
  • Increase bed temperature slightly for better adhesion.
• Zatykanie włókien:
  • Check for debris in the nozzle; use the nozzle cleaner.
  • Upewnij się, że filament nie splątał się na szpuli.
  • Verify correct printing temperature for your filament type.
  • Check the PTFE tube for kinks or blockages.
• Przesunięcie warstw:
  • Inspect X and Y-axis belts for looseness; tighten if necessary.
  • Aby zapobiec drganiom, należy ustawić drukarkę na stabilnej powierzchni.
  • Zmniejsz prędkość drukowania, zwłaszcza w przypadku skomplikowanych geometrii.
• Poor Print Quality (Stringing, Blobs):
  • Adjust retraction settings in your slicer.
  • Ensure filament is dry; moist filament can cause issues.
  • Optimize print temperature.

8. Specyfikacje

9. Gwarancja i wsparcie

Comgrow offers comprehensive support and protection plans for your Creality Ender 5 Max 3D Printer.

9.1 Plany ochrony

• 3-letni plan ochrony: Dostępna za 78.99 USD (płatność jednorazowa).
• 4-letni plan ochrony: Dostępna za 104.99 USD (płatność jednorazowa).
• Pełna ochrona: Obejmuje wszystkie kwalifikujące się zakupy dokonane w przeszłości i w przyszłości za 16.99 USD/miesiąc.

9.2 Zwroty i obsługa klienta

• 30-day Easy Returns: Enjoy a 30-day return policy for refunds or replacements.
• Obsługa klienta: For any inquiries or assistance, please contact Comgrow customer support.