Instrukcja obsługi timera zraszacza Diivoo 4 Zone

Wstęp

Thank you for choosing the Diivoo 4 Zone Sprinkler Timer. This programmable automatic irrigation timer is designed to simplify your garden watering, offering independent control over four separate zones. With features like rain delay and manual watering modes, it provides flexibility and efficiency for your lawn, yard, and pool watering needs. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.

Informacje dotyczące bezpieczeństwa

• Do not immerse the timer in water. The unit is IP54 rated for water resistance, but not submersion.
• Use only 2 AA 1.5V alkaline batteries. Do not mix old and new batteries, or different types of batteries.
• Sprawdź, czy wszystkie połączenia są szczelne, aby zapobiec wyciekom.
• Operate within recommended water pressure limits to avoid damage.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Protect from freezing temperatures. Remove batteries and store indoors during winter.

Produkt ponadview

Komponenty

Rycina 1: Przód view of the Diivoo 4 Zone Sprinkler Timer, showing the large LCD display, control buttons, and four hose outlets.

• Jednostka główna: Houses the control panel, LCD display, and battery compartment.
• Złącze wlotowe: Connects to your outdoor faucet (standard 3/4" garden hose thread). Features reinforced nylon fiber for durability.
• Four Outlet Connectors: Each outlet can be connected to a separate hose or irrigation line.
• Przyciski sterujące: For navigation and setting adjustments (OK, ESC/OFF, +, -, DELAY).
• Wyświetlacz LCD: Large screen showing current time, program settings for each zone (A, B, C, D), and status indicators.

Główne cechy

• 4 Independent Watering Zones: Allows separate scheduling for different areas.
• Programowalne harmonogramy: Set start time, watering duration (1s-360min), and frequency (every 1 min to 24 hrs, or every day to every 15 days).
• Funkcja opóźnienia deszczu: Skip watering cycles to conserve water during rainy periods.
• Ręczny tryb nawadniania: Initiate immediate watering without affecting programmed schedules.
• Duży wyświetlacz LCD: 3.2 x 2 inch screen for easy readability and quick operation.
• Wodoodporność IP54: Trwałe i nadające się do stosowania na zewnątrz.
• Niskie zużycie energii: Battery life up to 6-8 months with 2 AA batteries (not included).
• Zabezpieczenie przed niskim poborem mocy: Valve automatically shuts off when battery is too low to prevent water waste.

Organizować coś

1. Instalacja baterii

The timer requires 2 AA 1.5V alkaline batteries (not included).

1. Znajdź komorę baterii z tyłu timera.
2. Odsuń pokrywę baterii.
3. Włóż dwie nowe baterie alkaliczne AA, zwracając uwagę na prawidłową biegunowość (+/-).
4. Close the battery cover securely. The battery cover has a seal to isolate moisture.

Figure 2: Image showing the battery compartment and reinforced nylon fiber connection, highlighting the leakproof design.

2. Connecting the Timer

1. Upewnij się, że zewnętrzny kran jest zakręcony.
2. Screw the timer's inlet connector onto any standard 3/4" garden outdoor faucet. Hand-tighten only. Do not overtighten.
3. Connect your garden hoses to the four independent outlets (A, B, C, D) at the bottom of the timer.
4. Turn on your outdoor faucet. The timer is designed to withstand typical household water pressure.

Instrukcja obsługi

Understanding the LCD Display and Controls

Figure 3: Close-up of the large LCD screen and the 7-button quick setup panel.

The large LCD display shows various information including the current time, battery level, active zone indicators (A, B, C, D), start time, watering duration, watering frequency, and next start time. The control panel features buttons for navigation and setting adjustments:

• OK: Confirm selection or enter setting mode.
• ESC/WYŁ: Exit current setting, return to previous screen, or turn off the timer.
• +: Increase value or move forward in menu.
• -: Decrease value or move backward in menu.
• OPÓŹNIENIE: Activate/deactivate rain delay.
• NOW/ABCD: Switch between current time display and zone selection.

1. Ustawianie bieżącego czasu

1. Naciśnij OK button to enter setting mode. The time display will flash.
2. Użyj + or - Przyciski do ustawienia godziny. Naciśnij OK aby potwierdzić.
3. Adjust the minutes using + or -, następnie naciśnij OK aby potwierdzić.
4. Naciskać ESC aby wyjść z trybu ustawień.

2. Programming Automatic Watering Schedules (4 Zones)

The Diivoo timer allows you to set independent watering schedules for each of its four zones (A, B, C, D).

Figure 4: Visual representation of four independent irrigation zones (Zone 1, Zone 2, Zone 3, Zone 4) for customized watering.

Figure 5: Display showing options for setting Start Time, Watering Duration (1s to 360min), and Watering Frequency (Every 1H-23H or Every 1-15 Days).

1. Naciśnij NOW/ABCD button to select the desired zone (A, B, C, or D). The selected zone indicator will flash.
2. Naciskać OK to enter programming for the selected zone.
3. Ustaw czas rozpoczęcia: Używać + or - to adjust the hour and minutes for the watering start time. Press OK po każdej regulacji.
4. Set Watering Duration ("How Long"): Używać + or - Aby ustawić czas trwania podlewania od 1 sekundy do 360 minut, naciśnij OK aby potwierdzić.
5. Set Watering Frequency ("How Often"):
   • Używać + or - to select frequency in hours (e.g., every 1 hour to 23 hours). Press OK.
   • Alternatively, select frequency in days (e.g., every 1 day to 15 days). Press OK.
   • You can also set specific days of the week for watering. Navigate through the days and press OK to select/deselect.
6. After setting all parameters for the zone, press ESC to save and exit. Repeat for other zones as needed.

Notatka: Adequate water pressure is required when all 4 zone ports are operating simultaneously. If water pressure is insufficient, it is recommended to rotate the use of the 4 zone ports to avoid reduced water flow through each port.

3. Tryb podlewania ręcznego

Manual watering allows you to water immediately without interrupting your preset programs.

Figure 6: Illustration of manual watering in progress, showing the ability to set individual watering times for each zone from 1 second to 360 minutes.

1. Na ekranie głównym naciśnij OK button (water drop icon).
2. Używać + or - to select the desired watering duration (from 1 second to 360 minutes).
3. Naciskać OK to start manual watering. The selected zone(s) will begin watering immediately.
4. Aby zatrzymać ręczne podlewanie, naciśnij ESC/WYŁ.

4. Funkcja opóźnienia deszczu

The rain delay feature allows you to temporarily pause your watering schedule to avoid overwatering and save water during rainy conditions. The timer does not have a rain sensor, so you will need to activate this manually based on local weather forecasts.

Figure 7: Display showing the Rain Delay feature, indicating that the next watering schedule will be skipped. This feature aids in water conservation and allows for postponed schedules.

1. In the "ON" state (main display), press and hold the + przycisk przez 5 sekundy.
2. The "DELAY" icon will appear on the screen, and the "NEXT START" time will update to reflect the postponed schedule.
3. To deactivate rain delay, press and hold the + ponownie przez 5 sekund.

5. Przewodnik wideo po produkcie

Konserwacja

• Czyszczenie: Wyczyść minutnik za pomocą adamp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Wymiana baterii: Replace batteries when the low battery indicator appears on the LCD. It is recommended to replace batteries every 6-8 months or at the start of each watering season.
• Zimowanie: Before the first frost, remove the timer from the faucet. Remove the batteries. Store the timer indoors in a dry, protected area to prevent damage from freezing water.
• Czyszczenie filtra: Periodically check the filter washer inside the inlet connector for debris. Clean if necessary to ensure proper water flow.

Rozwiązywanie problemów

Specyfikacje

• Model: HCT-379
• Wymiary produktu: 6.46 x 5.59 x 2.99 cala
• Waga przedmiotu: 1.85 funta
• Źródło zasilania: 2 x AA 1.5V Alkaline Batteries (not included)
• Czas podlewania: 1 sekunda do 360 minut
• Częstotliwość podlewania: Every 1 minute to 24 hours, or Every 1 day to 15 days
• Wodoodporność: IP54
• Gwint wlotowy: Standard 3/4" Garden Hose Thread
• Liczba ustawień: 16

Gwarancja i wsparcie

Diivoo products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Diivoo 4 Zone Sprinkler Timer, please contact Diivoo customer service. Our team of experts is available to assist you.

Please refer to the contact information provided with your product packaging or visit the official Diivoo webna tej stronie znajdziesz najnowsze informacje dotyczące pomocy technicznej.

Diivoo Official Store: Diivoo Store on Amazon