1. Wprowadzenie
This user manual provides detailed instructions for the JNOEEDWN Multifunction Steering Wheel Control Switch, model 84250-60180. This product is designed as an aftermarket replacement part for compatible vehicles, enabling control over audio and Bluetooth functions directly from the steering wheel. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
1.1 Produkt powyżejview
The steering wheel control switch integrates various functions, including volume adjustment, mode selection, and Bluetooth audio controls. It is constructed from durable ABS plastic with a silver and black finish, designed for a direct fit replacement.

Figure 1: JNOEEDWN Steering Wheel Control Switch units and an example of installation on a steering wheel.
1.2 Zawartość opakowania
- 1x Left Steering Wheel Control Switch Unit (Model 84250-60180)
- 1x Right Steering Wheel Control Switch Unit (Model 84250-60180)
- Zintegrowana wiązka przewodów
2. Zgodność
This steering wheel control switch is compatible with the following vehicle models:
- Land Cruiser Prado KDJ150L (Model Years: 2010-2013)
- Land Cruiser Prado GRJ150L (Model Years: 2010-2013)
Important: Please verify that this product matches your vehicle's model and year before proceeding with installation. Refer to your vehicle's existing part number (e.g., 84250-60180 or 84250-60160) for confirmation.
3. Informacje dotyczące bezpieczeństwa
Podczas instalacji i obsługi należy przestrzegać następujących środków ostrożności:
- Zalecana profesjonalna instalacja: Due to the nature of automotive electrical systems and airbag components, professional installation by a qualified technician is highly recommended.
- Odłącz akumulator: Always disconnect the vehicle's negative battery terminal before beginning any electrical work to prevent accidental short circuits or airbag deployment.
- System poduszek powietrznych: Exercise extreme caution when working near the airbag system. Improper handling can lead to serious injury.
- Użycie narzędzia: Use appropriate tools for the task. Incorrect tools can damage components.
- Instrukcja obsługi pojazdu: Consult your vehicle's service manual for specific instructions regarding steering wheel and airbag removal.
4. Instalacja
This product is designed as a direct replacement for the original steering wheel control switches. The installation process typically involves removing the existing switches and connecting the new units. The following steps are general guidelines; specific procedures may vary by vehicle model. Refer to your vehicle's service manual for precise instructions.
4.1 Czynności przed instalacją
- Zaparkuj pojazd na równej powierzchni i zaciągnij hamulec postojowy.
- Wyłącz zapłon i wyjmij kluczyk.
- Disconnect the negative terminal of the vehicle's battery. Wait at least 10-15 minutes to allow the airbag system's backup power to dissipate.
- Carefully remove the airbag module from the steering wheel according to your vehicle's service manual.
- Disconnect the wiring harnesses from the existing steering wheel control switches.
4.2 Installing the New Switches
- Remove the old steering wheel control switches from their mounting points.
- Position the new JNOEEDWN control switches into the designated slots on the steering wheel. Ensure they fit securely.
- Connect the integrated wiring harness of the new switches to the corresponding connectors in the steering wheel. Ensure all connections are firm and correctly seated.

Rysunek 2: Tył view of the steering wheel control switches showing wiring connections.
4.3 Czynności po instalacji
- Reinstall the airbag module onto the steering wheel, ensuring all clips and fasteners are properly secured.
- Podłącz ponownie zacisk ujemny akumulatora pojazdu.
- Test the functionality of the new steering wheel controls.
5. Działanie
The JNOEEDWN Steering Wheel Control Switch provides convenient access to various audio and communication functions without removing your hands from the steering wheel. The controls are typically located on the left and right sides of the steering wheel.
5.1 Left-Side Controls (Audio/Mode)

Figure 3: Left-side control unit.
- Zwiększanie/zmniejszanie głośności (+ / -): Press to increase or decrease the audio volume.
- Track/Station Up/Down (^ / v): Press to change audio tracks, radio stations, or navigate menus.
- Sposób użycia: Press to cycle through audio sources (e.g., FM, AM, CD, Bluetooth Audio, USB).
- Mute/Hang Up (button with phone hang-up symbol): Press to mute audio or end a phone call.
5.2 Right-Side Controls (Bluetooth/Display)

Figure 4: Right-side control unit.
- Call Answer/Voice Command (button with phone answer symbol): Press to answer an incoming call or activate the vehicle's voice command system.
- WCHODZIĆ: Used for confirming selections in menus or display screens.
- Display/Menu Navigation (button with display screen symbol): Used to navigate through vehicle information displays or menus.
- Bluetooth Audio/Voice Command (button with Bluetooth symbol): May activate Bluetooth audio streaming or a specific voice command function.
Note: The exact functionality of each button may depend on your vehicle's specific audio system and trim level. Refer to your vehicle's owner's manual for detailed instructions on pairing Bluetooth devices and using the infotainment system.
6. Konserwacja
The JNOEEDWN Steering Wheel Control Switch requires minimal maintenance.
- Czyszczenie: Przetrzyj powierzchnię miękką, damp szmatką. Unikaj stosowania silnych środków chemicznych lub ściernych środków czyszczących, ponieważ mogą one uszkodzić plastikową powłokę.
- Kontrola: Okresowo sprawdzaj, czy nie występują luźne połączenia lub uszkodzenia fizyczne.
7. Rozwiązywanie Problemów
If you experience issues with your steering wheel control switch, consider the following:
- Elementy sterujące nie odpowiadają:
- Sprawdź, czy wszystkie połączenia przewodów są solidne i prawidłowo osadzone.
- Check the vehicle's fuses related to the audio system or steering wheel controls.
- Verify compatibility with your specific vehicle model and year.
- Przerywana funkcjonalność:
- Sprawdź, czy okablowanie nie nosi śladów uszkodzeń lub luźnych połączeń.
- Ensure the switches are correctly installed and not obstructed.
Jeśli podjęcie prób rozwiązania problemu nie przyniesie rezultatu, zaleca się konsultację z profesjonalnym mechanikiem samochodowym.
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | 84250-60180 |
| Tworzywo | Tworzywo ABS |
| Kolor | Silver with Black buttons |
| Waga przedmiotu | 1.76 uncji (około 50 gramów) |
| Wymiary opakowania | 1.18 x 0.79 x 0.39 cale (w przybliżeniu) |
| Zgodność | Land Cruiser Prado KDJ150L GRJ150L (2010-2013) |
9. Gwarancja i wsparcie
Aby uzyskać informacje o gwarancji lub pomocy technicznej, skontaktuj się z producentem lub punktem sprzedaży. Zachowaj paragon jako dowód zakupu.