ATAK REKINA X3

Instrukcja obsługi lekkiej bezprzewodowej myszy gamingowej ATTACK SHARK X3

Model: X3

Wstęp

The ATTACK SHARK X3 is a lightweight wireless gaming mouse designed for precision and versatility. It features a Pixart PAW3395 optical sensor, Kailh GM8.0 switches, and tri-mode connectivity (2.4G wireless, Bluetooth, and USB-C wired). This manual provides essential information for optimal use and maintenance of your device.

Lekka bezprzewodowa mysz gamingowa ATTACK SHARK X3

Image: The ATTACK SHARK X3 mouse in orange, showcasing its ultra-lightweight design, tri-mode connectivity, PixArt PAW3395 sensor, up to 26000 DPI, and Kailh GM8.0 switches.

Zawartość opakowania

Upewnij się, że w przesyłce znajdują się wszystkie elementy:

  • Bezprzewodowa mysz do gier ATTACK SHARK X3
  • Kabel do transmisji danych USB-C
  • Odbiornik USB 2.4G (przechowywany w myszy)
  • Instrukcja obsługi (ten dokument)

Produkt ponadview

Familiarize yourself with the mouse components:

ATTACK SHARK X3 Product Parameter Diagram

Image: Diagram illustrating the components of the ATTACK SHARK X3 mouse, including the Left Button, Right Button, Middle Button (scroll wheel), Type-C Port, 2.4G-OFF-BT switch, DPI Indicator Light, DPI Button, Receiver Organizer, Forward Button, and Backward Button. Mouse dimensions are also shown: 118.5mm length, 61mm width, 39.7mm height.

  • Przyciski w lewo/w prawo: Standardowe funkcje kliknięcia myszą.
  • Środkowy przycisk (kółko przewijania): Scrolling and middle-click function.
  • Przyciski do przodu/do tyłu: Side buttons for navigation, programmable via driver.
  • Przycisk DPI: Dostosowuje czułość myszy (DPI).
  • DPI Indicator Light: Shows the current DPI setting.
  • Mode Switch Button (2.4G/OFF/BT): Selects the connection mode.
  • Kontrolka trybu: Indicates the active connection mode.
  • Port USB-C: Do przewodowego połączenia i ładowania.
  • USB Receiver Organizer: Schowek na odbiornik USB 2.4G.

Organizować coś

1. Podłączanie myszy

The ATTACK SHARK X3 supports three connection modes:

ATTACK SHARK X3 Flashspeed Connectivity

Image: Underside of the ATTACK SHARK X3 mouse showing the 2.4G/OFF/BT switch and the USB receiver slot. Text highlights Performance Mode (2.4GHz), Efficiency Mode (Bluetooth 5.0), and Wired USB-C Mode.

Tryb bezprzewodowy 2.4G:

  1. Znajdź odbiornik USB 2.4G znajdujący się w schowku na spodzie myszy.
  2. Podłącz odbiornik USB do dostępnego portu USB w komputerze.
  3. Przesuń przełącznik trybu znajdujący się na spodzie myszy na pozycję „2.4G”.
  4. Mysz powinna połączyć się automatycznie.

Tryb Bluetooth:

  1. Przesuń przełącznik trybu znajdujący się na spodzie myszy na pozycję „BT”.
  2. Na komputerze lub urządzeniu otwórz ustawienia Bluetooth i wyszukaj nowe urządzenia.
  3. Z listy dostępnych urządzeń wybierz „ATTACK SHARK X3”, aby je sparować.
  4. Notatka: The mouse can connect to up to 4 devices simultaneously in Bluetooth mode. Short press the mode switching key to switch between BT channels. Press and hold for 3 seconds for code pairing.

Tryb przewodowy USB-C:

  1. Connect the provided USB-C data cable to the mouse's USB-C port.
  2. Podłącz drugi koniec kabla do wolnego portu USB w komputerze.
  3. Mysz będzie działać jak mysz przewodowa i jednocześnie się ładować.

2. Instalacja sterownika (opcjonalnie)

To customize the 5 programmable buttons, DPI settings, polling rate, LOD (Lift-Off Distance), and macros, download the official ATTACK SHARK X3 driver from the manufacturer's website. The driver allows for advanced configuration and saving profiles directly to the mouse's memory.

Notatka: For macOS users, initial settings may need to be configured on a Windows PC or virtual machine, as the settings are saved to the mouse's internal memory.

ATTACK SHARK X3 Macro Drivers Software Interface

Image: Screenshot of the ATTACK SHARK X3 driver software interface, showing options for button settings, DPI adjustment, polling rate, LOD, and macro customization.

Instrukcja obsługi

Regulacja DPI

The mouse features 6 adjustable DPI levels. Press the DPI button on the underside of the mouse to cycle through the preset DPI settings:

  • 800 DPI
  • 1600 DPI
  • 2400 DPI
  • 3200 DPI
  • 5000 DPI
  • Up to 26000 DPI (configurable via software)

The DPI indicator light will change color to reflect the current DPI setting.

Bateria i ładowanie

The ATTACK SHARK X3 mouse is equipped with a long-lasting battery, offering up to 200 hours of continuous use on a single charge. When the battery is low, the indicator light will signal. Connect the mouse using the USB-C cable to charge it. The mouse can be used while charging in wired mode.

Żywotność baterii ATTACK SHARK X3

Image: The ATTACK SHARK X3 mouse with text indicating "Play Longer, Charge Less" and "Run For Up To 200 Hours Of Continuous Game."

ATTACK SHARK X3 200 Hours Long-Lasting Power

Image: Graphic illustrating the 200-hour long-lasting battery life of the ATTACK SHARK X3 mouse, with a charging progress bar.

Konserwacja

Czyszczenie

Aby zachować optymalną wydajność i higienę, regularnie czyść mysz. Do przecierania powierzchni używaj miękkiej, suchej ściereczki. W przypadku uporczywych zabrudzeń, delikatnie przetrzyj powierzchnię.amp Można używać ściereczki z łagodnym mydłem, upewniając się, że płyn nie dostanie się do wnętrza myszy. Unikaj agresywnych środków chemicznych i materiałów ściernych.

PTFE Feet Care

The mouse features 100% virgin grade PTFE feet for smooth gliding. Keep the mouse feet clean and free from dust or debris to ensure consistent slide performance. Avoid scratching or damaging the PTFE feet, as this can affect tracking and movement.

ATTACK SHARK X3 PTFE Feet

Image: Underside of the ATTACK SHARK X3 mouse highlighting the 100% virgin grade PTFE feet, designed for consistent gliding.

Rozwiązywanie problemów

Jeśli masz problemy z myszą ATTACK SHARK X3, zapoznaj się z poniższymi typowymi rozwiązaniami:

  • Mysz nie odpowiada:
    • Upewnij się, że mysz jest naładowana. Podłącz ją kablem USB-C, aby naładować.
    • Check the mode switch on the bottom of the mouse. Ensure it is set to the correct mode (2.4G or BT).
    • For 2.4G mode, ensure the USB receiver is securely plugged into your computer.
    • For Bluetooth mode, verify that Bluetooth is enabled on your device and the mouse is paired. Try re-pairing if necessary.
    • Jeśli używasz trybu przewodowego, upewnij się, że kabel USB-C jest prawidłowo podłączony do myszy i komputera.
  • Lag or Disconnections (Wireless Modes):
    • Move the mouse closer to the USB receiver (for 2.4G) or your Bluetooth device to reduce interference.
    • Ensure there are no large metallic objects or other wireless devices causing interference between the mouse and receiver/device.
    • Spróbuj podłączyć odbiornik 2.4G do innego portu USB.
    • If experiencing lag after waking from sleep (especially on macOS), try turning the mouse off and then back on.
  • Inconsistent Tracking or Movement:
    • Wyczyść czujnik optyczny znajdujący się na spodzie myszy miękką, suchą ściereczką.
    • Upewnij się, że używasz myszy na odpowiedniej powierzchni (np. podkładce pod mysz). Unikaj powierzchni silnie odbijających światło lub przezroczystych.
    • Check the DPI setting. Adjust it to a level that suits your preference.
  • Problemy z kółkiem przewijania:
    • Upewnij się, że kółko przewijania jest czyste i wolne od zanieczyszczeń.
    • Jeśli problem nadal występuje, może to oznaczać awarię sprzętu.
  • Buttons Not Responding or Double-Clicking:
    • Ensure the mouse driver software is up to date if you are using custom button assignments.
    • The Kailh GM8.0 switches are designed for durability; however, if issues arise, contact support.

Jeśli wykonanie tych czynności nie rozwiąże problemu, skontaktuj się z obsługą klienta ATTACK SHARK, aby uzyskać dalszą pomoc.

Specyfikacje

ModelX3
TransduktorCzujnik optyczny Pixart PAW3395
DPI (regulowane)800/1600/2400/3200/5000/26000
Śledzenie prędkości650 IPS
Przyśpieszenie50G
Współczynnik sondowania1000 Hz
PrzełącznikiMikroprzełączniki Kailh GM8.0 (80 milionów kliknięć)
KoderKoder kółka przewijania TTC
ŁącznośćŁączność bezprzewodowa 2.4G, Bluetooth 5.2, przewodowy port USB-C
Żywotność bateriiDo 200 godzin (ciągłe użytkowanie)
Waga49 g (w przybliżeniu)
Wymiary (dł. x szer. x wys.)Wymiary: 118.5 x 61 x 39.7 mm
Programowalne przyciski5
ATTACK SHARK X3 Pixart PAW3395 Sensor

Image: Close-up of the Pixart PAW3395 flagship optical sensor, highlighting its precision and speed with specifications like 50G acceleration, 26,000 DPI, and 650 IPS.

ATTACK SHARK X3 Kailh GM8.0 Switches and TTC Encoder

Obraz: Wewnętrzny view of the ATTACK SHARK X3 mouse, showing the Kailh GM8.0 switches and TTC encoder, emphasizing 80 million clicks lifespan and well-defined scroll steps.

Oficjalny film o produkcie

Wideo: Oficjalny film prezentujący produktasing the features and design of the ATTACK SHARK X3 Lightweight Wireless Gaming Mouse, including its sensor, switches, and connectivity options.

Gwarancja i wsparcie

ATTACK SHARK products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ATTACK SHARK webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

For additional resources and driver downloads, visit the official ATTACK SHARK webstrona: Sklep ATTACK SHARK

© 2026 ATTACK SHARK. Wszelkie prawa zastrzeżone.