Instrukcja obsługi automatycznego robota do mycia okien LIECTROUX HCR10

Produkt ponadview

The LIECTROUX HCR10 is an intelligent automatic window cleaning robot designed to simplify window maintenance. It features a powerful integrated suction motor providing 2800Pa of suction, allowing it to adhere securely to vertical glass surfaces. Equipped with dual spiral cleaning heads and microfiber cloths, it effectively cleans various glass types, windows, tiles, and glass floors, including hard-to-reach areas like high-rise building windows.

This robot incorporates intelligent AI technology for automatic detection of window frames and obstacles, adjusting its cleaning path accordingly. It offers three automatic cleaning modes and can be controlled via a remote, enabling comprehensive window cleaning with minimal effort.

Image: The LIECTROUX HCR10 robot cleaner with its remote control, illustrating its compact design and operational interface.

Image: Illustration of the robot's high-density fiber cleaning cloths, effective against dust, bacteria, dirt, oil, water stains, and guano.

Informacje dotyczące bezpieczeństwa

For safe operation, the window cleaning robot must remain plugged into a power source during use. It is equipped with an integrated UPS (Uninterrupted Power System) battery that provides an additional 25 minutes of suction protection in case of a power outage, preventing the robot from falling and triggering an alarm. A professional 4-meter safety rope and a 5.2-meter adapter cord are included to ensure maximum safety, eliminating the need for dangerous ladders to clean high windows.

Image: Diagram showing the robot's power connection and the 20-minute power-off protection feature, highlighting the 4m safety rope and 1.5m power cord.

Zawartość opakowania

Po rozpakowaniu sprawdź, czy wszystkie elementy są obecne i w dobrym stanie:

• LIECTROUX Window Cleaning Robot
• Washable Cleaning Cloths (10 pieces)
• Cleaning Cloth Holders (4 pieces)
• Butelka na wodę
• Zdalne sterowanie
• Zasilacz
• Przewód przedłużający
• Lina bezpieczeństwa
• Instrukcja obsługi

Image: Visual representation of all items included in the LIECTROUX HCR10 robot cleaner package.

Organizować coś

1. Naładuj robota: Before first use, ensure the robot's internal UPS battery is sufficiently charged. Connect the power adapter to the robot and a power outlet.
2. Załóż gąbki czyszczące: Securely attach the clean microfiber cleaning pads to the robot's cleaning heads. Ensure they are properly aligned and fastened.
3. Podłącz linę bezpieczeństwa: Always attach the safety rope to a sturdy anchor point indoors before placing the robot on the window. This is crucial for preventing falls.
4. Napełnij zbiornik na wodę: If using the water spray function, fill the integrated water tank with clean water or a recommended window cleaning solution using the provided water bottle.
5. Podłącz zasilanie: Plug the robot's power cord into a grounded electrical outlet. The robot requires continuous power for operation.

Instrukcja obsługi

1. Włączanie: Place the robot on the glass surface you wish to clean. Press the power button on the robot or the remote control to activate it. The robot will create suction and adhere to the surface.
2. Wybierz tryb czyszczenia: Use the remote control to select one of the three automatic cleaning modes (e.g., Z-path, N-path, or a combination). The robot will intelligently detect edges and obstacles to navigate the surface.
3. Aktywuj spryskiwacz wodny: If desired, use the remote control to activate the ultrasonic water spray function. This helps to loosen dirt and stains for more effective cleaning.
4. Monitoruj postęp: Allow the robot to complete its cleaning cycle. It will typically return to its starting point or stop once the area is clean.
5. Wyłączone: Once cleaning is complete, power off the robot and carefully remove it from the surface.

Image: Illustration of the three freely modifiable cleaning modes: top-to-bottom, left-to-right, and right-to-left, controlled by the remote.

Obraz: Zbliżenie view of the robot's ultrasonic water spray nozzle, demonstrating its fine mist application for effective cleaning.

Konserwacja

• Clean Microfiber Pads: After each use, remove the microfiber cleaning pads and wash them. They can be hand-washed or machine-washed with mild detergent. Ensure they are completely dry before reattaching for next use.
• Clean Water Nozzle: Regularly check and clean the ultrasonic water spray nozzle to prevent clogging. Use a soft brush or cloth to gently wipe away any residue.
• Robot czyszczący: Use a soft, dry cloth to wipe the exterior of the robot, removing any dust or debris.
• Przechowuj prawidłowo: Gdy robota i jego akcesoria nie są używane, należy je przechowywać w czystym i suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.

Rozwiązywanie problemów

If you encounter issues with your LIECTROUX HCR10 robot, please refer to the following common problems and solutions:

• Robot not adhering or falling:
  • Ensure the power cord is securely plugged in and the robot is receiving continuous power.
  • Check if the suction motor is obstructed or if the suction cups are dirty. Clean them if necessary.
  • Verify that the surface is clean and free of excessive dust or moisture that could reduce suction.
  • Ensure the safety rope is always attached to a secure point.
• Robot leaving streaks or not cleaning effectively:
  • Replace or thoroughly clean the microfiber cleaning pads. Dirty pads can leave streaks.
  • Ensure the water tank is filled and the spray nozzle is not clogged.
  • For heavily soiled windows, a pre-cleaning or manual wipe may be necessary before using the robot.
  • Consider adding a small amount of recommended window cleaning solution to the water tank.
• Robot nie porusza się lub porusza się nieregularnie:
  • Check for any obstructions on the window surface or around the robot's wheels/tracks.
  • Sprawdź, czy baterie w pilocie zdalnego sterowania nie są rozładowane.
  • If the robot stops mid-cycle, check the power connection. The UPS battery provides temporary power but is not for continuous operation.

Specyfikacje

Gwarancja i wsparcie

This product is typically eligible for a 30-day return policy for refund or replacement. For specific warranty details, technical support, or any product-related inquiries, please contact the seller directly. The seller for this product is LIECTROUX ROBOTICS SA.

For further assistance, please refer to the contact information provided at the point of purchase or on the official LIECTROUX webstrona.