Siamp Dual Flush Mechanism for Built-in Toilet Frames (Model 10005508)

1. Wprowadzenie

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Siamp Dual Flush Mechanism, Model 10005508. This mechanism is designed for use with Siamp ACTUA 2 to 7, ISIS, SAPHIR & AIGUE MARINE, and SENSEA REMIX, NEO, THEIA & TUTTI built-in toilet frames. Please read this manual carefully before installation and use to ensure proper function and longevity of the product.

2. Informacje dotyczące bezpieczeństwa

Zawsze przestrzegaj następujących środków ostrożności:

• Ensure the water supply to the toilet is turned off before beginning any installation or maintenance.
• Wear appropriate personal protective equipment (e.g., gloves, eye protection) if necessary.
• Jeśli masz jakiekolwiek wątpliwości, skonsultuj się z wykwalifikowanym hydraulikiem.
• Przechowywać małe części w miejscu niedostępnym dla dzieci.

3. Składniki produktu

The Siamp Dual Flush Mechanism consists of the following main parts:

• Dual flush valve body
• Adjustable overflow tube
• Dual push-button activation system (may be integrated or separate depending on frame)
• Uszczelka
• Nakrętka montażowa

Rysunek 1: Nadview of the Siamp Dual Flush Mechanism. This image displays the main body of the flush mechanism, including the adjustable overflow tube, the stirrup-type activation arms, and the base with its sealing components. The mechanism is primarily white plastic with some grey components.

4. Instrukcje instalacji

Follow these steps for proper installation of the flush mechanism:

1. Prepare the Toilet Cistern: Ensure the cistern is clean and free of debris. Turn off the water supply and drain any remaining water.
2. Remove Old Mechanism (if applicable): Unscrew the mounting nut from the underside of the cistern and carefully remove the old flush mechanism. Clean the opening thoroughly.
3. Install New Mechanism:
   • Place the sealing gasket onto the base of the new Siamp mechanizm.
   • Insert the mechanism into the cistern's flush opening from the inside.
   • From the underside of the cistern, thread and tighten the mounting nut securely. Do not overtighten, as this can damage the mechanism or cistern.
4. Adjust Overflow Tube: The overflow tube height should be set approximately 1 cm below the overflow level of the cistern. Adjust by sliding the upper part of the tube to the desired height.
5. Connect Activation: Connect the dual push-button activation system (not included, typically part of the toilet frame) to the stirrup arms of the flush mechanism. Ensure both full flush (6L) and reduced flush (3L) functions are correctly aligned and operate smoothly.
6. Funkcjonalność testu: Turn on the water supply and allow the cistern to fill. Perform several full and reduced flushes to check for leaks and proper operation. Adjust the push-button connections if necessary for optimal performance.

5. Instrukcja obsługi

This Siamp mechanism features a dual-volume flush system for water conservation:

• Pełne spłukiwanie (6 litrów): Press the larger button or the full flush side of the dual push-button. This releases approximately 6 liters of water for solid waste.
• Reduced Flush (3 Liters): Press the smaller button or the reduced flush side of the dual push-button. This releases approximately 3 liters of water for liquid waste, saving water.

Ensure the buttons are fully depressed and released for complete flushing cycles.

6. Konserwacja i pielęgnacja

Regular maintenance helps ensure the longevity and efficient operation of your flush mechanism:

• Czyszczenie: Periodically clean the mechanism components, especially the sealing gasket and the base, to prevent mineral buildup. Use a soft brush and mild, non-abrasive cleaning agents.
• Kontrola: Inspect the sealing gasket for wear or damage. If water continuously runs into the toilet bowl, the gasket may need cleaning or replacement.
• Unikaj silnych środków chemicznych: Do not use harsh chemical cleaners, as they can damage plastic components and rubber seals.

7. Rozwiązywanie Problemów

Oto rozwiązania typowych problemów, z którymi możesz się spotkać:

8. Specyfikacje

9. Informacje o gwarancji

This product is covered by the standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For specific warranty terms and conditions, refer to the documentation provided at the point of purchase or contact Siamp obsługa klienta.

10. Obsługa klienta

If you require further assistance, have questions about installation, or need to report a problem, please contact Siamp obsługa klienta za pośrednictwem ich oficjalnej strony webSkontaktuj się z witryną lub sprzedawcą, u którego produkt został zakupiony. Przygotuj numer modelu (10005508) i dowód zakupu.