Zippo Heatbank 9s

Instrukcja obsługi ogrzewacza do rąk Zippo Heatbank 9s z akumulatorem

Model: Heatbank 9s

1. Wprowadzenie

Thank you for choosing the Zippo Heatbank 9s Rechargeable Hand Warmer. This device provides reliable warmth and also functions as a portable power bank for your USB-compatible devices. Please read this manual thoroughly before use to ensure proper operation and safety.

Zippo Heatbank 9s Rechargeable Hand Warmer, front view

Rycina 1: Przód view of the Zippo Heatbank 9s Rechargeable Hand Warmer.

2. Koniec produktuview

The Zippo Heatbank 9s is designed for comfort and utility in cold conditions. It features a durable aluminum housing and an ergonomic design for easy handling. Key features include:

  • Dual-sided heat output up to 120°F / 50°C.
  • Six (6) adjustable heat settings.
  • Integrated 5200 mAh lithium-ion battery for up to 9 hours of warmth.
  • Functions as a power bank to charge USB-compatible devices.
  • Battery and heat indicator lights.
  • Includes a lanyard and charging cord.
Zippo Heatbank 9s Rechargeable Hand Warmer, back view z informacjami o produkcie

Rysunek 2: Tył view of the Zippo Heatbank 9s, showing model and capacity details.

Zippo Heatbank 9s Rechargeable Hand Warmer, close-up of ports and indicator lights

Figure 3: Close-up of the charging ports and indicator lights on the Heatbank 9s.

3. Konfiguracja

3.1 Pierwsze ładowanie

Before first use, fully charge your Zippo Heatbank 9s. Connect the included USB charging cable to the micro-USB input port on the device and to a USB power source (e.g., computer, wall adapter). The blue indicator lights will flash during charging and remain solid when fully charged.

3.2 Mocowanie smyczy

The Heatbank 9s comes with a lanyard for convenient carrying. Thread the loop of the lanyard through the designated hole at the top of the device and secure it as desired.

Zippo Heatbank 9s Rechargeable Hand Warmer with included lanyard and charging cable

Figure 4: The Zippo Heatbank 9s with its included lanyard and USB charging cable.

4. Instrukcja obsługi

4.1 Włączanie/wyłączanie zasilania

To turn on the hand warmer function, press and hold the power button for approximately 3 seconds. The indicator lights will illuminate.

To turn off the hand warmer function, press and hold the power button for approximately 3 seconds until the lights turn off.

4.2 Sprawdzanie poziomu baterii

Press the power button quickly (do not hold) to check the current battery level. The blue indicator lights will show the charge status.

4.3 Regulacja ustawień grzania

Once the hand warmer is on, short press the power button to cycle through the heat settings:

  • Niebieskie światła: Indicate dual-sided heating. There are three intensity levels within this mode.
  • Zielone światła: Indicate single-sided heating. There are three intensity levels within this mode.

The device will reach its maximum temperature of 120°F / 50°C on the highest setting.

5. Ładowanie urządzeń zewnętrznych

The Zippo Heatbank 9s can also charge other USB-compatible devices. Connect your device's charging cable to the USB-A output port on the Heatbank 9s. The blue indicator lights will show the remaining battery capacity. Note that the heating function is disabled when the device is actively charging an external device.

6. Konserwacja

To ensure the longevity of your Zippo Heatbank 9s:

  • Utrzymuj urządzenie w czystości i suchości.
  • Unikaj ekstremalnych temperatur i bezpośredniego światła słonecznego.
  • Przechowywać w chłodnym i suchym miejscu, gdy nie jest używany.
  • Nie próbuj demontować ani modyfikować urządzenia.

7. Rozwiązywanie Problemów

7.1 Urządzenie nie nagrzewa się

  • Ensure the device is sufficiently charged. Check battery indicator lights.
  • Confirm the heating function is activated by pressing and holding the power button until lights illuminate.
  • If charging an external device, the heating function is temporarily disabled. Disconnect the external device.

7.2 Urządzenie nie ładuje się

  • Verify the charging cable is securely connected to both the Heatbank 9s micro-USB input and the power source.
  • Wypróbuj inny kabel ładujący USB lub inne źródło zasilania.
  • Upewnij się, że źródło zasilania jest aktywne.

8. Specyfikacje

FunkcjaSzczegół
Nazwa modeluHeatbank 9s
Numer części40652
Typ bateriiLitowo-jonowy
Pojemność baterii5200 mAh
Górna ocena temperatury120°F / 50°C
Ustawienia ciepła6 (3 dual-sided, 3 single-sided)
Czas trwaniaDo 9 godzin
TworzywoAluminium
Waga przedmiotu5.6 uncji
Wymiary produktu (DxSxW)2.38 x 0.95 x 4.88 cala
UPC191693406528

9. Oficjalny film o produkcie

Film 1: Krótki opis produktuview demonstrating the Zippo Heatbank 9s features and functionality.

10. Gwarancja i wsparcie

The Zippo Heatbank 9s comes with a 1-year warranty. For warranty claims or technical support, please refer to the contact information provided on the official Zippo webwitryny lub dokumentacji zakupu.

11. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Rak i szkodliwe działanie na układ rozrodczy – www.P65Warnings.ca.gov. KEEP OUT OF REACH OF CHILDREN. KEEP AWAY FROM FIRE OR TEMPERATURES ABOVE 120°F (49°C).