WAINLUX K6 Pro Laser Engraver Instruction Manual

Wstęp

This manual provides essential information for the safe and effective operation of your WAINLUX K6 Pro Laser Engraver. Please read it thoroughly before first use and keep it for future reference.

The WAINLUX K6 Pro is a portable 3000mW laser engraving machine designed for precision engraving on various materials such as cardboard, wood, leather, cloth, bamboo, plastic, and glass. It features Bluetooth and USB connectivity for versatile control.

Figure 1: WAINLUX K6 Pro Laser Engraver with various engraved samples including a glass, wooden ornaments, and a wooden block.

Środki ostrożności

• Ochrona oczu: Always wear appropriate laser safety glasses when operating the engraver. The built-in protective lenses reduce harmful blue light, but additional eye protection is recommended.
• Wentylacja: Operate the engraver in a well-ventilated area to dissipate smoke and fumes produced during engraving. The device has a built-in exhaust fan.
• Zgodność materiałów: Do not engrave materials containing PVC or other chlorine-based plastics, as they can release toxic fumes. Refer to the material compatibility section for details.
• Ochrona ruchu: The device features movement protection; if accidental movement is detected during operation, it will shut down immediately.
• Overheating Monitoring: The engraver monitors its internal temperature and will shut down if it approaches its heat threshold.
• Zgodność z FDA: The WAINLUX K6 laser engraving machine has passed CE, FCC, FDA certification. The FDA Accession Number is 2010047-000. It was tested according to IEC 60825-1. Protective housing outside is Class 1.

Zawartość opakowania

Po rozpakowaniu należy sprawdzić, czy wszystkie elementy są obecne i nieuszkodzone:

• WAINLUX K6 Pro Laser Engraver Unit
• Zasilacz
• Kabel USB
• USB Flash Disk (containing software and user manual)
• Laser Protective Panel
• Sample Paper and Wood materials
• Instrukcja obsługi (drukowana)

Figure 2: Included accessories: Paper/Wood samples, Laser Protective Panel, User Manual, USB Flash Disk, Power Adapter, and USB Cable.

Organizować coś

1. Połączenie początkowe

1. Place the engraver on a stable, flat surface in a well-ventilated area.
2. Connect the power adapter to the engraver and plug it into a power outlet.
3. Turn on the power switch located on the side of the engraver.
4. Connect the engraver to your computer via the provided USB cable, or prepare for Bluetooth connection.

2. Instalacja oprogramowania

The engraver supports Windows, Mac OS, iOS, and Android systems. Software is provided on the included USB flash disk.

1. Insert the USB flash disk into your computer.
2. Navigate to the appropriate folder for your operating system (e.g., "01_Windows" or "02_MAC").
3. Install the necessary drivers first, then proceed with the engraving software installation.

For mobile devices, download the official WAINLUX app from your device's app store. The app supports various file formats including JPEG/JPG/GIF/BMP/PNG.

Figure 3: The WAINLUX K6 Pro connected to a smartphone via Bluetooth, showing the app interface for design selection.

Instrukcja obsługi

1. Regulacja ogniskowej

Proper focal length adjustment is crucial for optimal engraving results. The laser projects a small dot; adjust the laser head until this dot is as tiny as possible on the material surface.

Figure 4: Close-up of the adjustable focus mechanism on the laser head, indicating 3000mW laser power.

2. Przygotowanie materiału

Ensure the material is clean and securely placed within the engraving area. For glass engraving, you must blacken the surface with a marker pen before carving to allow the laser to interact with the material.

Compatible materials include: Wood, Cardboard, Bamboo, Plastic, Acrylic, Leather, Glass (pre-treated), Lacquered metal.

Materiały, które nie mogę be engraved: Stainless steel, metal (unlacquered), aluminum, crystal, transparent or translucent materials (without pre-treatment).

Figure 5: Various materials suitable for engraving, including wood, cardboard, bamboo, plastic, acrylic, leather, and glass.

3. Proces grawerowania

1. Open the engraving software or mobile app.
2. Import your desired image or design (JPEG/JPG/GIF/BMP/PNG are supported).
3. Adjust engraving parameters such as carving power, speed, and contrast based on the material.
4. Use the "Preview" function to project the image outline onto the material, ensuring correct positioning.
5. Po zadowoleniu z preview, initiate the engraving process.

Figure 6: The K6 Pro actively engraving a design, showcasing the laser in action.

Konserwacja

• Czyszczenie: Regularly clean the laser lens and the engraving area to ensure optimal performance and prevent debris buildup. Use a soft, lint-free cloth.
• Wentylator: Ensure the built-in exhaust fan is clear of obstructions to maintain proper heat dissipation and smoke removal.
• Składowanie: Gdy nie używasz grawerki, przechowuj ją w suchym i wolnym od kurzu miejscu.

Rozwiązywanie problemów

Specyfikacje

• Model: K6-04
• Moc lasera: 3000mW
• Dokładność: 0.05mm
• Łączność: Bluetooth, USB
• Kompatybilny system operacyjny: Windows, Mac OS, iOS, Android
• Wymiary produktu: 6.77 x 6.77 x 6.37 cala
• Waga przedmiotu: 3.94 funta
• Ciągły czas pracy: 8 godziny
• Długość życia: Ponad 10000 XNUMX godzin
• Certyfikaty: CE, FCC, FDA (Accession Number: 2010047-000)

Figure 7: Diagram showing the dimensions of the WAINLUX K6 Pro: 172mm (width) x 172mm (depth) x 162mm (height), with an engraving area of 80mm x 80mm.

Gwarancja i wsparcie

WAINLUX provides professional customer service. For pre-sale consultation or any issues encountered, please refer to the support website mentioned in your product documentation or contact customer service directly.

The manufacturer is WAINLUX. For more information, visit the WAINLUX Store on Amazon.