Auriol AU1266
Bezprzewodowa stacja pogodowa Auriol
Model: AU1266
Wstęp
Thank you for choosing the Auriol Wireless Weather Station. This device provides accurate indoor and outdoor temperature readings, a radio-controlled clock with automatic time and date adjustments, and a convenient alarm function. Designed for ease of use, it can be placed on a table or mounted on a wall.
Zawartość opakowania
- 1x Auriol Wireless Weather Station (Main Unit)
- 1x Bezprzewodowy czujnik zewnętrzny
- 4x baterie alkaliczne
- Materiał montażowy
- Instrukcja obsługi (ten dokument)
Produkt ponadview
The Auriol Wireless Weather Station consists of a main display unit and a remote outdoor sensor. The main unit displays indoor and outdoor temperatures, time, date, and alarm settings. The outdoor sensor transmits temperature data wirelessly to the main unit.
Image: Auriol Wireless Weather Station main unit (right) and its accompanying outdoor sensor (left). The main unit features a large digital display showing time, date, and indoor/outdoor temperatures. The outdoor sensor is a compact black unit.
Organizować coś
1. Instalacja baterii
- Open the battery compartment on the back of both the main unit and the outdoor sensor.
- Insert the supplied alkaline batteries, ensuring correct polarity (+/-).
- Dokładnie zamknij komory baterii.
2. Parowanie czujników
The main unit and outdoor sensor should automatically pair upon battery installation. If pairing does not occur, or if the outdoor temperature is not displayed:
- Ensure both units are within range (up to 30m in open field).
- Press the 'RESET' button (if available) on both units, or remove and reinsert batteries.
3. Umieszczenie
- Jednostka główna: Place indoors on a flat surface or mount on a wall using the integrated hanging hole. Avoid direct sunlight or heat sources.
- Czujnik zewnętrzny: Place outdoors in a shaded, dry location, protected from direct rain and sunlight. Ensure it is within the 30m wireless range of the main unit. The sensor is IPX4 splash-proof, but prolonged exposure to heavy rain is not recommended.
Instrukcja obsługi
Radio-Controlled Time and Date
The weather station features a radio-controlled clock that automatically sets the time and date, including adjustments for summer and winter time (Daylight Saving Time). Ensure the unit is placed where it can receive a clear radio signal.
Temperature Display (°C / °F)
The display shows both indoor and outdoor temperatures. To switch between Celsius (°C) and Fahrenheit (°F), locate the dedicated button (often labeled 'C/F' or similar) on the main unit and press it.
Funkcja alarmu
The unit supports two separately adjustable alarm times with a snooze function.
- Ustawianie alarmu: Refer to the specific buttons on your device (e.g., 'ALARM', 'SET', 'MODE') to enter alarm setting mode. Use '+' and '-' buttons to adjust the hour and minute.
- Aktywacja/Dezaktywacja alarmu: Press the 'ALARM ON/OFF' button to toggle the alarm. An alarm icon will appear on the display when active.
- Funkcja drzemki: When the alarm sounds, press the 'SNOOZE' button (often a large button on top) to temporarily silence the alarm for a few minutes. The alarm will sound again after the snooze period.
Wskaźnik poziomu naładowania baterii
The display includes an indicator for the battery level of both the main station and the outdoor sensor. Replace batteries promptly when the indicator shows low power to ensure continuous operation and accurate readings.
Konserwacja
- Czyszczenie: Przetrzyj urządzenia miękką, suchą ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani rozpuszczalników.
- Wymiana baterii: Replace all batteries at the same time with new alkaline batteries of the specified type. Do not mix old and new batteries or different battery types.
- Składowanie: Jeśli urządzenie będzie przechowywane przez dłuższy czas, należy wyjąć wszystkie baterie, aby zapobiec wyciekowi.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| No outdoor temperature display | Sensor out of range, low sensor battery, interference, pairing issue. | Move sensor closer to main unit. Replace sensor batteries. Re-pair units (see Setup). Avoid placing near large metal objects or electronics. |
| Nieprawidłowa godzina/data | Słaby odbiór sygnału radiowego. | Relocate the main unit to an area with better radio signal reception, away from electronic devices that may cause interference. Allow time for automatic synchronization. |
| Wyświetlacz jest przyciemniony lub pusty | Niski poziom naładowania baterii jednostki głównej. | Wymień baterie jednostki głównej. |
| Alarm nie włącza się | Alarm not activated, incorrect alarm time set. | Ensure alarm is set and activated (check alarm icon on display). Verify alarm time is correct. |
Specyfikacje
- Model: AU1266
- Wymiary jednostki głównej: Approx. 10 cm x 10 cm x 2 cm (L x H x D)
- Outdoor Sensor Dimensions: Approx. 5 cm x 11 cm x 3 cm (L x H x D)
- Zasięg czujnika zewnętrznego: Up to 30 m (in open field)
- Outdoor Sensor Rating: IPX4 (bryzgoszczelny)
- Wyświetlacz temperatury: ° C / ° F
- Zegar: Radio-controlled, 12/24 hour format
- Alarm: 2 adjustable alarm times with snooze function
- Zasilanie: 4x Alkaline Batteries (included)
- Typ montażu: Tabletop or Wall-mount
Informacje o gwarancji
This Auriol product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact customer support for detailed terms and conditions. Keep your purchase receipt as proof of purchase.
Obsługa klienta
For technical assistance, troubleshooting, or warranty claims, please contact Auriol customer support. Contact details can typically be found on the product packaging or the official Auriol website. Please have your model number (AU1266) and purchase details ready when contacting support.