TELLUR Dash Patrol DC2 Car Camera User Manual

1. Wprowadzenie

The TELLUR Dash Patrol DC2 is a Full HD 1080P car camera designed to record your driving journeys and provide enhanced security for your vehicle. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it carefully before use.

2. Zawartość opakowania

Sprawdź, czy wszystkie przedmioty znajdują się na miejscu i są w dobrym stanie po rozpakowaniu.

• TELLUR Dash Patrol DC2 Car Camera
• Car Mount (Magnetic)
• Kabel USB
• Ładowarka samochodowa

Obraz: Wybuchowy view of the Dash Patrol DC2 showing the camera, magnetic mount, and key features like GPS, Magnetic Charging, Wi-Fi, and Full HD recording.

3. Koniec produktuview

Familiarize yourself with the components of your Dash Patrol DC2 camera.

Obraz: Przód view of the Dash Patrol DC2, highlighting the camera lens.

Obraz: Bok view of the Dash Patrol DC2, showing the TF card slot, microphone, and 'M' button.

Obraz: Tył view of the Dash Patrol DC2, displaying the screen, navigation buttons, USB port, Reset button, and Power button.

Kluczowe komponenty:

• Obiektyw aparatu: Przechwytuje wideo footage.
• Ekran wyświetlacza 2.7 cala: Dla viewna żywotage, odtwarzanie i nawigacja po menu.
• Gniazdo karty TF: Insert MicroSD card for storage.
• Mikrofon: Records audio (can be disabled in settings).
• Przycisk „M”: Mode button to switch between video, photo, and playback modes.
• Przyciski nawigacyjne (w górę/w dół): For menu navigation and specific functions.
• Przycisk OK: Potwierdza wybór i rozpoczyna/zatrzymuje nagrywanie.
• Przycisk zasilania: Włącza/wyłącza urządzenie.
• Przycisk resetowania: For factory reset (use a thin object to press).
• Port USB: Do zasilania i przesyłu danych.
• Magnetic Mount Connector: For attaching the camera to the car mount.

4. Konfiguracja

4.1 Instalowanie karty MicroSD

1. Sprawdź, czy kamera jest wyłączona.
2. Insert a Class 10 or higher MicroSD card (up to 64GB, not included) into the TF card slot until it clicks into place.
3. Aby wyjąć kartę, delikatnie naciśnij ją, aż wyskoczy.

4.2 Montaż kamery

1. Wyczyść obszar na przedniej szybie samochodu, w którym zamierzasz zamontować kamerę.
2. Attach the magnetic car mount to the windshield using its adhesive or suction cup. Ensure it does not obstruct your view.
3. Align the camera with the magnetic connector on the mount until it securely attaches.
4. Dostosuj kąt kamery, aby zapewnić wyraźny obraz view drogi przed nami.

Image: The Dash Patrol DC2 camera mounted on a car windshield, showing its position relative to the rearview mirror for optimal road visibility.

4.3 Włączanie kamery

1. Podłącz ładowarkę samochodową do gniazda zasilania 12 V w pojeździe (gniazdo zapalniczki).
2. Connect the other end of the USB cable to the camera's USB port.
3. The camera will automatically power on and begin recording when your vehicle starts. It will power off shortly after the vehicle is turned off.

4.4 Ustawienia początkowe

Upon first use, or after a reset, you may need to set the date and time. Navigate through the menu using the Up/Down buttons and confirm with the OK button.

5. Instrukcja obsługi

5.1 Podstawowe nagrywanie

The camera automatically starts loop recording when powered on. Older files are overwritten when the memory card is full, except for locked files.

5.2 Czujnik G (automatyczne wykrywanie zdarzeń)

The built-in G-sensor detects sudden impacts or collisions. When an event is detected, the current video segment is automatically locked to prevent it from being overwritten during loop recording.

Image: Illustration of the G-sensor function, showing the camera recording and a lock icon appearing when a collision is detected, indicating the video is protected.

5.3 Parking Monitor Function

When enabled, the parking monitor function allows the camera to automatically record when motion or impact is detected while the vehicle is parked and the engine is off. This provides surveillance even when you are away from your vehicle.

Image: Diagram illustrating the parking monitor function, where the dashcam automatically records when motion is detected around a parked car.

5.4 Funkcjonalność GPS

The integrated GPS module records your vehicle's speed and location data alongside the video footage. Informacje te mogą być viewed during playback using compatible software on a computer.

5.5 Łączność Wi-Fi i aplikacja

The Dash Patrol DC2 features Wi-Fi connectivity, allowing you to connect to a smartphone app for live view, video playback, and settings adjustment. The compatible app is typically named GoPlus Cam.

1. Pobierz GoPlus Cam aplikację ze sklepu z aplikacjami na Twoim smartfonie.
2. Turn on the Dashcam.
3. Press and hold the 'Down' button on the camera until the Wi-Fi symbol appears on the screen.
4. On your smartphone, go to Wi-Fi settings and connect to the camera's Wi-Fi network (SSID usually starts with 'TELLUR' or similar).
5. Open the GoPlus Cam app to manage your camera.

Image: Icon for the GoPlus Cam mobile application, used for connecting to the dashcam via Wi-Fi.

6. Konserwacja

6.1 Zarządzanie kartami MicroSD

• Regularly format the MicroSD card (at least once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the camera's menu settings.
• Replace the MicroSD card if you notice frequent errors or degraded performance.

6.2 Czyszczenie

• Use a soft, dry cloth to clean the camera lens and screen. Avoid abrasive materials or chemical cleaners.
• Keep the camera free from dust and debris.

7. Rozwiązywanie Problemów

If you encounter issues with your Dash Patrol DC2, refer to the following common solutions:

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official TELLUR webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.