maXpeedingrods Coilover Suspension Kit Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, adjustment, and maintenance of your maXpeedingrods 24-level damper adjustable coilover suspension kit. Please read this manual thoroughly before installation and use to ensure proper function and safety. This kit is designed to enhance vehicle handling and allow for adjustable ride height and damping.

2. Informacje dotyczące bezpieczeństwa

• Professional installation is highly recommended. Improper installation can lead to vehicle damage or personal injury.
• Always use appropriate safety equipment, including eye protection and gloves, during installation.
• Przed rozpoczęciem pracy pod pojazdem należy upewnić się, że jest on stabilnie podparty na podnośniku lub podnośniku.
• Do not modify any components of the coilover kit.
• After installation, perform a wheel alignment to ensure correct vehicle geometry.

3. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne i nieuszkodzone.

Image: Packaging list showing 2x Front coil-overs, 2x Rear coil-overs, 1x Allen wrench, and 2x C spanners.

• 2x przednie amortyzatory sprężynowe
• 2x Rear Coil-overs
• 1x klucz imbusowy
• 2x C Spanners (for adjustment)

4. Funkcje produktu

• Dopasowanie: Designed for Subaru BRZ First generation (ZN6/ZC6) 2012-2020, Scion FR-S 2012-2020, and Toyota 86 2012-2020.
• 24 Rebound Force Levels: Allows for precise control over damping. Adjustments range from soft for street use (Level 0-8), medium for mountain roads (Level 9-16), to firm for race tracks (Level 17-24).
  

  Image: Detail of the 24-click damping adjustable knob on the coilover.
• Wiosenna stawka: Front Spring rate: 6 kg/mm (336 in/lbs), Rear Spring rate: 5 kg/mm (280 in/lbs). Springs are high tensile performance, tested for durability with less than 0.04% distortion after 600,000 continuous tests.
• Regulacja wysokości: Adjustable by 1-3 inches, allowing for a lower stance. This design helps reduce turning noise and improves steering feel and response. Note: Does not maintain original ride height.
  

  Image: Illustration of height adjustment mechanism with independent ride height and spring tension settings.

• Adjustable Camber Plates: Front coilovers feature adjustable camber plates made of 6061-T6 aluminum, offering lightweight construction and reduced noise.
  

  Image: Adjustable camber plates for fine-tuning wheel alignment.

• High Rigid Piston Rod: Constructed from steel using high-frequency heat treatment for high rigidity and toughness, ensuring a long-lasting rod lifetime.
  

  Obraz: Wewnętrzny view of the coilover showing the 22mm front rod diameter and high rigid piston rod.
• Trwała konstrukcja: Features anodized shock body with anti-corrosion coating, powder-coated lower mounts, and full-length dust boots for protection against dirt and debris.
  

  Image: Detailed diagram of a coilover with labeled components including the camber plate top mount, upper spring seat, full-length dust boot, 55CrSi steel coil springs, anodized shock body, and powder-coated lower mount.

5. Instalacja

Installation of coilovers requires mechanical knowledge and specialized tools. If you are not confident in your abilities, seek professional assistance.

5.1 Ogólne kroki instalacji

1. Safely lift and support the vehicle. Remove the wheels.
2. Remove the original suspension components.
3. Assemble the new coilover units if necessary (refer to video below).
4. Install the new coilovers, ensuring all bolts are torqued to manufacturer specifications.
5. Załóż ponownie koła i opuść pojazd.
6. Perform a wheel alignment immediately after installation.

5.2 Coilover Assembly (if required)

5.3 Regulacja wysokości

The coilovers allow for independent ride height adjustment. Use the provided C spanners to adjust the lower mount.

1. Loosen the lower mount (A) and locking ring (B).
2. Increase or decrease the thread distance to change the ride height.
3. Tighten the lower mount (A) and locking ring (B) securely.

6. Operating Instructions (Damping Adjustment)

Your coilovers feature 24 levels of rebound damping adjustment to suit various driving conditions and preferences. The adjustment knob is located at the top of the coilover.

• Poziomy 0-8: Recommended for street use, providing a comfortable ride.
• Poziomy 9-16: Suggested for mountain roads or spirited driving, offering a balance of comfort and performance.
• Poziomy 17-24: Ideal for race tracks, providing maximum stiffness and control.

Turn the adjustment knob clockwise for firmer damping and counter-clockwise for softer damping. Make adjustments incrementally and test the vehicle's handling to find your preferred setting.

7. Konserwacja

• Regularly inspect coilovers for any signs of damage, leaks, or corrosion.
• Keep the coilover threads clean and free of debris. Applying a thin layer of anti-seize grease can help prevent seizing.
• Check all mounting bolts and nuts periodically to ensure they are properly torqued.
• Clean the coilovers with mild soap and water, especially after driving in harsh conditions (e.g., salt, dirt).

8. Specyfikacje

Image: Detailed dimensions and spring rates for both front and rear coilover units.

9. Rozwiązywanie Problemów

• Nietypowe dźwięki (stukot/piszczenie): Check all mounting points for proper torque. Inspect for any loose components or contact between parts.
• Nierówna wysokość jazdy: Re-measure and adjust the coilover height on each corner. Ensure spring preload is correctly set.
• Poor Handling/Ride Quality: Zweryfikuj damping settings are appropriate for your driving conditions. Check for proper wheel alignment.

10. Gwarancja i wsparcie

For warranty information, technical support, or assistance with installation, please contact maXpeedingrods customer service. Keep your purchase receipt as proof of purchase.

Więcej informacji znajdziesz w oficjalnym sklepie maXpeedingrods: Sklep maXpeedingrods