Rapid Charger for Two-Way Radios

1. Koniec produktuview

This rapid charger is engineered to efficiently charge batteries for a wide range of two-way radios. It supports multiple battery chemistries including Ni-CD, Ni-MH, and Li-ion, offering versatility and convenience. The charger incorporates advanced microprocessor control for optimal charge management and protection against overcharging.

Key features include a universal 100-240V input voltage, a clear LED indicator for charging status, and a rapid charging rate of up to 1000mAh per hour. The package typically includes one charger base and one AC power adapter.

Image: The WPLN4232 rapid charger base and its accompanying AC power adapter, shown connected and ready for use.

2. Instrukcje konfiguracji

1. Podłącz zasilacz sieciowy: Insert the DC plug of the AC power adapter into the power input port located at the back of the charger base.


Obraz: Zbliżenie view of the back of the charger base, highlighting the power input port where the AC adapter connects.

2. Podłącz do gniazdka elektrycznego: Plug the AC power adapter into a standard 100-240V wall outlet.
3. Initial Power Check: Once connected to power, the charger's LED indicator may briefly illuminate to confirm power reception.

3. Instrukcja obsługi

1. Włóż baterię: Carefully slide the battery (or radio with battery attached) into the charging slot of the charger base. Ensure the battery contacts align correctly with the charger's pins.


Obraz: szczegółowy view of the charger's slot, showing the contact pins where the radio battery connects for charging.

2. Monitoruj stan ładowania: The LED indicator on the charger will display the charging status:
   • Czerwona dioda LED: Oznacza, że ​​bateria jest aktualnie ładowana.
   • Zielona dioda LED: Wskazuje, że akumulator jest w pełni naładowany.


Image: The underside of the charger base, illustrating the LED indicator and its corresponding charging status (red for charging, green for fully charged).

3. Wyjmij baterię: Once the LED turns green, the battery is fully charged and can be removed from the charger.

Kompatybilne modele radia:

• XPR Series: XPR4380, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR8300, XPR3000, XPR3500, XPR3300, XPR7000, XPR7550, XPR7350, XPR7580, XPR7380, XPR3000e, XPR3500e, XPR3300e, XPR7000e, XPR7550e, XPR7350e, XPR7580e, XPR7380e
• DP Series: DP3400, DP3401, DP3600, DP3601, DP4000, DP4400, DP4401, DP4600, DP4601, DP4800, DP4801
• DGP Series: DGP4150, DGP4150+, DGP6150, DGP6150+
• APX & R Series: APX4000, APX3000, APX1000, R7, R7A
• XiRP Series: XiRP8200, XiRP8208, XiRP8260, XiRP8268

Compatible Battery Models:

• PMNN4065, PMNN4066, PMNN4066A, PMNN4069, PMNN4077, PMNN4077C, PMNN4409, PMNN4409AR, PMNN4407, PMNN4807, PMNN4807A, PMNN4808, PMNN4808A, PMNN4809, PMNN4809A, PMNN4810, PMNN4810A, PMNN4407, PMNN4412, PMNN4435, PMNN4448, PMNN4489, PMNN4491, PMNN4493, PMNN4889, NNTN8128, NNTN8129, NNTN8287

4. Konserwacja

• Czyszczenie: Regularly wipe the charger base and contacts with a dry, soft cloth to prevent dust and debris buildup. Do not use liquid cleaners or solvents.
• Składowanie: Przechowuj ładowarkę w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur, gdy nie używasz ładowarki.
• Obsługiwanie: Unikaj upuszczania ładowarki i narażania jej na silne uderzenia, ponieważ mogą one uszkodzić jej wewnętrzne podzespoły.

5. Rozwiązywanie Problemów

• Ładowarka się nie włącza:
  • Ensure the AC power adapter is securely connected to both the charger base and a working wall outlet.
  • Sprawdź, czy gniazdo zasilania jest aktywne.
• Battery Not Charging (Red LED not lit):
  • Check that the battery is properly seated in the charging slot and its contacts are aligned with the charger pins.
  • Inspect battery and charger contacts for dirt or damage. Clean if necessary.
  • The charger includes features for un-chargeable and low-health battery detection. If the battery is severely damaged or at the end of its life, it may not charge.
• Powolne ładowanie:
  • Ensure the charger is used within its specified operating temperature range.
  • Verify that the battery is compatible with this rapid charger.

6. Specyfikacje

7. Gwarancja i wsparcie

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, please refer to the product packaging or contact the seller directly.

For technical support or further assistance, please reach out to the seller or manufacturer through their official contact channels.