Transformers WFC-E19

Transformers Generations War for Cybertron: Earthrise Deluxe WFC-E19 Quintesson Allicon Instrukcja obsługi figurki akcji

1. Wprowadzenie

This manual provides detailed instructions for the assembly, operation, and care of your Transformers Generations War for Cybertron: Earthrise Deluxe WFC-E19 Quintesson Allicon Action Figure. Please read these instructions carefully before use.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: NIEBEZPIECZEŃSTWO ZADŁAWIENIA SIĘ - małe części. Nieodpowiednie dla dzieci poniżej 3 lat. Zalecany nadzór osoby dorosłej podczas zabawy.

3. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

  • 1x Quintesson Allicon Action Figure
  • 1x Spear Accessory
  • 1x Red Decoder
  • 1x Instructions Manual (this document)
Transformers Earthrise Quintesson Allicon figure in its retail packaging.

Image: The Transformers Earthrise Quintesson Allicon figure displayed in its retail packaging, showing the robot mode and included spear accessory.

4. Instrukcja obsługi: Transformacja

The Quintesson Allicon figure can transform between its robot mode and beast mode in 14 steps. Follow the steps below for a smooth transformation.

4.1. Robot Mode to Beast Mode

  1. Remove the spear accessory from the figure's hand.
  2. Fold the robot's feet upwards to form the beast mode's rear legs.
  3. Obróć talię robota o 180 stopni.
  4. Collapse the robot's chest and head into the body, revealing the beast mode head.
  5. Extend the beast mode's jaw and position it.
  6. Adjust the robot's arms to form the beast mode's front legs, ensuring the claws are positioned forward.
  7. Extend the tail section from the back of the figure.
  8. Secure all panels and tabs to lock the figure in beast mode.
  9. The spear accessory can be stored or held by the beast mode.
Transformers Earthrise Quintesson Allicon in robot mode, holding a spear.

Image: The Quintesson Allicon figure in its robot mode, standing upright and holding its spear accessory.

Transformers Earthrise Quintesson Allicon in beast mode, holding a spear.

Image: The Quintesson Allicon figure transformed into its beast mode, resembling an alligator-like creature, holding the spear.

4.2. Beast Mode to Robot Mode

Reverse the steps above to transform the Allicon from beast mode back to robot mode.

Video: A demonstration of the Transformers Earthrise Quintesson Allicon figure transforming between its robot and beast modes. This video provides a visual guide to the 14-step transformation process.

4.3. Map and Decoder

Each package includes a piece of the Transformers Universe map and a red decoder. Use the red decoder to reveal hidden paths and details on the map. Collect other Earthrise figures to complete the full map.

Hand holding a red decoder over a Transformers Universe map piece.

Image: A hand holding the included red decoder over a section of the Transformers Universe map, illustrating how to reveal hidden details.

5. Konserwacja

To ensure the longevity of your action figure:

  • Keep the figure clean by wiping it with a dry, soft cloth. Avoid harsh chemicals or abrasive materials.
  • Przechowuj figurkę w miejscu niedostępnym dla dzieci, chroniąc ją przed bezpośrednim działaniem promieni słonecznych i ekstremalnymi temperaturami, aby zapobiec odbarwieniu lub degradacji materiału.
  • Handle joints and moving parts gently during transformation to prevent breakage.

6. Rozwiązywanie Problemów

Jeżeli masz problemy z sylwetką, weź pod uwagę następujące kwestie:

  • Sztywne stawy: If joints are stiff, gently work them back and forth. Avoid excessive force. Applying a very small amount of silicone shock oil (not petroleum-based lubricants) to the joint pin can help, but use with extreme caution and sparingly.
  • Części nie są wyrównane: Ensure all previous transformation steps are completed correctly. Check for any tabs or pegs that need to be fully inserted into their corresponding slots. Refer to the transformation video for visual guidance.
  • Detached Tail Piece: The tail piece is attached via a peg. If it detaches, carefully re-insert the peg into its slot. When rotating the tail, apply pressure at the peg base, not above the metal pin, to prevent damage.
  • Brakujące akcesoria: Verify package contents upon opening. If an accessory is missing, contact customer support.

7. Specyfikacje

MarkaTransformatory
Numer modeluWFC-E19 (E7158)
Wymiary produktu3.94 x 1.18 x 5.51 cala
Waga przedmiotu2.22 uncji
Zalecany wiek producenta8 lata i więcej
Data wydania1 sierpnia 2020 r.
ProducentHasbro

8. Gwarancja i wsparcie

For information regarding product warranty or to contact customer support, please visit the official Hasbro weblub u sprzedawcy, u którego produkt został zakupiony. Zachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

Official Transformers Store: Sklep Transformers na Amazonie

© 2025 Transformers / Hasbro. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.