Wstęp
This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your VEVOR Double-Pipe Bottled Water Dispenser Pump System. Please read this manual thoroughly before use and retain it for future reference.
Cechy produktu
- Dual-Tube System: Designed for two 5-gallon bottled water containers, extending usage cycles and reducing water change frequency.
- Wysoka wydajność: Operates at 40-60 PSI (2.8-4.1 bar) with a water outlet flow rate of 0.67 GPM (2.5 L/min) for consistent water supply.
- Szerokie zastosowanie: Suitable for providing clean water to faucets, refrigerators, ice makers, and coffee machines.
- Dual Switch Protection: Features a buoyancy switch for automatic shut-off when bottles are empty and a water pressure switch for automatic water supply upon faucet opening.
- Cicha praca: Equipped with 4 shock-absorbing pads to minimize noise during use.
Instrukcje bezpieczeństwa
- Ensure the power supply matches the product's voltage (110 woltów).
- Always turn off the dispenser when changing water bottles.
- Nie należy uruchamiać pompy na sucho przez dłuższy okres czasu.
- Trzymaj urządzenie z dala od źródeł ciepła i bezpośredniego światła słonecznego.
- Use only food-grade tubing and connectors for water contact.
- Regularly inspect all connections for leaks.
Zawartość opakowania
- Bottled Water Dispensing System Unit
- 1/4" PE Tube (Length: 19.69 ft / 600 cm)
- Pre-installed Quick Connect (x1)
- Connector Nut (x1)
- Pierścień uszczelniający (x1)
- Silicone Foot Pads (x4)
Konfiguracja i instalacja
Follow these steps for proper installation of your VEVOR Bottled Water Dispenser Pump System.
1. Rozpakowanie i ustawienie
- Ostrożnie wyjąć wszystkie elementy z opakowania.
- Choose a suitable location for the pump unit and water bottles. Ensure there is enough space for two 5-gallon bottles and that the pump unit is mounted securely.
2. Connecting the Tubing
- Insert the long intake tubes into the 5-gallon water bottles. Ensure the tubes reach the bottom of the bottles.
- Connect the other end of the intake tubes to the designated inlet ports on the pump unit.
- Connect the 1/4" PE tube from the pump's outlet port to your appliance (e.g., refrigerator, coffee machine, faucet). Use the provided quick connect and sealing ring for a secure, leak-free connection.
3. Podłączenie zasilania
- Podłącz przewód zasilający do standardowego gniazdka elektrycznego 110 V.
Działanie
The VEVOR Bottled Water Dispenser Pump System is designed for automatic operation.
- Włączanie: Flip the power switch on the pump unit to the "ON" position. The pump will pressurize the system.
- Dozowanie wody: When your connected appliance (e.g., refrigerator dispenser, coffee machine) demands water, the pump will automatically activate to supply water.
- Automatyczne wyłączanie: The built-in buoyancy switch will detect when a water bottle is empty and automatically stop the pump to prevent dry running.
- Pressure Maintenance: The water pressure switch maintains consistent pressure in the line, ensuring a steady flow when needed.
Konserwacja
Regularna konserwacja zapewnia optymalną wydajność i długą żywotność dozownika.
- Changing Water Bottles: Always turn off the pump unit before replacing empty water bottles. This prevents air from entering the system and ensures proper priming.
- Czyszczenie: Periodically clean the exterior of the pump unit with a damp ściereczka. Nie używaj środków czyszczących o właściwościach ściernych.
- Inspekcja rur: Inspect the PE tubing for any kinks, cracks, or signs of wear. Replace if necessary.
- Płukanie systemu: If the system has been idle for an extended period, flush a small amount of water through it before use.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Pompa nie działa | No power; Power switch off; Empty water bottle; Loose connection. | Check power cord and outlet; Turn on power switch; Replace water bottle; Secure all electrical and tubing connections. |
| Niski przepływ wody | Kinked tubing; Partially empty bottle; Air in the system; Clogged filter on intake tube. | Straighten tubing; Replace water bottle; Turn off and on to re-prime; Clean or replace intake filter. |
| Pompa pracuje w sposób ciągły | Leak in the system; Air leak in intake tube; Faulty pressure switch. | Check all connections for leaks; Ensure intake tubes are fully submerged and sealed; Contact customer support if switch is faulty. |
| Niezwykły hałas | Vibration; Air in the system; Obstruction in pump. | Ensure pump is securely mounted; Check for air in lines; Inspect pump for foreign objects (unplug first). |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | WIĘZIĆ |
| Numer modelu | Bottled Water Dispensing Pump System |
| Styl | Double Inlet |
| Moc znamionowa | 50 W |
| Zakres ciśnienia roboczego | 40-60 psi (2.8-4.1 bar) |
| Water Outlet Flow Rate | > 0.67 GPM / > 2.5 L/min |
| Pump Head Flow Rate | > 1 GPM / > 3.8 L/min |
| Tomtage | 110 wolty |
| Wymiary produktu | 5.5" gł. x 2.8" szer. x 7.9" wys. (14 cm gł. x 7.1 cm szer. x 20.1 cm wys.) |
| Waga przedmiotu | 5.98 funtów (2.71 kg) |
| Tworzywo | Plastikowy |
| Typ instalacji | Samodzielny |
| Źródło zasilania | Elektryczny przewodowy |
Gwarancja i wsparcie
VEVOR products are designed for durability and performance. For technical support, warranty information, or any inquiries, please visit the official VEVOR support webstrona: www.vevor.com/support.
Proszę zachować paragon zakupu na wypadek reklamacji.