NTONPOWER USB Heated Warm Eye Mask Instruction Manual

1. Wprowadzenie

This manual provides instructions for the safe and effective use of your NTONPOWER USB Heated Warm Eye Mask. This device is designed to provide warm compression to the eyes, which may assist in relieving symptoms associated with dry eyes, blepharitis, and general eye fatigue. Please read this manual thoroughly before first use and retain it for future reference.

2. Środki ostrożności

• Do not use this product if you have any eye infections, injuries, or recent eye surgery without consulting a medical professional.
• Avoid direct contact with water. The mask is washable, but the USB cable and controller are not.
• Nie stosować podczas snu lub w stanie nieprzytomności.
• Należy natychmiast przerwać stosowanie, jeśli wystąpi jakikolwiek dyskomfort, ból lub podrażnienie.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Ensure the USB power source is appropriate (5V/1A or higher recommended).
• Nie wolno modyfikować ani rozmontowywać urządzenia.

3. Zawartość opakowania

• NTONPOWER USB Heated Warm Eye Mask
• USB Power Cable with Controller
• Instrukcja obsługi

4. Koniec produktuview

The eye mask consists of a soft fabric mask with an integrated heating element and a detachable USB power cable with an inline controller for temperature and timer settings.

Image: The eye mask features a magnetic absorption charging port for easy connection of the USB cable.

5. Konfiguracja

1. Podłącz kabel USB: Locate the magnetic charging port on the eye mask. Connect the USB power cable to this port. The magnetic connection will secure it in place.
2. Podłącz do źródła zasilania: Plug the USB end of the cable into a suitable power source. This can be a wall adapter (not included), a computer USB port, or a power bank.

Image: The eye mask requires a continuous power supply via USB during use. Compatible power sources include wall outlets with an adapter, computer USB ports, or a portable power bank.

6. Instrukcja obsługi

6.1 Włączanie/wyłączanie

• To turn on: Press and hold the power button on the inline controller for approximately 3 seconds. The indicator light will illuminate.
• To turn off: Press and hold the power button again for approximately 3 seconds. The indicator light will turn off.

6.2 Regulacja temperatury

The eye mask features three temperature levels. Once the device is on, short press the power button to cycle through the temperature settings.

• Niebieskie światło: Approximately 38°C (Low)
• Zielone światło: Approximately 40°C (Medium)
• Czerwone światło: Approximately 45°C (High)

The mask heats rapidly, typically reaching the desired temperature within 30 seconds.

Image: The inline controller allows selection of three temperature levels: 38°C, 40°C, and 45°C. The mask warms up quickly.

6.3 Korzystanie z timera

The eye mask includes a 1-hour countdown timing feature for convenience and safety.

• The timer automatically activates when the mask is turned on.
• The device will automatically shut off after 60 minutes of continuous operation.

Image: The eye mask features an automatic 1-hour countdown timer, ensuring the device turns off after 60 minutes of use.

7. Pielęgnacja i konserwacja

7.1 Czyszczenie

The fabric portion of the eye mask is washable and reusable. Ensure the USB cable and controller are detached before cleaning.

• Hand wash the mask gently with mild soap and water.
• Nie prać w pralce i nie suszyć w suszarce bębnowej.
• Ensure the mask is completely dry before reattaching the USB cable and using it again.
• Do not immerse the USB cable or controller in water.

Image: The eye mask is made of 100% cotton and is designed to be washable and reusable. Recommended washing temperature is between 20°C and 45°C.

7.2 Przechowywanie

Store the eye mask in a clean, dry place away from direct sunlight and extreme temperatures when not in use.

8. Rozwiązywanie Problemów

• Urządzenie się nie włącza:
  • Ensure the USB cable is securely connected to both the mask and the power source.
  • Verify the power source is active and providing sufficient power (e.g., try a different USB port or adapter).
  • Confirm you are pressing and holding the power button for approximately 3 seconds to activate the device. A short press will only cycle temperature modes if already on.
• Mask is not heating or stops heating:
  • Check if the indicator light on the controller is on. If not, refer to the 'Device does not turn on' steps.
  • The device has an automatic 1-hour shut-off. If it has been in use for 60 minutes, it will turn off. Restart the device if needed.
  • Ensure the USB connection is stable. A loose connection can interrupt power.
  • Jeśli problem będzie się powtarzał, skontaktuj się z obsługą klienta.

9. Specyfikacje

10. Gwarancja i wsparcie

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official NTONPOWER webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.