FREESEA FS28-50W Aquarium Heater User Manual

Wstęp

Thank you for choosing the FREESEA FS28-50W Aquarium Heater. This submersible heater is designed to maintain a stable temperature in your aquarium, suitable for 1-10 gallon freshwater, saltwater, betta, and turtle tanks. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

Ważne instrukcje bezpieczeństwa

• Zawsze upewnij się, że grzejnik jest 100% fully submerged in water during operation. Operating the heater out of water will cause damage and poses a safety risk.
• Unplug the heater from the power outlet before performing any maintenance, cleaning, or water changes in the aquarium.
• Nie należy używać grzejnika, jeśli przewód zasilający lub wtyczka są uszkodzone.
• To urządzenie jest przeznaczone wyłącznie do użytku wewnątrz pomieszczeń.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Upewnij się, że objętośćtage specified on the heater matches your local power supply.
• Avoid placing the heater directly on the substrate if it can be buried, as this may impede heat dissipation.
• Do not attempt to repair the heater yourself. Refer all servicing to qualified personnel.

Produkt ponadview

The FREESEA FS28-50W Aquarium Heater features an external temperature controller for easy adjustment and a digital LED display for real-time temperature monitoring. It includes multiple safety features to protect your aquatic environment.

Główne cechy:

• Moc 50W: Suitable for 1-10 gallon aquariums.
• Zewnętrzny regulator temperatury: Easy and precise temperature adjustment from 63℉ to 94℉ (17℃ to 34℃).
• Cyfrowy wyświetlacz LED: Shows current water temperature and error codes.
• Podwójna ochrona bezpieczeństwa: Automatic shut-off when out of water (E1 error) and overheating protection above 94℉ (E2 error).
• Funkcja pamięci: Retains set temperature after power interruption.
• Fully Submersible Design: Można umieścić pionowo lub poziomo.

Figure 1: FREESEA FS28-50W Aquarium Heater. This image displays the main unit of the heater with its digital temperature display, connected to the power cord and external controller. A betta fish is shown in the background, indicating its intended use.

Figure 2: Digital Display and External Controller. This image highlights the LED digital temperature display on the heater unit and the external controller with its 'SET' button and power indicator light. It shows how to adjust the temperature.

Figure 3: Double Safety Protection. This image illustrates the auto power-off feature (E1 error when out of water) and overheating protection (E2 error when temperature exceeds 95℉), showing the internal components and safety mechanisms.

Specyfikacje

Instrukcje konfiguracji

1. Rozpakować: Ostrożnie wyjmij grzejnik i wszystkie akcesoria z opakowania. Sprawdź, czy nie ma uszkodzeń.
2. Umieszczenie:
   • Attach the heater to the inside wall of your aquarium using the provided suction cups.
   • Ensure the heater is positioned in an area with good water circulation for even heat distribution.
   • The heater can be installed vertically or horizontally. If installing horizontally, ensure it is not buried in the substrate.
   • The heater must be completely submerged in water at all times. Do not allow any part of the heater to be exposed to air during operation.
3. Umiejscowienie kontrolera: Mount the external temperature controller on the outside edge of the tank or in a convenient location where it is easily accessible and dry.
4. Wait for Temperature Equalization: After placing the heater in the tank, wait approximately 15-20 minutes for the heater's temperature sensor to equalize with the water temperature before plugging it in.
5. Podłączenie zasilania: Plug the heater into a suitable power outlet (110-120V, 60Hz). Ensure a drip loop is formed with the power cord to prevent water from running down the cord to the outlet.

Figure 4: Installation Methods. This diagram illustrates correct (fully submerged, vertical or horizontal) and incorrect (partially submerged, controller in water) installation positions for the heater.

Instrukcja obsługi

1. Włączanie: Once plugged in, the LED display on the heater will show the current water temperature. The indicator light on the external controller will illuminate.
2. Ustaw temperaturę:
   • Press the 'SET' button on the external controller. The displayed temperature will flash.
   • Each press of the 'SET' button will cycle through the available temperature settings from 63℉ to 94℉ (17℃ to 34℃).
   • Stop pressing when your desired temperature is displayed. The heater will automatically save the setting after a few seconds of inactivity and return to displaying the current water temperature.
3. Wskaźnik ogrzewania: When the heater is actively heating, a red indicator light above the digital display on the heater unit will be illuminated.
4. Stabilność temperatury: The heater will work to maintain the set temperature. Allow several hours for the aquarium water to reach the desired temperature, especially after initial setup or large water changes.
5. Funkcja pamięci: W przypadku awarii zasilaniatage, the heater will remember your last set temperature and resume heating to that setting once power is restored.

Konserwacja

• Odłącz zasilanie: Always unplug the heater from the power outlet before performing any maintenance or cleaning.
• Czyszczenie: Periodically clean the heater's surface to remove algae or mineral deposits. Use a soft cloth or sponge and aquarium-safe cleaning tools. Do not use harsh chemicals or abrasive materials.
• Kontrola: Regularly inspect the heater for any signs of damage, such as cracks in the glass or frayed power cords. If damage is found, discontinue use immediately and replace the unit.
• Przyssawki: Check the suction cups periodically to ensure they are securely holding the heater in place. If they lose their grip, clean them and the tank surface, or replace them if necessary.

Rozwiązywanie problemów

Gwarancja i obsługa klienta

FREESEA is committed to providing high-quality products and excellent customer service. If you encounter any issues with your FREESEA FS28-50W Aquarium Heater or have questions regarding its operation, please do not hesitate to contact our professional after-sales service team.

For warranty details and support, please refer to the contact information provided with your purchase or visit the official FREESEA website. Our team is available to assist you with any concerns.