Leviton GFSW1-W Smartlockpro GFCI Receptacle & Switch Instruction Manual

1. Wprowadzenie

This manual provides essential information for the safe installation, operation, and maintenance of your Leviton GFSW1-W Smartlockpro Tamper-Resistant Combo GFCI Receptacle & Switch. This device combines a ground fault circuit interrupter (GFCI) receptacle with a standard switch, offering enhanced electrical safety and convenience in a single unit. Please read these instructions thoroughly before beginning installation or use.

2. Informacje dotyczące bezpieczeństwa

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. IMPROPER INSTALLATION OR USE MAY RESULT IN SERIOUS INJURY OR DEATH.

• Przed instalacją lub serwisowaniem urządzenia należy zawsze wyłączyć zasilanie za pomocą wyłącznika automatycznego lub skrzynki bezpiecznikowej.
• Instalację musi wykonać wykwalifikowany elektryk, zgodnie ze wszystkimi krajowymi i lokalnymi przepisami elektrycznymi.
• Nie używaj tego urządzenia z przewodami aluminiowymi. Używaj wyłącznie z przewodami miedzianymi lub miedziowanymi.
• Upewnij się, że wszystkie połączenia przewodów są solidne i właściwie zaizolowane.
• This device is designed for indoor use in dry locations unless otherwise specified.

3. Funkcje produktu

• Funkcja autotestu: Provides continuous ground fault protection by automatically testing the GFCI. It detects and trips on actual ground faults even during self-testing.
• Initial Power-Up Test: Tests the GFCI within 3 seconds of initial power-up.
• Auto-Monitoring: Exceeds UL requirements by adapting and shifting to more frequent testing if a potential problem is detected.
• Protection Status Indicator: An LED light provides simple, intuitive feedback on power and protection status, including indication of line/load reversal.
• Patented Bridge Contact: Ensures no power is delivered to the receptacle face if improperly wired (line-load reversed).
• Enhanced Immunity: Improved immunity to high-frequency noise reduces nuisance tripping.
• Surge Resistance: Advanced electronics provide superior resistance to electrical surges and over-voltagt.j.
• Lockout Action: Patented lockout action prevents reset if the GFCI is damaged and cannot respond to a ground fault.
• TampGniazdo odporne na er: Designed to prevent insertion of foreign objects into the receptacle openings.
• Trwała konstrukcja: Features an impact-resistant thermoplastic cover and polycarbonate body.

4. Specyfikacje

5. Instalacja (konfiguracja)

WAŻNY: Turn OFF power at the circuit breaker or fuse box before wiring. Failure to do so may result in serious injury or death.

1. Przygotuj okablowanie: Carefully remove the existing device from the wall box. Identify the LINE (incoming power) and LOAD (downstream protection) wires. If you are unsure, consult a qualified electrician.
2. Podłącz przewody:
   • Connect the LINE hot wire to the brass LINE terminal.
   • Connect the LINE neutral wire to the silver LINE terminal.
   • If protecting downstream receptacles, connect the LOAD hot wire to the brass LOAD terminal.
   • If protecting downstream receptacles, connect the LOAD neutral wire to the silver LOAD terminal.
   • Connect the ground wire to the green ground screw.
   • Sprawdź, czy wszystkie połączenia są dobrze dokręcone i bezpieczne.
3. Zamontuj urządzenie: Carefully fold the wires into the wall box. Mount the GFCI receptacle and switch into the wall box using the provided screws.
4. Zainstaluj płytkę ścienną: Attach the wallplate (not included) over the device.
5. Przywróć zasilanie: Turn ON power at the circuit breaker or fuse box.
6. Przetestuj GFCI: Perform the initial test as described in the "Operation" section to ensure proper functioning.

Image: The Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch, white in color, shown installed on a white tiled wall. It features a rocker switch at the top, and below it, a GFCI receptacle with "RESET" and "TEST" buttons, and a small LED indicator light.

6. Działanie

The Leviton GFSW1-W combines a standard light switch with a GFCI-protected receptacle.

• Funkcja przełącznika: The top rocker switch operates connected lighting or other loads. Press the top to turn ON, press the bottom to turn OFF.
• GFCI Receptacle: The lower portion provides a 15 Amp, 125 Volt tamper-resistant outlet with ground fault protection.
• Testing the GFCI:
  1. Podłącz wszystkieamp or other device into the GFCI receptacle and turn it ON.
  2. Press the "TEST" button. The GFCI should trip, and the lamp/device should turn OFF. The LED indicator may change color or turn off.
  3. Press the "RESET" button. The GFCI should reset, and the lamp/device should turn ON. The LED indicator should return to its normal operating state (e.g., green).
  4. If the GFCI does not trip or reset as described, it may be improperly wired or defective. Do not use and consult a qualified electrician.
• Resetowanie GFCI: If the GFCI trips (power is interrupted), press the "RESET" button firmly. If it does not reset, check for a ground fault or consult the troubleshooting section.

7. Konserwacja

Regular testing of your GFCI device is crucial to ensure continued protection against ground faults. Leviton recommends testing your GFCI monthly.

• Follow the "Testing the GFCI" procedure outlined in the Operation section at least once a month.
• If the GFCI fails to trip or reset during testing, it must be replaced immediately.
• Keep the device and wallplate clean. Use a soft, damp ściereczka do czyszczenia; unikaj środków czyszczących o właściwościach ściernych i rozpuszczalników.

8. Rozwiązywanie Problemów

9. Gwarancja i wsparcie

Limited Two-Year Product Warranty: Leviton warrants this product to be free from defects in material and workmanship under normal use and service for a period of two years from the date of original purchase. For complete warranty details, please refer to the documentation included with your product or visit the official Leviton webstrona.

Obsługa klienta: If you require assistance with installation, troubleshooting, or have questions about your Leviton GFSW1-W device, please contact Leviton Customer Service. Contact information can typically be found on the product packaging or the official Leviton webStrona (www.leviton.com).