Fengda FD-189 Professional Airbrush Compressor User Manual

1. Wprowadzenie

The Fengda FD-189 is a professional, oil-free mini airbrush compressor designed for a variety of applications including airbrushing, cosmetic studios, nail art, tattoo art, and hobby use. This compact and portable compressor features a 3-liter air tank, a pressure regulator with a filter and manometer, and operates quietly at 47 dB. It is suitable for airbrushes with nozzle sizes ranging from 0.2 mm to 1.0 mm.

Główne cechy obejmują:

• Maintenance-free and oil-free piston design.
• Compact, portable, and quiet operation (47 dB).
• Integrated pressure regulator with manometer, water trap, and air filter.
• Safety valve and automatic overheat protection.
• Dual operating modes: Level 1 (Max 4 bar, auto stop/start) and Level 2 (Max 6 bar, non-stop).
• 3-liter air receiver tank for pulse-free output and consistent air flow (20-23 L/min).

Rysunek 1: Koniecview of the Fengda FD-189 Airbrush Compressor. This image displays the main unit with its black air tank, silver compressor head, pressure regulator, and carrying handle.

2. Instrukcje bezpieczeństwa

Read all safety warnings and instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Bezpieczeństwo elektryczne: Upewnij się, że zasilanie jest zgodne z objtage specified on the compressor (220-240V / 50Hz). Do not operate the compressor with a damaged cord or plug. Keep the power cord away from heat, oil, sharp edges, or moving parts.
• Środowisko operacyjne: Use the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating.
• Bezpieczeństwo osobiste: Always wear appropriate personal protective equipment, including eye protection, when operating the airbrush and compressor. Do not direct the air stream at people or animals.
• Bezpieczeństwo ciśnieniowe: Never exceed the maximum operating pressure of the airbrush or the compressor. Ensure all connections are secure before operation. Do not tampz zaworem bezpieczeństwa.
• Konserwacja: Disconnect the power supply before performing any maintenance or adjustments. Regularly drain condensation from the air tank.
• Zabezpieczenie przed przegrzaniem: The compressor is equipped with automatic overheat protection. If the unit overheats, it will shut down automatically. Allow it to cool before restarting.

3. Zawartość opakowania

Ostrożnie rozpakuj pudełko i upewnij się, że wszystkie elementy są obecne i nieuszkodzone. Jeśli któregokolwiek elementu brakuje lub jest uszkodzony, skontaktuj się ze sprzedawcą.

• 1x Fengda FD-189 Airbrush Compressor with 3L Air Tank
• 1x Pressure Regulator with Filter and Manometer
• 1x Kabel zasilający
• 1x Instrukcja obsługi

Figure 2: The Fengda FD-189 Airbrush Compressor as packaged in protective foam. This image shows the compressor securely nestled within custom-fit white foam packaging, indicating careful protection during transit.

4. Konfiguracja

1. Umieszczenie: Umieść sprężarkę na stabilnej, równej powierzchni w dobrze wentylowanym pomieszczeniu. Upewnij się, że wokół urządzenia jest wystarczająco dużo miejsca, aby umożliwić cyrkulację powietrza.
2. Podłącz wąż powietrza: Connect your airbrush hose (not included) to the G 1/8" air outlet on the pressure regulator. Ensure the connection is tight to prevent air leaks.
3. Podłącz zasilanie: Plug the power cable into a suitable grounded electrical outlet (220-240V / 50Hz).
4. Kontrola wstępna: Before turning on, ensure the pressure regulator knob is turned fully counter-clockwise to the lowest pressure setting.

Rysunek 3: Szczegółowy view of the pressure regulator, manometer, and rubber feet of the Fengda FD-189 compressor. This image highlights the adjustable pressure knob, the pressure gauge for monitoring, and the stable rubber feet designed to reduce vibration.

5. Instrukcja obsługi

1. Włączanie: Locate the power switch on the compressor and turn it to the 'ON' position. The compressor will begin to fill the air tank until it reaches the set pressure.
2. Wybierz tryb pracy: The FD-189 features dual switches for different operating modes:
   • Level 1 (Auto Stop/Start): This mode allows the compressor to automatically stop when the tank pressure reaches 4 bar (57 PSI) and restart when the pressure drops to 3 bar (43 PSI). This conserves energy and reduces wear.
   • Level 2 (Non-Stop): In this mode, the compressor operates continuously up to a maximum pressure of 6 bar (87 PSI). This is suitable for applications requiring a constant, higher air flow.
3. Dostosuj ciśnienie: Turn the knob on the pressure regulator clockwise to increase the output air pressure, and counter-clockwise to decrease it. Monitor the manometer to set the desired working pressure for your airbrush. Pull the knob up to unlock it for adjustment, then push it down to lock the setting.
4. Drain Water Trap: The water trap (moisture filter) collects condensation. Regularly check and drain it by pressing the small pin or turning the valve at the bottom of the filter cup.
5. Wyłączone: After use, turn the power switch to 'OFF'. Disconnect the power cable from the outlet.

Rysunek 4: Zbliżenie view of the carrying handle and the model identification label on the Fengda FD-189 compressor. This image shows the ergonomic handle for portability and the label displaying the model number FD-189 and electrical specifications.

6. Konserwacja

The Fengda FD-189 compressor is designed to be maintenance-free due to its oil-free piston design. However, regular checks and simple procedures will ensure its longevity and optimal performance.

• Opróżnij zbiornik powietrza: To prevent rust and ensure proper function, regularly drain any condensation from the 3-liter air tank. This is typically done via a drain valve located at the bottom of the tank.
• Clean Water Trap: Periodically inspect and clean the water trap filter. Drain accumulated moisture as described in the operating instructions. If the filter element appears dirty or clogged, it may need cleaning or replacement.
• Ogólne sprzątanie: Keep the exterior of the compressor clean and free of dust and debris. Use a soft, dry cloth. Do not use harsh chemicals or solvents.
• Filtr powietrza: The compressor includes an air filter. Check it periodically for cleanliness. A clogged air filter can reduce performance.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

Information regarding specific warranty terms and conditions is not detailed in the provided product materials. For warranty claims or technical support, please contact your original retailer or the manufacturer, Fengda, directly. Keep your purchase receipt as proof of purchase.