KORG STB1-BK Digital Piano Stand Instruction Manual

Wstęp

Dziękujemy za zakupasing the KORG STB1-BK Digital Piano Stand. This stand is specifically designed to complement your KORG B1 or B2+ Digital Piano, providing a stable and aesthetically pleasing support structure. It elevates your digital piano to a standard playing height, enhancing your musical experience. This manual provides essential information for safe assembly, proper use, and maintenance of your stand.

Informacje dotyczące bezpieczeństwa

Przed montażem i użyciem należy uważnie przeczytać wszystkie instrukcje.
Przed rozpoczęciem montażu należy upewnić się, że wszystkie elementy są obecne i nieuszkodzone.
Aby zapobiec zarysowaniom, stojak należy zamontować na miękkiej i czystej powierzchni.
Do montażu należy używać wyłącznie dostarczonych elementów montażowych.
Nie dokręcaj śrub zbyt mocno, gdyż może to uszkodzić materiał.
Ensure the stand is placed on a level, stable surface before placing the digital piano on it.
Nie należy pozwalać dzieciom wspinać się na stojak ani bawić się nim.
Okresowo sprawdzaj wszystkie elementy mocujące, aby mieć pewność, że są dobrze dokręcone.

Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie poniższe elementy:

Left Leg Panel (1)
Right Leg Panel (1)
Rear Cross Panel (1)
Mounting Screws (Quantity as specified in hardware pack)
Assembly Instructions (This document)

Note: A cross-point (Phillips head) screwdriver is required for assembly and is not included.

Konfiguracja i montaż

Follow these steps to assemble your KORG STB1-BK Digital Piano Stand. It is recommended to have a second person assist during the final placement of the digital piano.

Rozpakuj komponenty: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify the Left Leg Panel, Right Leg Panel, and Rear Cross Panel.
Attach Rear Cross Panel to Leg Panels: Align the pre-drilled holes on the ends of the Rear Cross Panel with the corresponding holes on the inner sides of the Left and Right Leg Panels. Use the provided mounting screws and a cross-point screwdriver to securely fasten the panels together. Ensure the stand forms a stable, rectangular structure. Do not overtighten.

Image: Illustration of the stand's components being assembled. The leg panels are connected by the rear cross panel, forming the base structure.
Umiejscowienie stojaka: Once assembled, carefully lift the stand and place it in your desired location. Ensure the floor surface is level and stable to prevent wobbling.
Place the Digital Piano: With assistance, carefully lift your KORG B1 or B2+ Digital Piano and align it with the top edges of the assembled stand. Gently lower the piano onto the stand, ensuring it sits securely and evenly. The stand is designed to cradle the piano, providing a snug fit.

Image: The KORG STB1-BK stand fully assembled with a KORG digital piano placed on it, ready for use.

Instrukcja obsługi

The KORG STB1-BK stand is designed for passive support of your digital piano. Once assembled and the piano is placed, no further operational steps are required for the stand itself.

Ensure the digital piano is centered and stable on the stand before use.
Avoid leaning heavily on the stand or applying excessive force, as this may compromise stability.
If moving the piano and stand, always lift both components carefully, preferably with assistance, to prevent damage or injury.

Konserwacja

To ensure the longevity and appearance of your KORG STB1-BK Digital Piano Stand, follow these simple maintenance guidelines:

Czyszczenie: Wipe the stand regularly with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp Można użyć ściereczki zwilżonej łagodnym mydłem, a następnie dokładnie wysuszyć. Unikać środków czyszczących o działaniu ściernym i rozpuszczalników.
Kontrola elementów złącznych: Periodically (e.g., every 6 months) check all assembly screws to ensure they are still tight. Retighten if necessary, but do not overtighten.
Warunki środowiskowe: Avoid placing the stand in direct sunlight or near heat sources, as this can cause material degradation or discoloration. Maintain a stable room temperature and humidity.

Rozwiązywanie problemów

If you encounter any issues with your KORG STB1-BK Digital Piano Stand, refer to the following common problems and solutions:

Problem	Możliwa przyczyna	Rozwiązanie
Stand wobbles after assembly.	Nierówna powierzchnia podłogi. Śruby nie są całkowicie dokręcone. Components not aligned correctly during assembly.	Move the stand to a level surface or use shims under the legs if necessary. Check and retighten all assembly screws. Disassemble and reassemble, ensuring all parts are correctly aligned.
Screw does not go all the way in.	Misaligned screw hole. Cross-threaded screw. Obstruction in the hole.	Remove the screw, realign the components, and try again. Ensure the screw is inserted straight. If cross-threaded, try a different screw hole if available, or contact support. Check for any debris in the hole.
Digital piano does not sit securely on the stand.	Piano not centered. Stand not fully assembled or damaged. Incorrect piano model for the stand.	Adjust the piano's position until it is centered and stable. Inspect the stand for any loose connections or damage. Verify that your digital piano is a KORG B1 or B2+ model.

Specyfikacje

Model: STB1-BK
Kolor: Czarny
Tworzywo: Drewno
Wymiary produktu (dł. x szer. x wys.): 51.65 x 13.23 x 24.92 cala (131.2 x 33.6 x 63.3 cm)
Waga przedmiotu: 18.48 funtów (8.4 kg)
Wymagany montaż: Tak
Kompatybilne modele: KORG B1, KORG B2+ Digital Pianos

Gwarancja i wsparcie

For warranty information and customer support, please refer to the warranty card included with your product or visit the official KORG website. If you require assistance with assembly, troubleshooting, or have questions about your STB1-BK Digital Piano Stand, please contact KORG customer service.

KORG Official Webstrona: www.korg.com