Siamp 32454307 Mechanizm spłukiwania podwójnego do WC do spłuczki wbudowanej Instrukcja obsługi

Wstęp

This manual provides essential information for the installation, adjustment, operation, and maintenance of your Siamp 32454307 Dual Flush WC Mechanism. This product is specifically designed for the BATICHASSE 500 series built-in cisterns. Please read these instructions carefully before proceeding with installation or maintenance.

Konfiguracja i regulacja

The Siamp BATICHASSE 500 mechanism requires proper adjustment in conjunction with the float to ensure correct water levels and efficient flushing. The water level must be sufficiently high relative to the internal cylinder of the flush mechanism within the WC tank to correctly evacuate 6 liters of water.

1. Adjust the Float for the Full Flush (6L): Begin by adjusting the WC float to set the water level for the full 6-liter flush.
2. Adjust the Small Flush (3L): After setting the full flush, adjust the small flush mechanism. The full flush corresponds to 6 liters, and the small flush to 3 liters.
3. Test Water Evacuation: Fill the tank to ensure the water level reaches the correct height. Then, test the water evacuation, first with the 6-liter flush, and subsequently with the 3-liter flush of your WC.

Działanie

Once installed and adjusted, the dual flush mechanism operates by pressing the appropriate button on your WC flush plate. The larger button typically activates the 6-liter flush, while the smaller button activates the 3-liter flush, providing water conservation options.

Konserwacja

Regular maintenance ensures the longevity and proper functioning of your WC mechanism. Follow these steps for cleaning or component replacement:

1. Uzyskaj dostęp do mechanizmu: First, remove the spacer to gain access to the BATICHASSE mechanism.
2. Wyjąć ze zbiornika: Grasp the mechanism from the bottom to remove it from the WC tank.
3. Rozmontuj komponenty: Separate the body of the BATICHASSE mechanism from the toilet's drain valve. Detach the washer and then remove the seal if any of these components require replacement.
4. Ponowny montaż: Reposition each piece in the correct order to reassemble the flush mechanism. Refer to the detent located on the base of the product to ensure proper alignment during reassembly.

Rozwiązywanie problemów

If you encounter issues with your Siamp 32454307 mechanism, consider the following common problems and solutions:

• Ciągły przepływ wody: This often indicates a faulty seal or incorrect float adjustment. Check the seal for wear and ensure the float is set to the correct water level.
• Incomplete Flush: The water level might be too low, or the mechanism could be obstructed. Verify float adjustment and inspect the mechanism for any debris.
• Difficulty Activating Flush: Check the connection between the flush plate buttons and the mechanism's activation rods. Ensure they are properly aligned and not obstructed.

For persistent issues, it is recommended to consult a qualified plumber or contact Siamp obsługa klienta.

Specyfikacje

Informacje o gwarancji

The Siamp 32454307 Dual Flush WC Mechanism comes with a manufacturer's warranty of 10 lata. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation provided with your product or contact Siamp bezpośrednio.

Wsparcie

For further assistance, technical support, or inquiries regarding spare parts, please contact Siamp customer service. Contact details can typically be found on the manufacturer's official webmiejscu lub na opakowaniu produktu.